mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation
@ 2022-05-13 14:16 Lucas Stach
  2022-05-16  8:10 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Lucas Stach @ 2022-05-13 14:16 UTC (permalink / raw)
  To: barebox

The DDRC only uses the DEVICE_CONFIG field for memory types other than
LPDDR4. While LPDDR4 always has a bus width of x32, the script aid
generates the value for a x16 bus, as this was apparently used for the
controller validation. This resulted in the calculated DRAM size to be
halved on boards with LPDDR4 memory.

Fixes: d8d5778ee8c2 ("ARM: imx: Correct mem size calculation for 4/8/16/32 bit bus width")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/mach-imx/esdctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/esdctl.c b/arch/arm/mach-imx/esdctl.c
index d3dbfff423da..4c8765c193d0 100644
--- a/arch/arm/mach-imx/esdctl.c
+++ b/arch/arm/mach-imx/esdctl.c
@@ -392,7 +392,7 @@ imx_ddrc_sdram_size(void __iomem *ddrc, const u32 addrmap[],
 	}
 
 	/* Bus width in bytes, 0 means half byte or 4-bit mode */
-	if (is_imx8)
+	if (is_imx8 && !(mstr & DDRC_MSTR_LPDDR4))
 		width = (1 << FIELD_GET(DDRC_MSTR_DEVICE_CONFIG, mstr)) >> 1;
 	else
 		width = 4;
-- 
2.35.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation
  2022-05-13 14:16 [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation Lucas Stach
@ 2022-05-16  8:10 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2022-05-16  8:10 UTC (permalink / raw)
  To: Lucas Stach; +Cc: barebox

On Fri, May 13, 2022 at 04:16:25PM +0200, Lucas Stach wrote:
> The DDRC only uses the DEVICE_CONFIG field for memory types other than
> LPDDR4. While LPDDR4 always has a bus width of x32, the script aid
> generates the value for a x16 bus, as this was apparently used for the
> controller validation. This resulted in the calculated DRAM size to be
> halved on boards with LPDDR4 memory.
> 
> Fixes: d8d5778ee8c2 ("ARM: imx: Correct mem size calculation for 4/8/16/32 bit bus width")
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  arch/arm/mach-imx/esdctl.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/mach-imx/esdctl.c b/arch/arm/mach-imx/esdctl.c
> index d3dbfff423da..4c8765c193d0 100644
> --- a/arch/arm/mach-imx/esdctl.c
> +++ b/arch/arm/mach-imx/esdctl.c
> @@ -392,7 +392,7 @@ imx_ddrc_sdram_size(void __iomem *ddrc, const u32 addrmap[],
>  	}
>  
>  	/* Bus width in bytes, 0 means half byte or 4-bit mode */
> -	if (is_imx8)
> +	if (is_imx8 && !(mstr & DDRC_MSTR_LPDDR4))
>  		width = (1 << FIELD_GET(DDRC_MSTR_DEVICE_CONFIG, mstr)) >> 1;
>  	else
>  		width = 4;
> -- 
> 2.35.3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-05-16  8:11 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-13 14:16 [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation Lucas Stach
2022-05-16  8:10 ` Sascha Hauer

mail archive of the barebox mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lore.barebox.org/barebox/0 barebox/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 barebox barebox/ https://lore.barebox.org/barebox \
		barebox@lists.infradead.org barebox@lists.infradead.org
	public-inbox-index barebox

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git