* [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile
@ 2022-10-13 9:03 Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 1/3] include: asm-generic: reloc: implement get_unrelocated() Ahmad Fatoum
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Ahmad Fatoum @ 2022-10-13 9:03 UTC (permalink / raw)
To: barebox
TL;DR: GCC can prove that variables aren't supposed to overlap and as
such it generated code than readded get_runtime_offset() on top of an
already relocated linker-defined variable's address.
See PATCH 2/3 for a disassembly of the affected code. Board code can
be similarly micompiled, but that's a fix for another day.
I am not so sure about the name of the new macro. I chose
get_unrelocated for similarity with get_unaligned, but it doesn't
dereference the argument, just get its address. Looking at it that way,
it's just a UB-infested way to say & (address-of). Perhaps just
call it runtime_address()? After all, it works before and after
relocation. We can change that later though, once I get around
to patch board entry points.
Ahmad Fatoum (3):
include: asm-generic: reloc: implement get_unrelocated()
ARM: cpu: add compiler barrier around unrelocated access
RISC-V: add compiler barriers around unrelocated accesses
arch/arm/cpu/common.c | 11 +++--
arch/arm/cpu/uncompress.c | 4 +-
arch/riscv/boot/uncompress.c | 4 +-
arch/riscv/include/asm/sections.h | 2 +-
arch/riscv/lib/reloc.c | 6 +--
include/asm-generic/reloc.h | 68 +++++++++++++++++++++++++++++++
6 files changed, 81 insertions(+), 14 deletions(-)
--
2.30.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH master 1/3] include: asm-generic: reloc: implement get_unrelocated()
2022-10-13 9:03 [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Ahmad Fatoum
@ 2022-10-13 9:03 ` Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 2/3] ARM: cpu: add compiler barrier around unrelocated access Ahmad Fatoum
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Ahmad Fatoum @ 2022-10-13 9:03 UTC (permalink / raw)
To: barebox; +Cc: Ahmad Fatoum
This introduces get_unrelocated(__linker_defined_symbol) as an
alternative to error-prone __linker_defined_symbol +
get_runtime_offset()/global_variable_offset().
While most code is better served by doing a
relocate_to_current_adr(); setup_c();
and jumping to a noinline function for anything remotely complicated,
we can't do that always:
- In relocation code, PBL uncompressing preparatory code, we _must_
access linker defined symbols before relocation unless we
reimplement them in assembly.
- I believe GCC doesn't guarantee that an external object referenced
in a noinline function has its address computed in the same
function. Compiler may see occasion to pc-relative read e.g. two
addresses located after function return into registers, believing
that relocation must have happened before C code first runs.
We then do the relocation, but the addresses are never touched
again, so we dereference an unrelocated address later on.
For these situation we introduce a new get_unrelocated() macro that
hides behind assembly the origin of the address it returns and so the
compiler can not assume that it may move it around across calls to
functions like relocate_to_current_adr() or the relocation loop in
relocate_to_current_adr() itself.
This has one major shortcoming that exists with the opencoded
addition as well: Compiler will generate PC-relative access to data
defined in the same translation unit, so we end up adding the offset
twice. We employ some GCC builtin magic to catch most of this at
compile-time. If we just did RELOC_HIDE() with a cast, we may lull
board code authors into false security when they use it for non
linker defined symbols.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
include/asm-generic/reloc.h | 68 +++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/include/asm-generic/reloc.h b/include/asm-generic/reloc.h
index 90459371ebe8..64532176ea61 100644
--- a/include/asm-generic/reloc.h
+++ b/include/asm-generic/reloc.h
@@ -3,8 +3,76 @@
#ifndef _ASM_GENERIC_RELOC_H_
#define _ASM_GENERIC_RELOC_H_
+#include <linux/compiler.h>
+
#ifndef global_variable_offset
#define global_variable_offset() get_runtime_offset()
#endif
+/*
+ * Using sizeof() on incomplete types always fails, so we use GCC's
+ * __builtin_object_size() instead. This is the mechanism underlying
+ * FORTIFY_SOURCE. &symbol should always be something GCC can compute
+ * a size for, even without annotations, unless it's incomplete.
+ * The second argument ensures we get 0 for failure.
+ */
+#define __has_type_complete(sym) __builtin_object_size(&(sym), 2)
+
+#define __has_type_byte_array(sym) (sizeof(*sym) == 1 + __must_be_array(sym))
+
+/*
+ * get_unrelocated defined below is supposed to be used exclusively
+ * with linker defined symbols, e.g. unsigned char input_end[].
+ *
+ * We can't completely ensure that, but this gets us close enough
+ * to avoid most abuse of get_unrelocated.
+ */
+#define __is_incomplete_byte_array(sym) \
+ (!__has_type_complete(sym) && __has_type_byte_array(sym))
+
+/*
+ * While accessing global variables before C environment is setup is
+ * questionable, we can't avoid it when we decide to write our
+ * relocation routines in C. This invites a tricky problem with
+ * this naive code:
+ *
+ * var = &variable + global_variable_offset(); relocate_to_current_adr();
+ *
+ * Compiler is within rights to rematerialize &variable after
+ * relocate_to_current_adr(), which is unfortunate because we
+ * then end up adding a relocated &variable with the relocation
+ * offset once more. We avoid this here by hiding address with
+ * RELOC_HIDE. This is required as a simple compiler barrier()
+ * with "memory" clobber is not immune to compiler proving that
+ * &sym fits in a register and as such is unaffected by the memory
+ * clobber. barrier_data(&sym) would work too, but that comes with
+ * aforementioned compiler "memory" barrier, that we don't care for.
+ *
+ * We don't necessarily need the volatile variable assignment when
+ * using the compiler-gcc.h RELOC_HIDE implementation as __asm__
+ * __volatile__ takes care of it, but the generic RELOC_HIDE
+ * implementation has GCC misscompile get_unrelocated when not passing
+ * in a volatile object. Volatile casts instead of variable assignments
+ * also led to miscompilations with GCC v11.1.1 for THUMB2.
+ */
+
+#define get_unrelocated(sym) ({ \
+ void *volatile __addrof_sym = (sym); \
+ if (!__is_incomplete_byte_array(sym)) \
+ __unsafe_get_unrelocated(); \
+ RELOC_HIDE(__addrof_sym, global_variable_offset()); \
+})
+
+/*
+ * Above will fail for "near" objects, e.g. data in the same
+ * translation unit or with LTO, as the compiler can be smart
+ * enough to omit relocation entry and just generate PC relative
+ * accesses leading to base address being added twice. We try to
+ * catch most of these here by triggering an error when get_unrelocated
+ * is used with anything that is not a byte array of unknown size.
+ */
+extern void *__compiletime_error(
+ "get_unrelocated() may only be called on linker defined symbols."
+) __unsafe_get_unrelocated(void);
+
#endif
--
2.30.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH master 2/3] ARM: cpu: add compiler barrier around unrelocated access
2022-10-13 9:03 [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 1/3] include: asm-generic: reloc: implement get_unrelocated() Ahmad Fatoum
@ 2022-10-13 9:03 ` Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 3/3] RISC-V: add compiler barriers around unrelocated accesses Ahmad Fatoum
2022-10-13 11:52 ` [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Marco Felsch
3 siblings, 0 replies; 7+ messages in thread
From: Ahmad Fatoum @ 2022-10-13 9:03 UTC (permalink / raw)
To: barebox; +Cc: Ahmad Fatoum
GCC v11.1.1 was observed miscompiling relocate_to_current_adr() while
generating THUMB2 code:
dynsym = (void *)__dynsym_start + offset_var;
178c: 4b48 ldr r3, [pc, #288] ; (18b0 <relocate_to_current_adr+0x13c>)
178e: 5869 ldr r1, [r5, r1]
dend = (void *)__rel_dyn_end + offset_var;
1790: 4407 add r7, r0
dynsym = (void *)__dynsym_start + offset_var;
1792: 58e8 ldr r0, [r5, r3]
1794: f102 0308 add.w r3, r2, #8
1798: 440b add r3, r1
179a: 4410 add r0, r2
dynend = (void *)__dynsym_end + offset_var;
while (dstart < dend) {
179c: f1a3 0608 sub.w r6, r3, #8
17a0: 42b7 cmp r7, r6
17a2: d80a bhi.n 17ba <relocate_to_current_adr+0x46>
dynend = (void *)__dynsym_end + offset_var;
17a4: 4b43 ldr r3, [pc, #268] ; (18b4 <relocate_to_current_adr+0x140>)
}
dstart += sizeof(*rel);
}
__memset(dynsym, 0, (unsigned long)dynend - (unsigned long)dynsym);
17a6: 2100 movs r1, #0
dynend = (void *)__dynsym_end + offset_var;
17a8: 58eb ldr r3, [r5, r3]
17aa: 441a add r2, r3
__memset(dynsym, 0, (unsigned long)dynend - (unsigned long)dynsym);
17ac: 1a12 subs r2, r2, r0
17ae: f000 fda5 bl 22fc <__memset>
Both &__dynsym_start and &__dynsym_end will change value after relocation,
so we absolutely want address calculation and addition of offset_var to
happen before relocation. Compiler is within rights though to assume
variables to be already relocated though and thus proves that &__dynsym_end
may not change in the loop and thus move dynend calculation below the
relocation loop and thus we end up with dynend being incremented by
offset_var once more. The resulting out-of-bounds memset() will overwrite
parts of barebox and break its startup.
The naive solution of moving dynsym/dynend calculation beyond the
relocation loop is insufficient as the compiler may decide to move
it back. Instead the only solution short of rewriting this all in
assembly seems to be hiding the origin of dynsym's value, so the
optimizer may not prove the assumption that relocation would not affect
its value. This is done using get_unrelocated, which was introduced in
a previous commit. With this, the __memset call now uses precomputed
values as expected: no last minute ldr, everything tidily placed into
registers prior to the relocation loop:
17be: 2100 movs r1, #0
17c0: 1b52 subs r2, r2, r5
17c2: 4628 mov r0, r5
17c4: f000 fdaa bl 231c <__memset>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/cpu/common.c | 11 +++++------
arch/arm/cpu/uncompress.c | 4 ++--
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm/cpu/common.c b/arch/arm/cpu/common.c
index 7cd97e938b3d..ed579ab94ed4 100644
--- a/arch/arm/cpu/common.c
+++ b/arch/arm/cpu/common.c
@@ -61,16 +61,15 @@ void pbl_barebox_break(void)
*/
void relocate_to_current_adr(void)
{
- unsigned long offset, offset_var;
+ unsigned long offset;
unsigned long __maybe_unused *dynsym, *dynend;
void *dstart, *dend;
/* Get offset between linked address and runtime address */
offset = get_runtime_offset();
- offset_var = global_variable_offset();
- dstart = (void *)__rel_dyn_start + offset_var;
- dend = (void *)__rel_dyn_end + offset_var;
+ dstart = get_unrelocated(__rel_dyn_start);
+ dend = get_unrelocated(__rel_dyn_end);
#if defined(CONFIG_CPU_64)
while (dstart < dend) {
@@ -96,8 +95,8 @@ void relocate_to_current_adr(void)
dstart += sizeof(*rel);
}
#elif defined(CONFIG_CPU_32)
- dynsym = (void *)__dynsym_start + offset_var;
- dynend = (void *)__dynsym_end + offset_var;
+ dynsym = get_unrelocated(__dynsym_start);
+ dynend = get_unrelocated(__dynsym_end);
while (dstart < dend) {
struct elf32_rel *rel = dstart;
diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
index 537ee63229d7..929a3a22c29b 100644
--- a/arch/arm/cpu/uncompress.c
+++ b/arch/arm/cpu/uncompress.c
@@ -53,8 +53,8 @@ void __noreturn barebox_pbl_start(unsigned long membase, unsigned long memsize,
unsigned long pc = get_pc();
/* piggy data is not relocated, so determine the bounds now */
- pg_start = input_data + global_variable_offset();
- pg_end = input_data_end + global_variable_offset();
+ pg_start = get_unrelocated(input_data);
+ pg_end = get_unrelocated(input_data_end);
if (IS_ENABLED(CONFIG_PBL_RELOCATABLE)) {
/*
--
2.30.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH master 3/3] RISC-V: add compiler barriers around unrelocated accesses
2022-10-13 9:03 [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 1/3] include: asm-generic: reloc: implement get_unrelocated() Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 2/3] ARM: cpu: add compiler barrier around unrelocated access Ahmad Fatoum
@ 2022-10-13 9:03 ` Ahmad Fatoum
2022-10-13 10:36 ` Ahmad Fatoum
2022-10-13 11:52 ` [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Marco Felsch
3 siblings, 1 reply; 7+ messages in thread
From: Ahmad Fatoum @ 2022-10-13 9:03 UTC (permalink / raw)
To: barebox; +Cc: Ahmad Fatoum
We observed on ARM miscompilation because get_runtime_offset() was
cached before relocation, while address computation of symbol happened
after, effectively adding the base address twice to the symbol offset.
New get_unrelocated() hides origin of the symbol going into the address
calculation and thereby thwarts this optimization. Employ it in RISC-V
code as well to avoid such issues as experienced on ARM.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/riscv/boot/uncompress.c | 4 ++--
arch/riscv/include/asm/sections.h | 2 +-
arch/riscv/lib/reloc.c | 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/riscv/boot/uncompress.c b/arch/riscv/boot/uncompress.c
index ee24f81e0159..eab51c8d52bc 100644
--- a/arch/riscv/boot/uncompress.c
+++ b/arch/riscv/boot/uncompress.c
@@ -36,8 +36,8 @@ void __noreturn barebox_pbl_start(unsigned long membase, unsigned long memsize,
irq_init_vector(riscv_mode());
/* piggy data is not relocated, so determine the bounds now */
- pg_start = input_data + get_runtime_offset();
- pg_end = input_data_end + get_runtime_offset();
+ pg_start = get_unrelocated(input_data);
+ pg_end = get_unrelocated(input_data_end);
pg_len = pg_end - pg_start;
uncompressed_len = input_data_len();
diff --git a/arch/riscv/include/asm/sections.h b/arch/riscv/include/asm/sections.h
index 6673648bcd58..b90f4d6d2ad5 100644
--- a/arch/riscv/include/asm/sections.h
+++ b/arch/riscv/include/asm/sections.h
@@ -19,7 +19,7 @@ unsigned long get_runtime_offset(void);
static inline unsigned int input_data_len(void)
{
- return get_unaligned((const u32 *)(input_data_end + get_runtime_offset() - 4));
+ return get_unaligned((const u32 *)get_unrelocated(input_data_end) - 1);
}
#endif
diff --git a/arch/riscv/lib/reloc.c b/arch/riscv/lib/reloc.c
index 13118a9ac54f..1dddf627d0b9 100644
--- a/arch/riscv/lib/reloc.c
+++ b/arch/riscv/lib/reloc.c
@@ -42,9 +42,9 @@ void relocate_to_current_adr(void)
if (!offset)
return;
- dstart = __rel_dyn_start + offset;
- dend = __rel_dyn_end + offset;
- dynsym = (void *)__dynsym_start + offset;
+ dstart = get_unrelocated(__rel_dyn_start);
+ dend = get_unrelocated(__rel_dyn_end);
+ dynsym = get_unrelocated(__dynsym_start) + offset;
for (rela = dstart; (void *)rela < dend; rela++) {
unsigned long *fixup;
--
2.30.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH master 3/3] RISC-V: add compiler barriers around unrelocated accesses
2022-10-13 9:03 ` [PATCH master 3/3] RISC-V: add compiler barriers around unrelocated accesses Ahmad Fatoum
@ 2022-10-13 10:36 ` Ahmad Fatoum
0 siblings, 0 replies; 7+ messages in thread
From: Ahmad Fatoum @ 2022-10-13 10:36 UTC (permalink / raw)
To: barebox
On 13.10.22 11:03, Ahmad Fatoum wrote:
> We observed on ARM miscompilation because get_runtime_offset() was
> cached before relocation, while address computation of symbol happened
> after, effectively adding the base address twice to the symbol offset.
>
> New get_unrelocated() hides origin of the symbol going into the address
> calculation and thereby thwarts this optimization. Employ it in RISC-V
> code as well to avoid such issues as experienced on ARM.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> arch/riscv/boot/uncompress.c | 4 ++--
> arch/riscv/include/asm/sections.h | 2 +-
> arch/riscv/lib/reloc.c | 6 +++---
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/riscv/boot/uncompress.c b/arch/riscv/boot/uncompress.c
> index ee24f81e0159..eab51c8d52bc 100644
> --- a/arch/riscv/boot/uncompress.c
> +++ b/arch/riscv/boot/uncompress.c
> @@ -36,8 +36,8 @@ void __noreturn barebox_pbl_start(unsigned long membase, unsigned long memsize,
> irq_init_vector(riscv_mode());
>
> /* piggy data is not relocated, so determine the bounds now */
> - pg_start = input_data + get_runtime_offset();
> - pg_end = input_data_end + get_runtime_offset();
> + pg_start = get_unrelocated(input_data);
> + pg_end = get_unrelocated(input_data_end);
> pg_len = pg_end - pg_start;
> uncompressed_len = input_data_len();
>
> diff --git a/arch/riscv/include/asm/sections.h b/arch/riscv/include/asm/sections.h
> index 6673648bcd58..b90f4d6d2ad5 100644
> --- a/arch/riscv/include/asm/sections.h
> +++ b/arch/riscv/include/asm/sections.h
> @@ -19,7 +19,7 @@ unsigned long get_runtime_offset(void);
>
> static inline unsigned int input_data_len(void)
> {
> - return get_unaligned((const u32 *)(input_data_end + get_runtime_offset() - 4));
> + return get_unaligned((const u32 *)get_unrelocated(input_data_end) - 1);
> }
>
> #endif
> diff --git a/arch/riscv/lib/reloc.c b/arch/riscv/lib/reloc.c
> index 13118a9ac54f..1dddf627d0b9 100644
> --- a/arch/riscv/lib/reloc.c
> +++ b/arch/riscv/lib/reloc.c
> @@ -42,9 +42,9 @@ void relocate_to_current_adr(void)
> if (!offset)
> return;
>
> - dstart = __rel_dyn_start + offset;
> - dend = __rel_dyn_end + offset;
> - dynsym = (void *)__dynsym_start + offset;
> + dstart = get_unrelocated(__rel_dyn_start);
> + dend = get_unrelocated(__rel_dyn_end);
> + dynsym = get_unrelocated(__dynsym_start) + offset;
Ouch, + offset shouldn't be here. Will fix for v2.
>
> for (rela = dstart; (void *)rela < dend; rela++) {
> unsigned long *fixup;
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile
2022-10-13 9:03 [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Ahmad Fatoum
` (2 preceding siblings ...)
2022-10-13 9:03 ` [PATCH master 3/3] RISC-V: add compiler barriers around unrelocated accesses Ahmad Fatoum
@ 2022-10-13 11:52 ` Marco Felsch
2022-10-13 11:53 ` Ahmad Fatoum
3 siblings, 1 reply; 7+ messages in thread
From: Marco Felsch @ 2022-10-13 11:52 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
Hi Ahmad,
On 22-10-13, Ahmad Fatoum wrote:
> TL;DR: GCC can prove that variables aren't supposed to overlap and as
> such it generated code than readded get_runtime_offset() on top of an
> already relocated linker-defined variable's address.
> See PATCH 2/3 for a disassembly of the affected code. Board code can
> be similarly micompiled, but that's a fix for another day.
I didn't received a 2/3 nor a 1/3 yet. Does it stuck somewhere?
Regards,
Marco
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile
2022-10-13 11:52 ` [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Marco Felsch
@ 2022-10-13 11:53 ` Ahmad Fatoum
0 siblings, 0 replies; 7+ messages in thread
From: Ahmad Fatoum @ 2022-10-13 11:53 UTC (permalink / raw)
To: Marco Felsch; +Cc: barebox
On 13.10.22 13:52, Marco Felsch wrote:
> Hi Ahmad,
> On 22-10-13, Ahmad Fatoum wrote:
>> TL;DR: GCC can prove that variables aren't supposed to overlap and as
>> such it generated code than readded get_runtime_offset() on top of an
>> already relocated linker-defined variable's address.
>> See PATCH 2/3 for a disassembly of the affected code. Board code can
>> be similarly micompiled, but that's a fix for another day.
>
> I didn't received a 2/3 nor a 1/3 yet. Does it stuck somewhere?
At least lore.barebox.org got it:
https://lore.barebox.org/barebox/20221013090352.562170-1-a.fatoum@pengutronix.de/T/#t
>
> Regards,
> Marco
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-10-13 11:55 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-13 9:03 [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 1/3] include: asm-generic: reloc: implement get_unrelocated() Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 2/3] ARM: cpu: add compiler barrier around unrelocated access Ahmad Fatoum
2022-10-13 9:03 ` [PATCH master 3/3] RISC-V: add compiler barriers around unrelocated accesses Ahmad Fatoum
2022-10-13 10:36 ` Ahmad Fatoum
2022-10-13 11:52 ` [PATCH master 0/3] Fix GCC 11 THUMB2 relocate_to_current_adr miscompile Marco Felsch
2022-10-13 11:53 ` Ahmad Fatoum
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox