mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code
Date: Wed,  5 May 2021 13:08:52 +0300	[thread overview]
Message-ID: <20210505100900.88141-2-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20210505100900.88141-1-antonynpavlov@gmail.com>

After migrating to PBL we can't use nmon assembler macro
in C code anymore. Some changes are introduced to invoke
nmon from PBL C code:

  * use 'lla' macro instruction instead of 'la';
  * don't touch the 'ra' register, use 'a2' instead;
  * add wrapper C function for nmon.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 arch/riscv/boot/Makefile            |  1 +
 arch/riscv/boot/nmon_entry.S        | 13 ++++++++++++
 arch/riscv/include/asm/riscv_nmon.h | 33 ++++++++++++++---------------
 3 files changed, 30 insertions(+), 17 deletions(-)

diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 968a826d16..80f63a4a0a 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += start.o
 pbl-y += entry.o uncompress.o
+pbl-y += nmon_entry.o
 pbl-$(CONFIG_BOARD_GENERIC_DT) += board-dt-2nd.o
diff --git a/arch/riscv/boot/nmon_entry.S b/arch/riscv/boot/nmon_entry.S
new file mode 100644
index 0000000000..9b30b50627
--- /dev/null
+++ b/arch/riscv/boot/nmon_entry.S
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/sections.h>
+
+#include "mach/debug_ll.h"
+#include "asm/riscv_nmon.h"
+
+.section .text_bare_init
+
+ENTRY(__barebox_nmon_entry)
+	riscv_nmon
+	ret
+ENDPROC(__barebox_nmon_entry)
diff --git a/arch/riscv/include/asm/riscv_nmon.h b/arch/riscv/include/asm/riscv_nmon.h
index caf213cdd8..11b19ab35b 100644
--- a/arch/riscv/include/asm/riscv_nmon.h
+++ b/arch/riscv/include/asm/riscv_nmon.h
@@ -20,9 +20,8 @@
 
 .macro nmon_outs msg
 
-	la	a1, \msg
-
-	jal	_nmon_outs
+	lla	a1, \msg
+	jal	a2, _nmon_outs
 
 .endm
 
@@ -73,7 +72,7 @@ nmon_main:
 	li	a0, 'q'
 	bne	s0, a0, 3f
 
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
 	j	nmon_exit
 
@@ -90,12 +89,12 @@ nmon_main:
 	j	nmon_main_help
 
 nmon_cmd_d:
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
 	li	a0, ' '
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
-	jal	_nmon_gethexw
+	jal	a2, _nmon_gethexw
 
 	nmon_outs	msg_nl
 
@@ -105,28 +104,28 @@ nmon_cmd_d:
 	j	nmon_main
 
 nmon_cmd_w:
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
 	li	a0, ' '
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
-	jal	_nmon_gethexw
+	jal	a2, _nmon_gethexw
 	move	s2, s0
 
 	li	a0, ' '
-	jal	_nmon_outc_a0
-	jal	_nmon_gethexw
+	jal	a2, _nmon_outc_a0
+	jal	a2, _nmon_gethexw
 
 	sw	s0, 0(s2)
 	j	nmon_main
 
 nmon_cmd_g:
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
 	li	a0, ' '
-	jal	_nmon_outc_a0
+	jal	a2, _nmon_outc_a0
 
-	jal	_nmon_gethexw
+	jal	a2, _nmon_gethexw
 	move	s2, s0
 
 	nmon_outs	msg_nl
@@ -136,7 +135,7 @@ nmon_cmd_g:
 
 _nmon_outc_a0:
 	debug_ll_outc_a0
-	jr	ra
+	jr	a2
 
 _nmon_outs:
 
@@ -202,7 +201,7 @@ _get_hex_digit:
 	move	s0, t2
 
 _nmon_jr_ra_exit:
-	jr	ra
+	jr	a2
 
 msg_prompt:
 	.asciz "\r\nnmon> "
-- 
2.31.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2021-05-05 10:10 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-05 10:08 [PATCH 0/9] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
2021-05-05 10:08 ` Antony Pavlov [this message]
2021-05-05 10:27   ` [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-05 10:28   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 3/9] serial: add litex UART driver Antony Pavlov
2021-05-05 10:32   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-05 10:35   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 5/9] spi: add litex spiflash driver Antony Pavlov
2021-05-05 10:39   ` Ahmad Fatoum
2021-05-05 15:10     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 6/9] net: add LiteEth driver Antony Pavlov
2021-05-06 10:10   ` Roland Hieber
2021-05-06 11:33     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 7/9] RISC-V: add initial LiteX SoC support Antony Pavlov
2021-05-05 10:16   ` Ahmad Fatoum
2021-05-05 10:45   ` Jan Lübbe
2021-05-05 15:23     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 8/9] RISC-V: add litex-linux board support Antony Pavlov
2021-05-05 10:19   ` Ahmad Fatoum
2021-05-05 10:36     ` Antony Pavlov
2021-05-05 10:09 ` [PATCH 9/9] RISC-V: add litex_linux_defconfig Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210505100900.88141-2-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox