mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 13/13] ARM: i.MX28: Update defconfig
Date: Wed,  6 May 2020 10:17:16 +0200	[thread overview]
Message-ID: <20200506081716.20143-13-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200506081716.20143-1-s.hauer@pengutronix.de>

Enable more features:
- USB support
- wd command
- ubiformat
- regulator command

Changes:
- Disable all consoles (they are enabled using stdout-path property)
- Do not probe MMC/SD cards during probe

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/imx28_defconfig | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/imx28_defconfig b/arch/arm/configs/imx28_defconfig
index 1acc8dd94f..4442c79cc4 100644
--- a/arch/arm/configs/imx28_defconfig
+++ b/arch/arm/configs/imx28_defconfig
@@ -20,7 +20,9 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BLSPEC=y
+CONFIG_CONSOLE_ACTIVATE_NONE=y
 CONFIG_CONSOLE_ALLOW_COLOR=y
+CONFIG_PBL_CONSOLE=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_RESET_SOURCE=y
 CONFIG_CMD_DMESG=y
@@ -28,11 +30,13 @@ CONFIG_LONGHELP=y
 CONFIG_CMD_IOMEM=y
 CONFIG_CMD_IMD=y
 CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_REGULATOR=y
 # CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_GO=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_UIMAGE=y
 CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UBIFORMAT=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_LOADENV=y
 CONFIG_CMD_PRINTENV=y
@@ -72,16 +76,20 @@ CONFIG_CMD_NANDTEST=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_LED_TRIGGER=y
 CONFIG_CMD_USBGADGET=y
+CONFIG_CMD_WD=y
 CONFIG_CMD_BAREBOX_UPDATE=y
 CONFIG_CMD_OF_NODE=y
 CONFIG_CMD_OF_PROPERTY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
 CONFIG_NET=y
-CONFIG_OFDEVICE=y
 CONFIG_OF_BAREBOX_DRIVERS=y
 CONFIG_DRIVER_SERIAL_AUART=y
 CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_NET_USB=y
+CONFIG_NET_USB_ASIX=y
+CONFIG_USB_NET_AX88179_178A=y
+CONFIG_NET_USB_SMSC95XX=y
 CONFIG_DRIVER_SPI_MXS=y
 CONFIG_I2C=y
 CONFIG_MTD=y
@@ -89,6 +97,10 @@ CONFIG_NAND=y
 CONFIG_NAND_MXS=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_USB_HOST=y
+CONFIG_USB_IMX_CHIPIDEA=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DFU=y
 CONFIG_USB_GADGET_SERIAL=y
@@ -97,7 +109,6 @@ CONFIG_USB_GADGET_FASTBOOT_CMD_OEM=y
 CONFIG_VIDEO=y
 CONFIG_DRIVER_VIDEO_STM=y
 CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
 CONFIG_MCI_MXS=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
@@ -108,6 +119,7 @@ CONFIG_WATCHDOG_MXS28=y
 CONFIG_MXS_APBH_DMA=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED=y
+CONFIG_GENERIC_PHY=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_TFTP=y
 CONFIG_FS_NFS=y
-- 
2.26.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2020-05-06  8:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-06  8:17 [PATCH 01/13] net: fec_imx: Make ptp clock optional Sascha Hauer
2020-05-06  8:17 ` [PATCH 02/13] net: fec_imx: Return with an error when mandatory clock is missing Sascha Hauer
2020-05-06  8:17 ` [PATCH 03/13] clk: mxs: Do not enable enet_out clock Sascha Hauer
2020-05-06  8:17 ` [PATCH 04/13] arm: mxs: Add Kconfig option for device tree boards Sascha Hauer
2020-05-06  8:17 ` [PATCH 05/13] clk: mxs: Fix clock numbering Sascha Hauer
2020-05-06  8:17 ` [PATCH 06/13] clk imx28: Add USB clocks Sascha Hauer
2020-05-06  8:17 ` [PATCH 07/13] clk: mxs: Use device tree provided clock lookups Sascha Hauer
2020-05-06  8:17 ` [PATCH 08/13] ARM: mxs: Increase VDDD voltage to match specification Sascha Hauer
2020-05-06  8:17 ` [PATCH 09/13] filetype: Add filetype for i.MX23/28 SD card images Sascha Hauer
2020-05-06  8:17 ` [PATCH 10/13] watchdog: i.MX28: Add device tree support Sascha Hauer
2020-05-06  8:17 ` [PATCH 11/13] usb: imx-usb-phy: Add delay Sascha Hauer
2020-05-06  8:17 ` [PATCH 12/13] usb: i.MX: Add i.MX28 support Sascha Hauer
2020-05-06  8:17 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200506081716.20143-13-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox