mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH 00/18] USB gadget overhaul
 2023-03-20 15:29 UTC  (8+ messages)
` [PATCH 01/18] usb: gadget: fastboot: Allocate IN requests when needed
` [PATCH 02/18] usb: gadget: drop gadget_chips.h
` [PATCH 07/18] driver: Add unregister_driver()
` [PATCH 14/18] usb: gadget: dfu: Assign super speed descriptors
` [PATCH 16/18] usb: gadget: mass storage: Add "
` [PATCH 17/18] usb: gadget: u_serial: Put back to list if shutdown
` [PATCH 18/18] usb: gadget multi: support USB Super Speed

[PATCH] Documentation: imx: improve reboot mode section
 2023-03-20 11:41 UTC 

[PATCH] arm: rockchip: add support for CM3 on IO board
 2023-03-20  8:19 UTC  (2+ messages)

[PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20
 2023-03-19 21:28 UTC  (6+ messages)
` [PATCH 1/3] mtd: nand: atmel: legacy: add 'algo' to use
` [PATCH 2/3] mtd: nand: atmel: legacy: use proper ecc_shift
` [PATCH 3/3] mtd: nand: atmel: legacy: remove superfluous code

[PATCH] commands: nand: add missing parameters to help
 2023-03-19 15:39 UTC 

[PATCH] commands: edit: fix typo in Kconfig help text
 2023-03-19 15:39 UTC 

Autoboot when idling at prompt possible?
 2023-03-17 17:35 UTC  (3+ messages)

[PATCH v2] Documentation: devicetree: list automatic boot argument fixups
 2023-03-17 12:41 UTC  (2+ messages)

[PATCH] Documentation: devicetree: list automatic boot argument fixups
 2023-03-17 11:15 UTC  (2+ messages)

[PATCH v1] ARM: boards: protonic-imx6: fix board probe for LANMCU
 2023-03-17 11:12 UTC  (2+ messages)

[PATCH v2 00/23] FlexSPI image/boot/update support
 2023-03-17 11:11 UTC  (25+ messages)
` [PATCH v2 01/23] spi: remove flash_platform_data support
` [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles
` [PATCH v2 03/23] ARM: i.MX8MM: add missing IMD_USED_OF image metadata entry
` [PATCH v2 04/23] ARM: i.MX8MN: add missing IMD_USED_OF image metadata entries
` [PATCH v2 05/23] mci: imx-esdhc-pbl: fix number of read blocks
` [PATCH v2 06/23] mci: imx-esdhc-pbl: refactor the esdhc_load_image function
` [PATCH v2 07/23] mci: imx-esdhc-pbl: move imx_load_image into common xload code
` [PATCH v2 08/23] ARM: i.MX8M: Add QSPI image load support
` [PATCH v2 09/23] ARM: i.MX bootsource: set QSPI instance
` [PATCH v2 10/23] ARM: i.MX8MM bootsource: fix QSPI boot source detection
` [PATCH v2 11/23] ARM: i.MX8M: Add QSPI boot support
` [PATCH v2 12/23] scripts: imx-image: convert flag variables into bool
` [PATCH v2 13/23] scripts: imx-image: header_v2: factor out offset parameter
` [PATCH v2 14/23] scripts: imx-image: header_v2: add header_len parameter
` [PATCH v2 15/23] scripts: imx-image: add FlexSPI image support
` [PATCH v2 16/23] filetype: add NXP FlexSPI filetype
` [PATCH v2 17/23] ARM: i.MX: bbu: rename IMX_INTERNAL_FLAG_ERASE to IMX_BBU_FLAG_ERASE
` [PATCH v2 18/23] ARM: i.MX: bbu: add filetype offset
` [PATCH v2 19/23] ARM: i.MX: bbu: add FlexSPI update handler
` [PATCH v2 20/23] ARM: i.MX8M: enable FlexSPI image support
` [PATCH v2 21/23] ARM: i.MX8M: add qspi barebox and barebox-environment partitions
` [PATCH v2 22/23] ARM: i.MX8M: add QSPI update handler
` [PATCH v2 23/23] Documentation: i.MX8M: add EVK QSPI NOR barebox installation documentation

v2023.03.0
 2023-03-17 11:09 UTC 

[PATCH] ARM: i.MX: boards: Use imx6_cpu_lowlevel_init()
 2023-03-17  9:44 UTC 

imx8 - gpc: Support IMX8 Lite
 2023-03-16 15:09 UTC  (4+ messages)

[PATCH v1 1/3] net: dsa: add adjust_link support
 2023-03-16 13:42 UTC  (3+ messages)
` [PATCH v1 2/3] net: dsa: sja1105: move port enable to adjust link code
` [PATCH v1 3/3] net: dsa: sja1105: fall back to default speed configuration if no link was detected

[PATCH] common: elf: use proper field to get segment memory size
 2023-03-16  9:51 UTC  (2+ messages)

[PATCH] imx-usb-loader: Don't try to transfer more data than contained in the image
 2023-03-16  9:00 UTC  (2+ messages)

[PATCH 0/3] MIPS: bootm: tiny fixes in do_bootm_elf()
 2023-03-16  8:59 UTC  (5+ messages)
` [PATCH 1/3] MIPS: bootm: do not free fdt pointer that contains an error
` [PATCH 2/3] MIPS: bootm: do not leak memory on error in of_overlay_load_firmware()
` [PATCH 3/3] MIPS: bootm: remove unnecessary phys/virt conversions

[PATCH v3 0/7] support overlays to the barebox live tree
 2023-03-16  8:58 UTC  (13+ messages)
` [PATCH v3 1/7] kbuild: Add target to build dtb overlay files
` [PATCH v3 2/7] driver: Add rescan hook to struct device
` [PATCH v3 3/7] i2c: implement rescan
` [PATCH v3 4/7] spi: Directly register SPI device
` [PATCH v3 5/7] spi: reduce scope of 'chip'
` [PATCH v3 6/7] spi: implement rescan
` [PATCH v3 7/7] of_overlay: Add option to apply overlay to live tree

[PATCH master] net: dsa: abort registration when master is unresolvable
 2023-03-16  8:42 UTC  (2+ messages)

[PATCH] lib: string: remove duplicated function
 2023-03-16  8:41 UTC  (2+ messages)

[PATCH] fs: tftp: Fix NULL pointer deref in file upload
 2023-03-15  9:53 UTC 

[PATCH] Let NET_USB select PHYLIB
 2023-03-15  8:05 UTC  (2+ messages)

[PATCH v3 0/2] Initial LS1021-IOT board support
 2023-03-14 17:37 UTC  (3+ messages)

[PATCH] ARM: dts: i.MX8MP: remove memory node
 2023-03-14 14:08 UTC  (9+ messages)

[PATCH master 1/2] of: partition: skip NVMEM partition setup partition parsing fails
 2023-03-14  9:02 UTC  (3+ messages)
` [PATCH master 2/2] commands: stat: fix UUID print

[PATCH v3 0/3] boards: qemu-virt: support passing in FIT public key
 2023-03-14  8:05 UTC  (6+ messages)
` [PATCH v3 1/3] boards: qemu-virt: apply overlay at postcore_initcall level
` [PATCH v3 2/3] boards: qemu-virt: compile overlay as such
` [PATCH v3 3/3] boards: qemu-virt: support passing in FIT public key

[PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support
 2023-03-13 14:43 UTC 

[PATCH 1/2] ARM: add LS1021A to Layerscape machine support
 2023-03-13 14:43 UTC 

[PATCH v2 1/4] of: base: factor out of_merge_nodes from of_copy_node
 2023-03-13 14:43 UTC  (11+ messages)
` [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device
` [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key

[PATCH 0/3] MIPS: dma-default: fix dma_sync_single_for_*
 2023-03-13 10:53 UTC  (4+ messages)
` [PATCH 1/3] dma: use dma/cpu conversions correctly in dma_map/unmap_single
` [PATCH 2/3] MIPS: dma-default: use virtual addresses when flushing caches
` [PATCH 3/3] MIPS: dma-default: do not flush caches in dma_sync_single_* excessively

[RESEND PATCH] kconfig: Proposed language extension for multiple builds
 2023-03-12 11:05 UTC  (5+ messages)

[PATCH v2 0/7] support overlays to the barebox live tree
 2023-03-10  8:37 UTC  (20+ messages)
` [PATCH v2 1/7] kbuild: Add target to build dtb overlay files
` [PATCH v2 2/7] driver: Add rescan hook to struct device
` [PATCH v2 3/7] i2c: implement rescan
` [PATCH v2 4/7] spi: Directly register SPI device
` [PATCH v2 5/7] spi: reduce scope of 'chip'
` [PATCH v2 6/7] spi: implement rescan
` [PATCH v2 7/7] of_overlay: Add option to apply overlay to live tree

SPI NOR w25q128 "flash operation timed out"
 2023-03-09 17:52 UTC  (4+ messages)

[PATCH] ARM: Do not print exception stacktrace in panic
 2023-03-09 14:26 UTC 

[PATCH] ARM: Enable frame pointers for arm64
 2023-03-09 14:07 UTC  (2+ messages)

[PATCH 00/21] FlexSPI image/boot/update support
 2023-03-09 11:41 UTC  (24+ messages)
` [PATCH 01/21] spi: remove flash_platform_data support
` [PATCH 02/21] bbu: make it possible to check multiple of-compatibles
` [PATCH 03/21] ARM: i.MX8MM: add missing IMD_USED_OF image metadata entry
` [PATCH 04/21] ARM: i.MX8MN: add missing IMD_USED_OF image metadata entries
` [PATCH 05/21] mci: imx-esdhc-pbl: fix number of read blocks
` [PATCH 06/21] mci: imx-esdhc-pbl: refactor the esdhc_load_image function
` [PATCH 07/21] mci: imx-esdhc-pbl: move imx_load_image into common xload code
` [PATCH 08/21] ARM: i.MX8M: Add QSPI image load support
` [PATCH 09/21] ARM: i.MX8MM bootsource: fix QSPI boot source detection
` [PATCH 10/21] ARM: i.MX8M: Add QSPI boot support
` [PATCH 11/21] scripts: imx-image: convert flag variables into bool
` [PATCH 12/21] scripts: imx-image: header_v2: factor out offset parameter
` [PATCH 13/21] scripts: imx-image: header_v2: add header_len parameter
` [PATCH 14/21] scripts: imx-image: add FlexSPI image support
` [PATCH 15/21] filetype: add NXP FlexSPI filetype
` [PATCH 16/21] ARM: i.MX: bbu: rename IMX_INTERNAL_FLAG_ERASE to IMX_BBU_FLAG_ERASE
` [PATCH 17/21] ARM: i.MX: bbu: add target device offset
` [PATCH 18/21] ARM: i.MX: bbu: add FlexSPI update handler
` [PATCH 19/21] ARM: i.MX8M: enable FlexSPI image support
` [PATCH 20/21] ARM: i.MX8M: add qspi barebox and barebox-environment partitions
` [PATCH 21/21] ARM: i.MX8M: add QSPI update handler

[PATCH 0/7] support overlays to the barebox live tree
 2023-03-09 11:36 UTC  (9+ messages)
` [PATCH 1/7] kbuild: Add target to build dtb overlay files
` [PATCH 2/7] driver: Add rescan hook to struct device
` [PATCH 3/7] i2c: implement rescan
` [PATCH 4/7] spi: Directly register SPI device
` [PATCH 5/7] spi: reduce scope of 'chip'
` [PATCH 6/7] spi: implement rescan
` [PATCH 7/7] of_overlay: Add option to apply overlay to live tree

[PATCH 1/4] ARM: i.MX8M: add option to install OP-TEE
 2023-03-09 11:04 UTC  (2+ messages)

[PATCH] blspec: support higher verbosity levels for boot
 2023-03-09 10:52 UTC  (2+ messages)

[PATCH 1/3] gpio: gpioinfo: use dev_name to get device name
 2023-03-09 10:51 UTC  (4+ messages)
` [PATCH 2/3] gpio: pca953x: sync DT compatibles with Linux
` [PATCH 3/3] gpio: pca953x: add optional support for regulator and reset GPIO

[PATCH master 1/5] net: dsa: realtek: rtl8365mb: add missing new line to log print
 2023-03-09 10:50 UTC  (2+ messages)

Subject: [PATCH 1/1] ARM:lib32: add architected timer
 2023-03-09 10:48 UTC  (2+ messages)

[PATCH] clk: Rockchip: Fix arrays out of bounds access
 2023-03-09 10:47 UTC 

[PATCH] arm: rockchip_v8_defconfig: disable DEBUG_LL
 2023-03-08 14:39 UTC 

[PATCH] power: reset: Fix array out of bounds access
 2023-03-08  9:34 UTC 

Subject: [PATCH V2 0/1] ARM: lib32: add architected timer
 2023-03-07 16:17 UTC 

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox