From: Antony Pavlov <antonynpavlov@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org, Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: Re: [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory
Date: Fri, 7 May 2021 14:27:03 +0300 [thread overview]
Message-ID: <20210507142703.33e2609ca0598e8050393b8c@gmail.com> (raw)
In-Reply-To: <7e99b38d-ea07-ff00-21b9-6123212b7a4c@pengutronix.de>
On Wed, 5 May 2021 12:21:25 +0200
Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
Hi Sascha!
> Hello Antony,
>
> On 05.05.21 12:18, Antony Pavlov wrote:
> > On Tue, 27 Apr 2021 22:23:03 +0200
> > Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >
> > Hi Ahmad!
> >
> > Could you please rebase this patchseries on top of pengutronix next branch
> > and push it to github?
> >
> > My latest LiteX SoC support patchseries introduces mach-litex/include/mach/debug_ll.h.
>
> I just commented that on your series :D
> next Branch already contains this series.
>
> By the way, there's now lore.barebox.org, which allows you
> to download patch series as mbox via b4 (or a web browser).
Can we add lore.barebox.org link to the main page of https://www.barebox.org/ ?
I suppose we can add RISC-V to list of computer architectures supported by barebox
at https://www.barebox.org/.
> Cheers,
> Ahmad
>
> >
> >> With the recent changes, we can now delete mach-erizo. Do so.
> >>
> >> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> >> ---
> >> arch/riscv/Kconfig.socs | 2 +-
> >> arch/riscv/Makefile | 13 -------------
> >> .../include/mach => include/asm}/debug_ll.h | 18 +++++++-----------
> >> arch/riscv/mach-erizo/Makefile | 3 ---
> >> common/Kconfig | 5 +++++
> >> 5 files changed, 13 insertions(+), 28 deletions(-)
> >> rename arch/riscv/{mach-erizo/include/mach => include/asm}/debug_ll.h (57%)
> >> delete mode 100644 arch/riscv/mach-erizo/Makefile
> >>
> >> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> >> index 093bca33806c..ea5ae0a6e9b5 100644
> >> --- a/arch/riscv/Kconfig.socs
> >> +++ b/arch/riscv/Kconfig.socs
> >> @@ -3,7 +3,7 @@ menu "SoC selection"
> >> config SOC_ERIZO
> >> bool "Erizo SoC"
> >> depends on ARCH_RV32I
> >> - select HAS_DEBUG_LL
> >> + select HAS_ASM_DEBUG_LL
> >> select HAS_NMON
> >> select USE_COMPRESSED_DTB
> >> select RISCV_M_MODE
> >> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >> index 09a94d69b220..0b1278936d91 100644
> >> --- a/arch/riscv/Makefile
> >> +++ b/arch/riscv/Makefile
> >> @@ -19,8 +19,6 @@ LDFLAGS_pbl += $(riscv-ldflags-y)
> >> cflags-y += $(riscv-cflags-y)
> >> LDFLAGS_barebox += -nostdlib
> >>
> >> -machine-$(CONFIG_SOC_ERIZO) := erizo
> >> -
> >> LDFLAGS_barebox += $(riscv-ldflags-y)
> >>
> >> ifndef CONFIG_MODULES
> >> @@ -31,21 +29,10 @@ endif
> >>
> >> KBUILD_BINARY := barebox.bin
> >>
> >> -machdirs := $(patsubst %,arch/riscv/mach-%/,$(machine-y))
> >> -
> >> -KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
> >> -
> >> archprepare: maketools
> >>
> >> PHONY += maketools
> >>
> >> -ifneq ($(machine-y),)
> >> -MACH := arch/riscv/mach-$(machine-y)/
> >> -else
> >> -MACH :=
> >> -endif
> >> -
> >> -common-y += $(MACH)
> >> common-y += arch/riscv/boards/
> >> common-y += arch/riscv/cpu/
> >> common-y += arch/riscv/lib/
> >> diff --git a/arch/riscv/mach-erizo/include/mach/debug_ll.h b/arch/riscv/include/asm/debug_ll.h
> >> similarity index 57%
> >> rename from arch/riscv/mach-erizo/include/mach/debug_ll.h
> >> rename to arch/riscv/include/asm/debug_ll.h
> >> index a20acfcdfb79..755ed09786d5 100644
> >> --- a/arch/riscv/mach-erizo/include/mach/debug_ll.h
> >> +++ b/arch/riscv/include/asm/debug_ll.h
> >> @@ -1,18 +1,10 @@
> >> /* SPDX-License-Identifier: GPL-2.0-only */
> >> /*
> >> * Copyright (C) 2017 Antony Pavlov <antonynpavlov@gmail.com>
> >> - *
> >> - * This file is part of barebox.
> >> - *
> >> - * This program is distributed in the hope that it will be useful,
> >> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> - * GNU General Public License for more details.
> >> - *
> >> */
> >>
> >> -#ifndef __MACH_ERIZO_DEBUG_LL__
> >> -#define __MACH_ERIZO_DEBUG_LL__
> >> +#ifndef __ASM_DEBUG_LL__
> >> +#define __ASM_DEBUG_LL__
> >>
> >> /** @file
> >> * This File contains declaration for early output support
> >> @@ -20,6 +12,8 @@
> >>
> >> #include <linux/kconfig.h>
> >>
> >> +#ifdef CONFIG_DEBUG_ERIZO
> >> +
> >> #define DEBUG_LL_UART_ADDR 0x90000000
> >> #define DEBUG_LL_UART_SHIFT 2
> >> #define DEBUG_LL_UART_IOSIZE32
> >> @@ -30,4 +24,6 @@
> >>
> >> #include <asm/debug_ll_ns16550.h>
> >>
> >> -#endif /* __MACH_ERIZO_DEBUG_LL__ */
> >> +#endif
> >> +
> >> +#endif /* __ASM_DEBUG_LL__ */
> >> diff --git a/arch/riscv/mach-erizo/Makefile b/arch/riscv/mach-erizo/Makefile
> >> deleted file mode 100644
> >> index d9c51e74c379..000000000000
> >> --- a/arch/riscv/mach-erizo/Makefile
> >> +++ /dev/null
> >> @@ -1,3 +0,0 @@
> >> -# just to build a built-in.o. Otherwise compilation fails when no o-files is
> >> -# created.
> >> -obj- += dummy.o
> >> diff --git a/common/Kconfig b/common/Kconfig
> >> index b10fb45b722d..6d7a1c6b0494 100644
> >> --- a/common/Kconfig
> >> +++ b/common/Kconfig
> >> @@ -1342,6 +1342,11 @@ config DEBUG_RPI3_MINI_UART
> >> help
> >> Say Y here if you want low-level debugging support on
> >> RaspberryPi 3 board mini UART.
> >> +
> >> +config DEBUG_ERIZO
> >> + bool "Erizo ns16550 port"
> >> + depends on SOC_ERIZO
> >> +
> >> endchoice
> >>
> >> config DEBUG_IMX_UART_PORT
> >> --
> >> 2.29.2
> >>
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-05-07 11:28 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-27 20:22 [PATCH 01/12] clk: add SiFive PRCI clock controller support Ahmad Fatoum
2021-04-27 20:22 ` [PATCH 02/12] serial: implement SiFive UART support Ahmad Fatoum
2021-04-27 20:23 ` [PATCH 03/12] debug_ll: support <asm/debug_ll.h> to get rid of mach directories Ahmad Fatoum
2021-04-27 20:23 ` [PATCH 04/12] RISC-V: support multi-image for all machines Ahmad Fatoum
2021-05-03 11:33 ` Sascha Hauer
2021-05-03 11:39 ` Ahmad Fatoum
2021-05-03 12:00 ` Sascha Hauer
2021-04-27 20:23 ` [PATCH 05/12] RISC-V: erizo: restrict to RV32I Ahmad Fatoum
2021-04-27 20:23 ` [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory Ahmad Fatoum
2021-05-05 10:18 ` Antony Pavlov
2021-05-05 10:21 ` Ahmad Fatoum
2021-05-07 11:27 ` Antony Pavlov [this message]
2021-04-27 20:23 ` [PATCH 07/12] RISC-V: add SBI based cpuinfo Ahmad Fatoum
2021-04-27 20:23 ` [PATCH 08/12] gpio: gpio-generic-platform: remove unused non-DT support Ahmad Fatoum
2021-04-27 20:23 ` [PATCH 09/12] gpio: generic: sync with upstream Linux gpio-mmio driver Ahmad Fatoum
2021-05-06 23:45 ` Antony Pavlov
2021-04-27 20:23 ` [PATCH 10/12] gpio: add SiFive GPIO controller support Ahmad Fatoum
2021-04-27 20:23 ` [PATCH 11/12] net: macb: add SiFive support Ahmad Fatoum
2021-05-17 6:39 ` Sascha Hauer
2021-04-27 20:23 ` [PATCH 12/12] RISC-V: sifive: add HiFive board support Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210507142703.33e2609ca0598e8050393b8c@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox