mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jules Maselbas <jmaselbas@zdiv.net>
To: Sascha Hauer <sha@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 11/13] ARM: boards: sunxi: Add initial support for the pinephone
Date: Thu, 1 Jun 2023 07:50:47 +0200	[thread overview]
Message-ID: <ZHgxt7mRiFRMtgDU@tour> (raw)
In-Reply-To: <20230530084236.GY17518@pengutronix.de>

Hi Sascha,

Thanks for your review

On Tue, May 30, 2023 at 10:42:36AM +0200, Sascha Hauer wrote:
> On Thu, May 25, 2023 at 01:43:26AM +0200, Jules Maselbas wrote:
> > Signed-off-by: Jules Maselbas <jmaselbas@zdiv.net>
> > ---
> >  arch/arm/boards/Makefile                    |   1 +
> >  arch/arm/boards/pine64-pinephone/Makefile   |   2 +
> >  arch/arm/boards/pine64-pinephone/board.c    |   0
> >  arch/arm/boards/pine64-pinephone/lowlevel.c | 104 ++++++++++++++++++++
> >  arch/arm/configs/pinephone_defconfig        |  12 +++
> >  arch/arm/dts/Makefile                       |   1 +
> >  arch/arm/dts/sun50i-a64-pinephone-1_2.dts   |   3 +
> >  arch/arm/mach-sunxi/Kconfig                 |  17 ++++
> >  images/Makefile.sunxi                       |   9 ++
> >  include/mach/sunxi/init.h                   |   4 +
> >  10 files changed, 153 insertions(+)
> >  create mode 100644 arch/arm/boards/pine64-pinephone/Makefile
> >  create mode 100644 arch/arm/boards/pine64-pinephone/board.c
> >  create mode 100644 arch/arm/boards/pine64-pinephone/lowlevel.c
> >  create mode 100644 arch/arm/configs/pinephone_defconfig
> >  create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1_2.dts
> > 
> > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> > index b204c257f6..f4796f5374 100644
> > --- a/arch/arm/boards/Makefile
> > +++ b/arch/arm/boards/Makefile
> > @@ -96,6 +96,7 @@ obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6)		+= phytec-som-imx6/
> >  obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7)		+= phytec-phycore-imx7/
> >  obj-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1)	+= phytec-phycore-stm32mp1/
> >  obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ)		+= phytec-som-imx8mq/
> > +obj-$(CONFIG_MACH_PINE64_PINEPHONE)		+= pine64-pinephone/
> >  obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3)	+= plathome-openblocks-ax3/
> >  obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6)	+= plathome-openblocks-a6/
> >  obj-$(CONFIG_MACH_PM9261)			+= pm9261/
> > diff --git a/arch/arm/boards/pine64-pinephone/Makefile b/arch/arm/boards/pine64-pinephone/Makefile
> > new file mode 100644
> > index 0000000000..092c31d6b2
> > --- /dev/null
> > +++ b/arch/arm/boards/pine64-pinephone/Makefile
> > @@ -0,0 +1,2 @@
> > +lwl-y += lowlevel.o
> > +obj-y += board.o
> > diff --git a/arch/arm/boards/pine64-pinephone/board.c b/arch/arm/boards/pine64-pinephone/board.c
> > new file mode 100644
> > index 0000000000..e69de29bb2
> > diff --git a/arch/arm/boards/pine64-pinephone/lowlevel.c b/arch/arm/boards/pine64-pinephone/lowlevel.c
> > new file mode 100644
> > index 0000000000..262d194864
> > --- /dev/null
> > +++ b/arch/arm/boards/pine64-pinephone/lowlevel.c
> > @@ -0,0 +1,104 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +#include <common.h>
> > +#include <debug_ll.h>
> > +#include <linux/sizes.h>
> > +#include <linux/bitops.h>
> > +#include <mach/sunxi/barebox-arm.h>
> 
> This file is missing in this series. Forgot to git add it?
ooops, yes forgot to add it.
There is almost nothing in it:
```
#include <asm/barebox-arm.h>

#define SUN50I_A64_ENTRY_FUNCTION(name, arg0, arg1, arg2) \
	ENTRY_FUNCTION_WITHSTACK(name, SUN50I_PBL_STACK_TOP, arg0, arg1, arg2)
```
that's all

> > +#include <mach/sunxi/init.h>
> > +#include <mach/sunxi/xload.h>
> > +#include <mach/sunxi/egon.h>
> > +#include <mach/sunxi/rmr_switch.h>
> > +#include <mach/sunxi/sun50i-regs.h>
> > +#include <mach/sunxi/sunxi-pinctrl.h>
> > +
> > +#ifdef DEBUG
> > +static void debug_led_rgb(int rgb)
> > +{
> > +	void __iomem *piobase = SUN50I_PIO_BASE_ADDR;
> > +	uint32_t clr, set = 0;
> > +	int r = rgb & 0xff0000;
> > +	int g = rgb & 0x00ff00;
> > +	int b = rgb & 0x0000ff;
> > +
> > +	clr = (1 << 19) | (1 << 18) | (1 << 20);
> > +	set |= r ? 1 << 19 : 0;
> > +	set |= g ? 1 << 18 : 0;
> > +	set |= b ? 1 << 20 : 0;
> > +
> > +	clrsetbits_le32(piobase + PIO_PD_DATA, clr, set);
> > +}
> > +
> > +static void debug_led_init(void)
> > +{
> > +	void __iomem *ccubase = SUN50I_CCU_BASE_ADDR;
> > +	void __iomem *piobase = SUN50I_PIO_BASE_ADDR;
> > +
> > +	/* PIO clock enable */
> > +	setbits_le32(ccubase + CCU_BUS_CLK_GATE2, BIT(5));
> > +	/* LED set output */
> > +	clrsetbits_le32(piobase + PIO_PD_CFG2, 0x000fff00, 0x00011100);
> > +}
> > +#else
> > +static void debug_led_rgb(int rgb) {}
> > +static void debug_led_init(void) {}
> > +#endif
> > +
> > +SUN50I_A64_ENTRY_FUNCTION(start_pine64_pinephone, r0, r1, r2)
> > +{
> > +	extern char __dtb_z_sun50i_a64_pinephone_1_2_start[];
> > +	void *fdt;
> > +	u32 size;
> > +
> > +	sunxi_switch_to_aarch64(.text_head_soc_header2, SUN50I_A64_RVBAR_IOMAP);
> > +
> > +	debug_led_init();
> > +	debug_led_rgb(0xffff00);
> > +
> > +	sun50i_cpu_lowlevel_init();
> > +	sun50i_uart_setup();
> > +
> > +	relocate_to_current_adr();
> > +	setup_c();
> > +
> > +	/* Skip SDRAM initialization if we run from it */
> > +	if (get_pc() < SUN50I_DRAM_ADDR) {
> > +		size = sun50i_a64_lpddr3_dram_init();
> > +		if (size == 0) {
> > +			puts_ll("FAIL: dram init\r\n");
> > +			goto reset;
> > +		}
> > +		puthex_ll(size);
> > +		putc_ll('\r');	putc_ll('\n');
> > +	}
> 
> How can we get here with SDRAM uninitialized? Is this for USB or JTAG
> boot?
Yes this is when not chain loaded, when started directly from USB via fel or
via JTAG.

> > +
> > +	puts_ll("now booting\r\n");
> > +	fdt = __dtb_z_sun50i_a64_pinephone_1_2_start + get_runtime_offset();
> > +	barebox_arm_entry(SUN50I_DRAM_ADDR, SZ_1G, fdt);
> > +
> > +reset:
> > +	debug_led_rgb(0xff0000);
> > +	sun50i_cpu_lowlevel_reset();
> > +}
> > +
> > +SUN50I_A64_ENTRY_FUNCTION(start_pine64_pinephone_xload, r0, r1, r2)
> > +{
> > +
> > +	sunxi_egon_header(.text_head_soc_header0);
> > +	sunxi_switch_to_aarch64(.text_head_soc_header1, SUN50I_A64_RVBAR_IOMAP);
> > +
> > +	debug_led_init();
> > +	debug_led_rgb(0xff0000);
> > +
> > +	sun50i_cpu_lowlevel_init();
> > +	sun50i_uart_setup();
> > +	debug_led_rgb(0xffff00);
> > +
> > +	relocate_to_current_adr();
> > +	setup_c();
> > +
> > +	sun50i_a64_lpddr3_dram_init();
> > +
> > +	debug_led_rgb(0xff0000);
> > +
> 
> You would have to place code here to continue booting, right? In that
> case you should add a comment to let the reader know that there's
> something missing here.
I forgot to add the code that search for barebox.bin and continue execution

> 
> debug_led_rgb(0xff0000) is the same color you used at the beginning of
> the function. Would it make more sense to use a different color?
Yes, I'll remove the first red color, I want to reserved it for error conditions.

