mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources
@ 2021-09-13 12:13 Michael Riesch
  2021-09-13 12:13 ` [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board Michael Riesch
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Michael Riesch @ 2021-09-13 12:13 UTC (permalink / raw)
  To: barebox; +Cc: Michael Riesch

Hi all,

This series features some mixed additions to and improvements of
the Xilinx Zynq UltraScale+ MPSoC support in barebox.

The first patch introduces support for the Xilinx Zynq UltraScale+
MPSoC ZCU106 evaluation board (based on the board support for the
ZCU104). Tested the basic features (SD card, Ethernet, ...) on a
ZCU106 board (well, obviously...).

The second patch fixes two links in the Zynq UltraScale+ part
of the documentation.

Finally, the third patch introduces support for the boot source
detection on the Zynq UltraScale+ architecture in general. Tested
on the ZCU106 and a custom Zynq UltraScale+ board.

Version 2 of this patch considers the reviews by Michael Tretter
and Ahmad Fatoum. Now boot source and instance are set in the
zynqmp_init method and the boot source/instance determination has
been revised for better readability.

Best regards,
Michael

Michael Riesch (3):
  arm: zynqmp: add support for xilinx zcu106 board
  Documentation: boards: zynqmp: fix broken links
  arm: zynqmp: add boot source support

 Documentation/boards/zynqmp.rst               |  4 +-
 arch/arm/boards/Makefile                      |  1 +
 arch/arm/boards/xilinx-zcu106/Makefile        |  3 +
 arch/arm/boards/xilinx-zcu106/board.c         | 21 +++++
 arch/arm/boards/xilinx-zcu106/lowlevel.c      | 24 ++++++
 arch/arm/boards/xilinx-zcu106/lowlevel_init.S | 12 +++
 arch/arm/dts/Makefile                         |  1 +
 arch/arm/dts/zynqmp-zcu106-revA.dts           | 21 +++++
 arch/arm/mach-zynqmp/Kconfig                  |  6 ++
 arch/arm/mach-zynqmp/zynqmp.c                 | 86 +++++++++++++++++++
 images/Makefile.zynqmp                        |  4 +
 11 files changed, 181 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boards/xilinx-zcu106/Makefile
 create mode 100644 arch/arm/boards/xilinx-zcu106/board.c
 create mode 100644 arch/arm/boards/xilinx-zcu106/lowlevel.c
 create mode 100644 arch/arm/boards/xilinx-zcu106/lowlevel_init.S
 create mode 100644 arch/arm/dts/zynqmp-zcu106-revA.dts

-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board
  2021-09-13 12:13 [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Michael Riesch
@ 2021-09-13 12:13 ` Michael Riesch
  2021-09-13 12:13 ` [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links Michael Riesch
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Michael Riesch @ 2021-09-13 12:13 UTC (permalink / raw)
  To: barebox; +Cc: Michael Riesch

Add support for the Xilinx Zynq UltraScale+ MPSoC ZCU106 evaluation
board.

The changes are derived from the ZCU104 board support by applying
s/104/106/g (more or less).

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 arch/arm/boards/Makefile                      |  1 +
 arch/arm/boards/xilinx-zcu106/Makefile        |  3 +++
 arch/arm/boards/xilinx-zcu106/board.c         | 21 ++++++++++++++++
 arch/arm/boards/xilinx-zcu106/lowlevel.c      | 24 +++++++++++++++++++
 arch/arm/boards/xilinx-zcu106/lowlevel_init.S | 12 ++++++++++
 arch/arm/dts/Makefile                         |  1 +
 arch/arm/dts/zynqmp-zcu106-revA.dts           | 21 ++++++++++++++++
 arch/arm/mach-zynqmp/Kconfig                  |  6 +++++
 images/Makefile.zynqmp                        |  4 ++++
 9 files changed, 93 insertions(+)
 create mode 100644 arch/arm/boards/xilinx-zcu106/Makefile
 create mode 100644 arch/arm/boards/xilinx-zcu106/board.c
 create mode 100644 arch/arm/boards/xilinx-zcu106/lowlevel.c
 create mode 100644 arch/arm/boards/xilinx-zcu106/lowlevel_init.S
 create mode 100644 arch/arm/dts/zynqmp-zcu106-revA.dts

diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 5aac64fce..22dc9fe3d 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -170,6 +170,7 @@ obj-$(CONFIG_MACH_WARP7)			+= element14-warp7/
 obj-$(CONFIG_MACH_WEBASTO_CCBV2)		+= webasto-ccbv2/
 obj-$(CONFIG_MACH_VF610_TWR)			+= freescale-vf610-twr/
 obj-$(CONFIG_MACH_XILINX_ZCU104)		+= xilinx-zcu104/
+obj-$(CONFIG_MACH_XILINX_ZCU106)		+= xilinx-zcu106/
 obj-$(CONFIG_MACH_ZII_COMMON)			+= zii-common/
 obj-$(CONFIG_MACH_ZII_RDU1)			+= zii-imx51-rdu1/
 obj-$(CONFIG_MACH_ZII_RDU2)			+= zii-imx6q-rdu2/
diff --git a/arch/arm/boards/xilinx-zcu106/Makefile b/arch/arm/boards/xilinx-zcu106/Makefile
new file mode 100644
index 000000000..297f77d57
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu106/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+obj-y += board.o
+lwl-y += lowlevel.o lowlevel_init.o
diff --git a/arch/arm/boards/xilinx-zcu106/board.c b/arch/arm/boards/xilinx-zcu106/board.c
new file mode 100644
index 000000000..0cb5ce86e
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu106/board.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021, WolfVision GmbH
+ * Author: Michael Riesch <michael.riesch@wolfvision.net>
+ *
+ * Based on the barebox ZCU104 board support code.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/zynqmp-bbu.h>
+
+static int zcu106_register_update_handler(void)
+{
+	if (!of_machine_is_compatible("xlnx,zynqmp-zcu106"))
+		return 0;
+
+	return zynqmp_bbu_register_handler("SD", "/boot/BOOT.BIN",
+					   BBU_HANDLER_FLAG_DEFAULT);
+}
+device_initcall(zcu106_register_update_handler);
diff --git a/arch/arm/boards/xilinx-zcu106/lowlevel.c b/arch/arm/boards/xilinx-zcu106/lowlevel.c
new file mode 100644
index 000000000..ccc8d6141
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu106/lowlevel.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021, WolfVision GmbH
+ * Author: Michael Riesch <michael.riesch@wolfvision.net>
+ *
+ * Based on the barebox ZCU104 board support code.
+ */
+
+#include <common.h>
+#include <debug_ll.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_zynqmp_zcu106_revA_start[];
+
+void zynqmp_zcu106_start(uint32_t, uint32_t, uint32_t);
+
+void noinline zynqmp_zcu106_start(uint32_t r0, uint32_t r1, uint32_t r2)
+{
+	/* Assume that the first stage boot loader configured the UART */
+	putc_ll('>');
+
+	barebox_arm_entry(0, SZ_2G,
+			  __dtb_zynqmp_zcu106_revA_start + global_variable_offset());
+}
diff --git a/arch/arm/boards/xilinx-zcu106/lowlevel_init.S b/arch/arm/boards/xilinx-zcu106/lowlevel_init.S
new file mode 100644
index 000000000..f3d55dcef
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu106/lowlevel_init.S
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#include <linux/linkage.h>
+#include <asm/barebox-arm64.h>
+
+/* The DRAM is already setup */
+#define STACK_TOP 0x80000000
+
+ENTRY_PROC(start_zynqmp_zcu106)
+	mov x0, #STACK_TOP
+	mov sp, x0
+	b zynqmp_zcu106_start
+ENTRY_PROC_END(start_zynqmp_zcu106)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ffa9fe88c..14ca6c38e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -170,6 +170,7 @@ lwl-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
 lwl-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
 lwl-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
 lwl-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
+lwl-$(CONFIG_MACH_XILINX_ZCU106) += zynqmp-zcu106-revA.dtb.o
 
 lwl-$(CONFIG_MACH_ZII_IMX7D_DEV) += imx7d-zii-rpu2.dtb.o imx7d-zii-rmu2.dtb.o
 lwl-$(CONFIG_MACH_WAGO_PFC_AM35XX) += am35xx-pfc-750_820x.dtb.o
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
new file mode 100644
index 000000000..7c5058826
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU106
+ *
+ * Copyright (C) 2021, WolfVision GmbH
+ * Author: Michael Riesch <michael.riesch@wolfvision.net>
+ *
+ * Based on the dts for the Xilinx ZynqMP ZCU104.
+ */
+
+#include <arm64/xilinx/zynqmp-zcu106-revA.dts>
+
+/ {
+	chosen {
+		environment {
+			compatible = "barebox,environment";
+			device-path = &sdhci1, "partname:0";
+			file-path = "barebox.env";
+		};
+	};
+};
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
index c9dc71c9e..78cb90165 100644
--- a/arch/arm/mach-zynqmp/Kconfig
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -7,4 +7,10 @@ config MACH_XILINX_ZCU104
 	  Say Y here if you are using the Xilinx Zynq UltraScale+ MPSoC ZCU104
 	  evaluation board.
 
+config MACH_XILINX_ZCU106
+	bool "Xilinx Zynq UltraScale+ MPSoC ZCU106"
+	help
+	  Say Y here if you are using the Xilinx Zynq UltraScale+ MPSoC ZCU106
+	  evaluation board.
+
 endif
diff --git a/images/Makefile.zynqmp b/images/Makefile.zynqmp
index da3e90b84..872f39988 100644
--- a/images/Makefile.zynqmp
+++ b/images/Makefile.zynqmp
@@ -6,3 +6,7 @@
 pblb-$(CONFIG_MACH_XILINX_ZCU104) += start_zynqmp_zcu104
 FILE_barebox-zynqmp-zcu104.img = start_zynqmp_zcu104.pblb
 image-$(CONFIG_MACH_XILINX_ZCU104) += barebox-zynqmp-zcu104.img
+
+pblb-$(CONFIG_MACH_XILINX_ZCU106) += start_zynqmp_zcu106
+FILE_barebox-zynqmp-zcu106.img = start_zynqmp_zcu106.pblb
+image-$(CONFIG_MACH_XILINX_ZCU106) += barebox-zynqmp-zcu106.img
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links
  2021-09-13 12:13 [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Michael Riesch
  2021-09-13 12:13 ` [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board Michael Riesch
@ 2021-09-13 12:13 ` Michael Riesch
  2021-09-13 12:13 ` [PATCH v2 3/3] arm: zynqmp: add boot source support Michael Riesch
  2021-10-04  9:59 ` [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Sascha Hauer
  3 siblings, 0 replies; 5+ messages in thread
From: Michael Riesch @ 2021-09-13 12:13 UTC (permalink / raw)
  To: barebox; +Cc: Michael Riesch

The external links are not properly recognized. Remove quotation marks
as a fix.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 Documentation/boards/zynqmp.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/zynqmp.rst b/Documentation/boards/zynqmp.rst
index 05d41c401..98fcac017 100644
--- a/Documentation/boards/zynqmp.rst
+++ b/Documentation/boards/zynqmp.rst
@@ -30,8 +30,8 @@ instructions for these tools how to prepare the BOOT.BIN image.
 Create a FAT partition as the first partition of the SD card and copy the
 produced BOOT.BIN into this partition.
 
-.. _FSBL: `https://github.com/Xilinx/embeddedsw/`
-.. _bootgen: `https://github.com/Xilinx/bootgen`
+.. _FSBL: https://github.com/Xilinx/embeddedsw/
+.. _bootgen: https://github.com/Xilinx/bootgen
 
 Booting Barebox
 ---------------
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 3/3] arm: zynqmp: add boot source support
  2021-09-13 12:13 [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Michael Riesch
  2021-09-13 12:13 ` [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board Michael Riesch
  2021-09-13 12:13 ` [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links Michael Riesch
@ 2021-09-13 12:13 ` Michael Riesch
  2021-10-04  9:59 ` [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Sascha Hauer
  3 siblings, 0 replies; 5+ messages in thread
From: Michael Riesch @ 2021-09-13 12:13 UTC (permalink / raw)
  To: barebox; +Cc: Michael Riesch

The ZynqMP reports the mode pins sampled at POR via the register
ZYNQMP_CRL_APB_BOOT_MODE_USER. This commit adds a function that reads
the register and populates the boot source.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
v2:
- moved bootsource_set(_instance) calls to zynqmp_init
- revised boot source/instance determination for better readability

 arch/arm/mach-zynqmp/zynqmp.c | 86 +++++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
index 5871c145b..610d4bba6 100644
--- a/arch/arm/mach-zynqmp/zynqmp.c
+++ b/arch/arm/mach-zynqmp/zynqmp.c
@@ -6,11 +6,36 @@
 #include <common.h>
 #include <init.h>
 #include <linux/types.h>
+#include <bootsource.h>
 #include <reset_source.h>
 
 #define ZYNQMP_CRL_APB_BASE		0xff5e0000
+#define ZYNQMP_CRL_APB_BOOT_MODE_USER	(ZYNQMP_CRL_APB_BASE + 0x200)
 #define ZYNQMP_CRL_APB_RESET_REASON	(ZYNQMP_CRL_APB_BASE + 0x220)
 
+/* PSJTAG interface, PS dedicated pins. */
+#define ZYNQMP_CRL_APB_BOOT_MODE_PSJTAG        0x0
+/* SPI 24-bit addressing */
+#define ZYNQMP_CRL_APB_BOOT_MODE_QSPI24        0x1
+/* SPI 32-bit addressing */
+#define ZYNQMP_CRL_APB_BOOT_MODE_QSPI32        0x2
+/* SD 2.0 card @ controller 0 */
+#define ZYNQMP_CRL_APB_BOOT_MODE_SD0           0x3
+/* SPI NAND flash */
+#define ZYNQMP_CRL_APB_BOOT_MODE_NAND          0x4
+/* SD 2.0 card @ controller 1 */
+#define ZYNQMP_CRL_APB_BOOT_MODE_SD1           0x5
+/* eMMC @ controller 1 */
+#define ZYNQMP_CRL_APB_BOOT_MODE_EMMC          0x6
+/* USB 2.0 */
+#define ZYNQMP_CRL_APB_BOOT_MODE_USB           0x7
+/* PJTAG connection 0 option. */
+#define ZYNQMP_CRL_APB_BOOT_MODE_PJTAG0        0x8
+/* PJTAG connection 1 option. */
+#define ZYNQMP_CRL_APB_BOOT_MODE_PJTAG1        0x9
+/* SD 3.0 card (level-shifted) @ controller 1 */
+#define ZYNQMP_CRL_APB_BOOT_MODE_SD1LS         0xE
+
 /* External POR: The PS_POR_B reset signal pin was asserted. */
 #define ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL   BIT(0)
 /* Internal POR: A system error triggered a POR reset. */
@@ -26,6 +51,60 @@
 /* Software debugger reset: Write to BLOCKONLY_RST [debug_only]. */
 #define ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS  BIT(6)
 
+static void zynqmp_get_bootsource(enum bootsource *src, int *instance)
+{
+	u32 v;
+
+	if (!src || !instance)
+		return;
+
+	v = readl(ZYNQMP_CRL_APB_BOOT_MODE_USER);
+	v &= 0x0F;
+
+	/* cf. Table 11-1 "Boot Modes" in UG1085 Zynq UltraScale+ Device TRM */
+	switch (v) {
+	case ZYNQMP_CRL_APB_BOOT_MODE_PSJTAG:
+	case ZYNQMP_CRL_APB_BOOT_MODE_PJTAG0:
+	case ZYNQMP_CRL_APB_BOOT_MODE_PJTAG1:
+		*src = BOOTSOURCE_JTAG;
+		*instance = 0;
+		break;
+
+	case ZYNQMP_CRL_APB_BOOT_MODE_QSPI24:
+	case ZYNQMP_CRL_APB_BOOT_MODE_QSPI32:
+		*src = BOOTSOURCE_SPI;
+		*instance = 0;
+		break;
+
+	case ZYNQMP_CRL_APB_BOOT_MODE_SD0:
+		*src = BOOTSOURCE_MMC;
+		*instance = 0;
+		break;
+
+	case ZYNQMP_CRL_APB_BOOT_MODE_NAND:
+		*src = BOOTSOURCE_SPI_NAND;
+		*instance = 0;
+		break;
+
+	case ZYNQMP_CRL_APB_BOOT_MODE_SD1:
+	case ZYNQMP_CRL_APB_BOOT_MODE_EMMC:
+	case ZYNQMP_CRL_APB_BOOT_MODE_SD1LS:
+		*src = BOOTSOURCE_MMC;
+		*instance = 1;
+		break;
+
+	case ZYNQMP_CRL_APB_BOOT_MODE_USB:
+		*src = BOOTSOURCE_USB;
+		*instance = 0;
+		break;
+
+	default:
+		*src = BOOTSOURCE_UNKNOWN;
+		*instance = BOOTSOURCE_INSTANCE_UNKNOWN;
+		break;
+	}
+}
+
 struct zynqmp_reset_reason {
 	u32 mask;
 	enum reset_src_type type;
@@ -65,6 +144,13 @@ static enum reset_src_type zynqmp_get_reset_src(void)
 
 static int zynqmp_init(void)
 {
+	enum bootsource boot_src;
+	int boot_instance;
+
+	zynqmp_get_bootsource(&boot_src, &boot_instance);
+	bootsource_set(boot_src);
+	bootsource_set_instance(boot_instance);
+
 	reset_source_set(zynqmp_get_reset_src());
 
 	return 0;
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources
  2021-09-13 12:13 [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Michael Riesch
                   ` (2 preceding siblings ...)
  2021-09-13 12:13 ` [PATCH v2 3/3] arm: zynqmp: add boot source support Michael Riesch
@ 2021-10-04  9:59 ` Sascha Hauer
  3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2021-10-04  9:59 UTC (permalink / raw)
  To: Michael Riesch; +Cc: barebox

On Mon, Sep 13, 2021 at 02:13:47PM +0200, Michael Riesch wrote:
> Hi all,
> 
> This series features some mixed additions to and improvements of
> the Xilinx Zynq UltraScale+ MPSoC support in barebox.
> 
> The first patch introduces support for the Xilinx Zynq UltraScale+
> MPSoC ZCU106 evaluation board (based on the board support for the
> ZCU104). Tested the basic features (SD card, Ethernet, ...) on a
> ZCU106 board (well, obviously...).
> 
> The second patch fixes two links in the Zynq UltraScale+ part
> of the documentation.
> 
> Finally, the third patch introduces support for the boot source
> detection on the Zynq UltraScale+ architecture in general. Tested
> on the ZCU106 and a custom Zynq UltraScale+ board.
> 
> Version 2 of this patch considers the reviews by Michael Tretter
> and Ahmad Fatoum. Now boot source and instance are set in the
> zynqmp_init method and the boot source/instance determination has
> been revised for better readability.
> 
> Best regards,
> Michael
> 
> Michael Riesch (3):
>   arm: zynqmp: add support for xilinx zcu106 board
>   Documentation: boards: zynqmp: fix broken links
>   arm: zynqmp: add boot source support

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-10-04 10:00 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-13 12:13 [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Michael Riesch
2021-09-13 12:13 ` [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board Michael Riesch
2021-09-13 12:13 ` [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links Michael Riesch
2021-09-13 12:13 ` [PATCH v2 3/3] arm: zynqmp: add boot source support Michael Riesch
2021-10-04  9:59 ` [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources Sascha Hauer

mail archive of the barebox mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lore.barebox.org/barebox/0 barebox/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 barebox barebox/ https://lore.barebox.org/barebox \
		barebox@lists.infradead.org
	public-inbox-index barebox

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git