mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 13/20] mci: allocate sector_buf on demand
Date: Mon, 31 May 2021 09:38:14 +0200
Message-ID: <20210531073821.15257-14-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20210531073821.15257-1-a.fatoum@pengutronix.de>

The MCI core uses a common bounce buffer for unaligned block
reads/writes as well as sd_change_freq. This buffer is allocated at
device initcall level, same as the MMC drivers themselves.

For CONFIG_MCI_STARTUP=y configurations this seems to imply that
sd_change_freq could attempt writing the NULL page. Avoid this
by just allocating the buffer when the first MMC device is registered.

This doesn't solve all issues; so add a comment noting that.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/mci/mci-core.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 70a8b971ca6d..196fecdbd090 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1789,6 +1789,11 @@ static int mci_card_probe(struct mci *mci)
 		mci->cdevname = basprintf("disk%d", disknum);
 	}
 
+	if (!sector_buf)
+		sector_buf = dma_alloc(SECTOR_SIZE);
+
+	/* FIXME we don't check sector_buf against the device dma mask here */
+
 	rc = mci_startup(mci);
 	if (rc) {
 		dev_warn(&mci->dev, "Card's startup fails with %d\n", rc);
@@ -1850,15 +1855,6 @@ static int mci_set_probe(struct param_d *param, void *priv)
 	return 0;
 }
 
-static int mci_init(void)
-{
-	sector_buf = dma_alloc(SECTOR_SIZE);
-
-	return 0;
-}
-
-device_initcall(mci_init);
-
 int mci_detect_card(struct mci_host *host)
 {
 	int rc;
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2021-05-31  7:39 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-31  7:38 [PATCH 00/20] RISC-V: prepare for BeagleV pre-production board support Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 01/20] RISC-V: socs: add Kconfig entry for StarFive JH7100 Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 02/20] net: designware: add support for IP integrated into StarFive SoC Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 03/20] mfd: add TI TPS65086 PMIC restart driver Ahmad Fatoum
2021-06-07  6:44   ` Sascha Hauer
2021-05-31  7:38 ` [PATCH 04/20] mtd: spi-nor: cadence: fix 64-bit issues Ahmad Fatoum
2021-06-07  6:51   ` Sascha Hauer
2021-05-31  7:38 ` [PATCH 05/20] nvmem: add StarFive OTP support Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 06/20] RISC-V: dma: support multiple dma_alloc_coherent backends Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 07/20] RISC-V: support incoherent I-Cache Ahmad Fatoum
2021-05-31  7:40   ` Ahmad Fatoum
2021-06-07  7:33     ` Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 08/20] soc: add support for StarFive JH7100 incoherent interconnect Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 09/20] soc: sifive: l2_cache: enable maximum available cache ways Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 10/20] net: designware: fix 64-bit incompatibilities Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 11/20] dma: support marking SRAM for coherent DMA use Ahmad Fatoum
2021-06-07  7:34   ` Sascha Hauer
2021-06-07  7:40     ` Ahmad Fatoum
2021-06-07  7:39   ` Sascha Hauer
2021-05-31  7:38 ` [PATCH 12/20] mci: allocate DMA-able memory Ahmad Fatoum
2021-05-31  7:38 ` Ahmad Fatoum [this message]
2021-05-31  7:38 ` [PATCH 14/20] dma: allocate 32-byte aligned buffers by default Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 15/20] mci: dw_mmc: enable use on 64-bit CPUs Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 16/20] mci: dw_mmc: match against generic "snps, dw-mshc" compatible Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 17/20] clk: add initial StarFive clock support Ahmad Fatoum
2021-05-31  8:41   ` Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 18/20] reset: add StarFive reset controller driver Ahmad Fatoum
2021-06-07  8:00   ` Sascha Hauer
2021-05-31  7:38 ` [PATCH 19/20] watchdog: add StarFive watchdog driver Ahmad Fatoum
2021-05-31  7:38 ` [PATCH 20/20] hw_random: add driver for RNG on StarFive SoC Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210531073821.15257-14-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

mail archive of the barebox mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lore.barebox.org/barebox/0 barebox/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 barebox barebox/ https://lore.barebox.org/barebox \
		barebox@lists.infradead.org
	public-inbox-index barebox

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git