> > +	sun50i_cpu_lowlevel_reset();
> 
> Maybe hang() here instead to give the user a chance to see the last
> color?
Yes, I put the reset so it will re-enter fel so the board could be reprogrammed
without needing a powercycle, but that's only true if there are no valid boot
entry in eMMC nor SD, IMHO this only makes sense for developpement/debugging.
 
> > +}
> > diff --git a/arch/arm/configs/pinephone_defconfig b/arch/arm/configs/pinephone_defconfig
> 
> In the hope that the config is not only suitable for the pinephone
> better name it sunxi_v8_defconfig.
Yes, currently use this config for the pine64 board, will make this change.

> 
> > +++ b/arch/arm/mach-sunxi/Kconfig
> > @@ -1,7 +1,24 @@
> >  if ARCH_SUNXI
> >  
> > +config ARCH_SUN50I_A64
> > +	bool
> > +	select CPU_V8
> > +	select CPU_SUPPORTS_64BIT_KERNEL
> > +	select CLOCKSOURCE_ARM_ARCHITECTED_TIMER
> > +	select PINCTRL_SUN50I_A64
> > +	select HAS_DEBUG_LL
> > +	select PBL_RELOCATABLE
> > +	select PBL_FULLY_PIC
> > +	help
> > +	  Allwiner A64 (sun50iw1) SoC
> 
> s/Allwiner/Allwinner/
ack

> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 



  reply	other threads:[~2023-06-01  5:52 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-24 23:43 [PATCH v2 00/13] Add support for Allwinner (sunxi) A64 SoC Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 01/13] Documentation: sunxi: Add some documentation Jules Maselbas
2023-05-29  9:24   ` Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 02/13] scripts: Add Allwinner eGON image support Jules Maselbas
2023-06-16 22:00   ` Marco Felsch
2023-06-17  7:25     ` Jules Maselbas
2023-06-20  4:52       ` Marco Felsch
2023-06-21  8:26       ` Sascha Hauer
2023-05-24 23:43 ` [PATCH v2 03/13] ARM: sunxi: introduce mach-sunxi Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 04/13] ARM: lds: Add SoC specific sections to go before .text_head_prologue Jules Maselbas
2023-06-01  6:34   ` Ahmad Fatoum
2023-06-01 21:20     ` Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 05/13] ARM: sunxi: Add lowlevel switch to aarch64 Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 06/13] ARM: sunxi: Add debug_ll Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 07/13] clk: Add clock driver for sun50i-a64 Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 08/13] pinctrl: Add sun50i-a64 pinctrl driver Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 09/13] mci: Add sunxi-mmc driver Jules Maselbas
2023-05-30  8:14   ` Sascha Hauer
2023-06-01  6:15     ` Jules Maselbas
2023-06-01  8:35       ` Sascha Hauer
2023-05-24 23:43 ` [PATCH v2 10/13] ARM: sunxi: Add sun50i SDRAM init Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 11/13] ARM: boards: sunxi: Add initial support for the pinephone Jules Maselbas
2023-05-30  8:42   ` Sascha Hauer
2023-06-01  5:50     ` Jules Maselbas [this message]
2023-06-01  6:00       ` Ahmad Fatoum
2023-06-01  6:19         ` Jules Maselbas
2023-06-01  6:36           ` Ahmad Fatoum
2023-06-01  7:09             ` Ahmad Fatoum
2023-05-24 23:43 ` [PATCH v2 12/13] ARM: boards: sunxi: Add pine64 board Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 13/13] ARM: sunxi: xload: Add helpers for chain-loading from SD-card Jules Maselbas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZHgxt7mRiFRMtgDU@tour \
    --to=jmaselbas@zdiv.net \
    --cc=barebox@lists.infradead.org \
    --cc=sha@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox