mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: Re: [PATCH 0/8 v4] RISC-V: add LiteX SoC support
Date: Tue, 17 Aug 2021 13:10:21 +0300	[thread overview]
Message-ID: <20210817131021.674041b1630520e20dbe6995@gmail.com> (raw)
In-Reply-To: <20210817100435.114756-1-antonynpavlov@gmail.com>

On Tue, 17 Aug 2021 13:04:27 +0300
Antony Pavlov <antonynpavlov@gmail.com> wrote:

I have used git format-patch in a inproper way. Sorry!

I'll resend the patchseries.


> Changes since v3:
> 
>   * rebased on top of next branch;
>   * the "console: support set baudrate for fixed baudrate drivers" patch
>     is introduced so the "litex serial: add setbrg callback" patch is dropped;
>   * update mac0 IP-block base addresses in litex dts according to latest
>     SoC configuration.
> 
> Changes since v2:
> 
>   * rebase on top of master branch (f873c7ff2497) +
>     "RISC-V: extend multi-image to support both S- and M-Mode"
>     (http://lists.infradead.org/pipermail/barebox/2021-May/036086.html).
>   * "litex serial: add setbrg callback" patch by Marek Czerski is added
>     for review;
>   * fix "clocksource: timer-riscv: select CSR from device tree" patch;
>   * change gpio IP-block base addresses in litex dts;
>   * gpio-74xx-mmio uses device_get_match_data() now.
> 
> Changes since v1:
> 
>   * rebased on top of next branch;
>   * new patches are introduced:
>     * clocksource: timer-riscv: select CSR from device tree
>     * RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
>     * RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
>   * almost all of Ahmad's notes are fixed (e.g. unused header files inclusions are dropped);
>   * NOT FIXED: gpio-74xx-mmio still uses dev_get_drvdata(), not device_get_match_data()
> 
> 
> Antony Pavlov (8):
>   clocksource: timer-riscv: select CSR from device tree
>   serial: add litex UART driver
>   console: support set baudrate for fixed baudrate drivers
>   gpio: add driver for 74xx-ICs with MMIO access
>   spi: add litex spiflash driver
>   net: add LiteEth driver
>   RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
>   RISC-V: add litex_linux_defconfig
> 
>  arch/riscv/Kconfig.socs                  |  14 +
>  arch/riscv/boards/Makefile               |   1 +
>  arch/riscv/boards/litex-linux/Makefile   |   3 +
>  arch/riscv/boards/litex-linux/lowlevel.c |  22 ++
>  arch/riscv/configs/litex_linux_defconfig |  75 +++++
>  arch/riscv/dts/Makefile                  |   1 +
>  arch/riscv/dts/erizo.dtsi                |   2 +
>  arch/riscv/dts/litex-linux.dts           |  92 ++++++
>  arch/riscv/dts/litex_soc_linux.dtsi      |  49 +++
>  arch/riscv/include/asm/debug_ll.h        |   3 +
>  arch/riscv/include/asm/debug_ll_litex.h  | 123 ++++++++
>  common/Kconfig                           |   4 +
>  common/console.c                         |  10 +-
>  drivers/clocksource/timer-riscv.c        |  24 +-
>  drivers/gpio/Kconfig                     |  14 +
>  drivers/gpio/Makefile                    |   1 +
>  drivers/gpio/gpio-74xx-mmio.c            | 165 ++++++++++
>  drivers/net/Kconfig                      |   8 +
>  drivers/net/Makefile                     |   1 +
>  drivers/net/liteeth.c                    | 376 +++++++++++++++++++++++
>  drivers/serial/Makefile                  |   1 +
>  drivers/serial/serial_litex.c            |  96 ++++++
>  drivers/spi/Kconfig                      |   3 +
>  drivers/spi/Makefile                     |   1 +
>  drivers/spi/litex_spiflash.c             | 241 +++++++++++++++
>  images/Makefile.riscv                    |   4 +
>  26 files changed, 1318 insertions(+), 16 deletions(-)
>  create mode 100644 arch/riscv/boards/litex-linux/Makefile
>  create mode 100644 arch/riscv/boards/litex-linux/lowlevel.c
>  create mode 100644 arch/riscv/configs/litex_linux_defconfig
>  create mode 100644 arch/riscv/dts/litex-linux.dts
>  create mode 100644 arch/riscv/dts/litex_soc_linux.dtsi
>  create mode 100644 arch/riscv/include/asm/debug_ll_litex.h
>  create mode 100644 drivers/gpio/gpio-74xx-mmio.c
>  create mode 100644 drivers/net/liteeth.c
>  create mode 100644 drivers/serial/serial_litex.c
>  create mode 100644 drivers/spi/litex_spiflash.c
> 
> -- 
> 2.32.0
> 


-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


      parent reply	other threads:[~2021-08-17 10:12 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17 10:04 Antony Pavlov
2021-08-17 10:04 ` [PATCH 1/8] clocksource: timer-riscv: select CSR from device tree Antony Pavlov
2021-08-17 10:04 ` [PATCH 2/8] serial: add litex UART driver Antony Pavlov
2021-08-17 10:04 ` [PATCH 3/8] console: support set baudrate for fixed baudrate drivers Antony Pavlov
2021-08-17 10:04 ` [PATCH 4/8] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-08-17 10:04 ` [PATCH 5/8] spi: add litex spiflash driver Antony Pavlov
2021-08-17 10:04 ` [PATCH 6/8] net: add LiteEth driver Antony Pavlov
2021-08-17 10:04 ` [PATCH 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support Antony Pavlov
2021-08-17 10:04 ` [PATCH 8/8] RISC-V: add litex_linux_defconfig Antony Pavlov
2021-08-17 10:10 ` Antony Pavlov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817131021.674041b1630520e20dbe6995@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox