From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org, Robin van der Gracht <robin@protonic.nl>
Subject: Re: [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping
Date: Tue, 25 May 2021 06:58:01 +0200 [thread overview]
Message-ID: <20210525045801.GI19819@pengutronix.de> (raw)
In-Reply-To: <20210518083707.15428-1-o.rempel@pengutronix.de>
On Tue, May 18, 2021 at 10:37:07AM +0200, Oleksij Rempel wrote:
> If on-die termination is enabled, the RXC pin of iMX6 will be pulled
> high. Since we already have an 10K pull-down on board, the RXC level on
> PHY reset will be ~800mV, which is mostly interpreted as 1. On some
> reboots we get 0 instead and kernel can't detect the PHY properly.
>
> Since the default 0x020e07ac value is 0, it is sufficient to remove this
> entry from the affected imxcfg files.
>
> Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from
> 4 to 0.
>
> Reported-by: Robin van der Gracht <robin@protonic.nl>
> Fixes: 00adc1e33ef8 ("ARM: add imx6 based Protonic boads")
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg | 1 -
> 1 file changed, 1 deletion(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2021-05-25 4:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-18 8:37 Oleksij Rempel
2021-05-25 4:58 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210525045801.GI19819@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
--cc=robin@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox