mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] ARM: i.MX7/8M: reliably detect serial boot
@ 2021-04-12 22:24 Ahmad Fatoum
  2021-04-13  7:39 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Ahmad Fatoum @ 2021-04-12 22:24 UTC (permalink / raw)
  To: barebox; +Cc: Ahmad Fatoum

While not documented in the reference manual,
info->boot_device_type was observed to equal 15 when:

 - SoC is strapped for serial boot
 - SoC falls back into serial boot after failed strapped primary

The latter went so far undetected. Fix this.
What's not tested is:

 - SoC falls back into serial boot after failed primary from fuses
 - SoC warm resets directly into serial boot because of BMODE

If those works, we could drop the imx6_bootsource_serial check at the
beginning, but for now, just leave it be.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/mach-imx/boot.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-imx/boot.c b/arch/arm/mach-imx/boot.c
index c3cf4b85ff25..e9b5a4944390 100644
--- a/arch/arm/mach-imx/boot.c
+++ b/arch/arm/mach-imx/boot.c
@@ -506,6 +506,9 @@ static void __imx7_get_boot_source(enum bootsource *src, int *instance,
 	case 5:
 		*src = BOOTSOURCE_NOR;
 		break;
+	case 15:
+		*src = BOOTSOURCE_SERIAL;
+		break;
 	default:
 		break;
 	}
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: i.MX7/8M: reliably detect serial boot
  2021-04-12 22:24 [PATCH] ARM: i.MX7/8M: reliably detect serial boot Ahmad Fatoum
@ 2021-04-13  7:39 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2021-04-13  7:39 UTC (permalink / raw)
  To: Ahmad Fatoum; +Cc: barebox

On Tue, Apr 13, 2021 at 12:24:16AM +0200, Ahmad Fatoum wrote:
> While not documented in the reference manual,
> info->boot_device_type was observed to equal 15 when:
> 
>  - SoC is strapped for serial boot
>  - SoC falls back into serial boot after failed strapped primary
> 
> The latter went so far undetected. Fix this.
> What's not tested is:
> 
>  - SoC falls back into serial boot after failed primary from fuses
>  - SoC warm resets directly into serial boot because of BMODE
> 
> If those works, we could drop the imx6_bootsource_serial check at the
> beginning, but for now, just leave it be.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  arch/arm/mach-imx/boot.c | 3 +++
>  1 file changed, 3 insertions(+)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/mach-imx/boot.c b/arch/arm/mach-imx/boot.c
> index c3cf4b85ff25..e9b5a4944390 100644
> --- a/arch/arm/mach-imx/boot.c
> +++ b/arch/arm/mach-imx/boot.c
> @@ -506,6 +506,9 @@ static void __imx7_get_boot_source(enum bootsource *src, int *instance,
>  	case 5:
>  		*src = BOOTSOURCE_NOR;
>  		break;
> +	case 15:
> +		*src = BOOTSOURCE_SERIAL;
> +		break;
>  	default:
>  		break;
>  	}
> -- 
> 2.29.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-04-13  7:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-12 22:24 [PATCH] ARM: i.MX7/8M: reliably detect serial boot Ahmad Fatoum
2021-04-13  7:39 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox