From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
Date: Wed, 14 Dec 2022 11:58:20 +0100 [thread overview]
Message-ID: <20221214105831.844421-1-a.fatoum@pengutronix.de> (raw)
The Wifx L1 is a SAMA5D4 LoRaWAN gateway. It boots from NAND, but this
can be overridden by inserting a bootable SD-Card.
This first port only provides second-stage SD-Card support. It enables
use of UART, I2C/EEPROM, Ethernet and SD-Card. For NAND use on SAMA5D4,
an updated Linux driver was ported to barebox.
This will follow separately.
Ahmad Fatoum (11):
ARM: at91: sama5: switch to nonnaked entry functions
ARM: at91: sama5d4: add entry point helpers
ARM: at91: sama5d4: enable for DT use
net: macb: match atmel,sama5d4-gem compatible
i2c: at91: extend for SAMA5D4 support
eeprom: at24: add 24mac402/602 support
driver: always ensure probe of RAM registered with mem_platform_driver
common: deep-probe: don't build without CONFIG_OFDEVICE
pinctrl: at91: make deep-probe compatible
ARM: at91: make bootsource code generic to all SAMA5
ARM: at91: SAMA5D4: add Wifx L1 support
arch/arm/boards/Makefile | 1 +
.../boards/microchip-ksz9477-evb/lowlevel.c | 6 +-
.../arm/boards/sama5d27-giantboard/lowlevel.c | 4 +-
arch/arm/boards/sama5d27-som1/lowlevel.c | 4 +-
arch/arm/boards/sama5d3_xplained/lowlevel.c | 6 +-
arch/arm/boards/sama5d4_wifx/Makefile | 4 +
arch/arm/boards/sama5d4_wifx/board.c | 38 ++
arch/arm/boards/sama5d4_wifx/lowlevel.c | 18 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/at91-sama5d4_wifx_l1.dts | 358 ++++++++++++++++++
arch/arm/dts/sama5d4.dtsi | 9 +
arch/arm/mach-at91/Kconfig | 11 +
arch/arm/mach-at91/Makefile | 3 +-
arch/arm/mach-at91/bootm-barebox.c | 3 +-
arch/arm/mach-at91/ddramc.c | 7 +
arch/arm/mach-at91/include/mach/barebox-arm.h | 22 +-
arch/arm/mach-at91/include/mach/cpu.h | 1 -
arch/arm/mach-at91/include/mach/ddramc.h | 1 +
.../mach-at91/include/mach/sama5_bootsource.h | 5 +
arch/arm/mach-at91/sama5_bootsource.c | 36 ++
arch/arm/mach-at91/sama5d2.c | 15 -
arch/arm/mach-at91/setup.c | 3 -
common/Makefile | 2 +-
drivers/eeprom/at24.c | 2 +
drivers/i2c/busses/i2c-at91.c | 14 +-
drivers/net/macb.c | 1 +
drivers/pinctrl/pinctrl-at91.c | 20 +-
images/Makefile.at91 | 4 +
include/deep-probe.h | 7 +
include/driver.h | 13 +-
30 files changed, 571 insertions(+), 48 deletions(-)
create mode 100644 arch/arm/boards/sama5d4_wifx/Makefile
create mode 100644 arch/arm/boards/sama5d4_wifx/board.c
create mode 100644 arch/arm/boards/sama5d4_wifx/lowlevel.c
create mode 100644 arch/arm/dts/at91-sama5d4_wifx_l1.dts
create mode 100644 arch/arm/dts/sama5d4.dtsi
create mode 100644 arch/arm/mach-at91/sama5_bootsource.c
--
2.30.2
next reply other threads:[~2022-12-14 10:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-14 10:58 Ahmad Fatoum [this message]
2022-12-14 10:58 ` [PATCH 01/11] ARM: at91: sama5: switch to nonnaked entry functions Ahmad Fatoum
2022-12-16 6:49 ` Sascha Hauer
2022-12-14 10:58 ` [PATCH 02/11] ARM: at91: sama5d4: add entry point helpers Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 03/11] ARM: at91: sama5d4: enable for DT use Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 04/11] net: macb: match atmel,sama5d4-gem compatible Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 05/11] i2c: at91: extend for SAMA5D4 support Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 06/11] eeprom: at24: add 24mac402/602 support Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 07/11] driver: always ensure probe of RAM registered with mem_platform_driver Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 08/11] common: deep-probe: don't build without CONFIG_OFDEVICE Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 09/11] pinctrl: at91: make deep-probe compatible Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 10/11] ARM: at91: make bootsource code generic to all SAMA5 Ahmad Fatoum
2022-12-14 10:58 ` [PATCH 11/11] ARM: at91: SAMA5D4: add Wifx L1 support Ahmad Fatoum
2022-12-27 10:26 ` [PATCH 00/11] ARM: at91: sama5d4: add basic " Sam Ravnborg
2022-12-27 20:40 ` Ahmad Fatoum
2022-12-28 10:46 ` Sam Ravnborg
2022-12-28 11:13 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221214105831.844421-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox