mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 08/13] ARM: mxs: Increase VDDD voltage to match specification
Date: Wed,  6 May 2020 10:17:11 +0200	[thread overview]
Message-ID: <20200506081716.20143-8-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200506081716.20143-1-s.hauer@pengutronix.de>

Adoption of U-Boot commit:

| commit b4a2cdc13ed886b981e8fcd3087293ba9296f17f
| Author: Marek Vasut <marex@denx.de>
| Date:   Tue Oct 15 18:26:57 2019 +0200
|
|     arm: mxs: Increase VDDD voltage to match specification
|
|     According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating
|     Conditions, page 16, the VDDD should be set to 1.55V when the CPU is
|     operating at 454MHz. This is the case in U-Boot, hence increase the
|     VDDD voltage. This fixes instability when performing TFTP transfers.
|     Increase the brownout threshold to 1.4V. The documentation recommends
|     1.45V setting for the brownout, however, this triggers failure during
|     power block init, so keep the brownout slightly lower.
|
|     Signed-off-by: Marek Vasut <marex@denx.de>
|     Cc: Stefano Babic <sbabic@denx.de>
|     Reviewed-by: Fabio Estevam <festevam@gmail.com>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/power-init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
index ca7c349d7f..c89f1f5f5d 100644
--- a/arch/arm/mach-mxs/power-init.c
+++ b/arch/arm/mach-mxs/power-init.c
@@ -1172,7 +1172,7 @@ static void mx23_ungate_power(void)
 	writel(MX23_POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
 }
 
-struct mxs_power_ctrl mxs_vddd_default    = { .target = 1500, .brownout = 1325 };
+struct mxs_power_ctrl mxs_vddd_default    = { .target = 1550, .brownout = 1400 };
 struct mxs_power_ctrl mxs_vdda_default    = { .target = 1800, .brownout = 1650 };
 struct mxs_power_ctrl mxs_vddio_default   = { .target = 3300, .brownout = 3150 };
 struct mxs_power_ctrl mx23_vddmem_default = { .target = 2500, .brownout = 1700 };
-- 
2.26.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-05-06  8:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-06  8:17 [PATCH 01/13] net: fec_imx: Make ptp clock optional Sascha Hauer
2020-05-06  8:17 ` [PATCH 02/13] net: fec_imx: Return with an error when mandatory clock is missing Sascha Hauer
2020-05-06  8:17 ` [PATCH 03/13] clk: mxs: Do not enable enet_out clock Sascha Hauer
2020-05-06  8:17 ` [PATCH 04/13] arm: mxs: Add Kconfig option for device tree boards Sascha Hauer
2020-05-06  8:17 ` [PATCH 05/13] clk: mxs: Fix clock numbering Sascha Hauer
2020-05-06  8:17 ` [PATCH 06/13] clk imx28: Add USB clocks Sascha Hauer
2020-05-06  8:17 ` [PATCH 07/13] clk: mxs: Use device tree provided clock lookups Sascha Hauer
2020-05-06  8:17 ` Sascha Hauer [this message]
2020-05-06  8:17 ` [PATCH 09/13] filetype: Add filetype for i.MX23/28 SD card images Sascha Hauer
2020-05-06  8:17 ` [PATCH 10/13] watchdog: i.MX28: Add device tree support Sascha Hauer
2020-05-06  8:17 ` [PATCH 11/13] usb: imx-usb-phy: Add delay Sascha Hauer
2020-05-06  8:17 ` [PATCH 12/13] usb: i.MX: Add i.MX28 support Sascha Hauer
2020-05-06  8:17 ` [PATCH 13/13] ARM: i.MX28: Update defconfig Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200506081716.20143-8-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox