* [PATCH v2] ARM: imx: add support for TQMa6UL SoM on MBa6ulxl
@ 2021-06-17 9:23 Rouven Czerwinski
2021-06-18 0:03 ` Trent Piepho
0 siblings, 1 reply; 3+ messages in thread
From: Rouven Czerwinski @ 2021-06-17 9:23 UTC (permalink / raw)
To: barebox; +Cc: Rouven Czerwinski
Add support for a TQMA6UL2L SoM on top of a MBa6ulxl baseboard. The
imxcfg header is for the LGA variant, the downstream U-Boot has an ifdef
for another "standard" variant, however this is not included here since
I don't have hardware to test.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
v1->v2:
- split up barebox and kernel dts
- fixed DEBUG_LL
- removed mmc0/1 alias switch
- add environment handling
- add MAC handling
- add default update handler
arch/arm/boards/Makefile | 1 +
arch/arm/boards/tqma6ulx/Makefile | 2 +
arch/arm/boards/tqma6ulx/board.c | 43 +++
| 102 ++++++
arch/arm/boards/tqma6ulx/lowlevel.c | 57 +++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6ul-mba6ulx.dts | 70 ++++
arch/arm/dts/imx6ul-mba6ulx.dtsi | 333 ++++++++++++++++++
arch/arm/dts/imx6ul-tqma6ulx.dtsi | 80 +++++
arch/arm/dts/tqma6ul-common.dtsi | 191 ++++++++++
arch/arm/dts/tqma6ulx-common.dtsi | 28 ++
arch/arm/mach-imx/Kconfig | 5 +
images/Makefile.imx | 2 +
13 files changed, 915 insertions(+)
create mode 100644 arch/arm/boards/tqma6ulx/Makefile
create mode 100644 arch/arm/boards/tqma6ulx/board.c
create mode 100644 arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
create mode 100644 arch/arm/boards/tqma6ulx/lowlevel.c
create mode 100644 arch/arm/dts/imx6ul-mba6ulx.dts
create mode 100644 arch/arm/dts/imx6ul-mba6ulx.dtsi
create mode 100644 arch/arm/dts/imx6ul-tqma6ulx.dtsi
create mode 100644 arch/arm/dts/tqma6ul-common.dtsi
create mode 100644 arch/arm/dts/tqma6ulx-common.dtsi
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 40b0af8d30..5075771dd1 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -144,6 +144,7 @@ obj-$(CONFIG_MACH_KINDLE_MX50) += kindle-mx50/
obj-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += toradex-colibri-t20/
obj-$(CONFIG_MACH_TOSHIBA_AC100) += toshiba-ac100/
obj-$(CONFIG_MACH_TQMA53) += tqma53/
+obj-$(CONFIG_MACH_TQMA6UL) += tqma6ulx/
obj-$(CONFIG_MACH_TQMA6X) += tqma6x/
obj-$(CONFIG_MACH_TURRIS_OMNIA) += turris-omnia/
obj-$(CONFIG_MACH_TX25) += karo-tx25/
diff --git a/arch/arm/boards/tqma6ulx/Makefile b/arch/arm/boards/tqma6ulx/Makefile
new file mode 100644
index 0000000000..01c7a259e9
--- /dev/null
+++ b/arch/arm/boards/tqma6ulx/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/tqma6ulx/board.c b/arch/arm/boards/tqma6ulx/board.c
new file mode 100644
index 0000000000..06b5e1322c
--- /dev/null
+++ b/arch/arm/boards/tqma6ulx/board.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ */
+
+#include <common.h>
+#include <bootsource.h>
+#include <init.h>
+#include <mach/generic.h>
+#include <mach/bbu.h>
+#include <of.h>
+#include <string.h>
+
+static int mba6ulx_probe(struct device_d *dev)
+{
+ int flags;
+
+ /* the bootloader is stored in one of the two boot partitions */
+ flags = bootsource_get_instance() == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0;
+ imx6_bbu_internal_mmc_register_handler("SD", "/dev/mmc0.barebox", flags);
+
+ flags = bootsource_get_instance() == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0;
+ imx6_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc1", flags);
+
+ if (bootsource_get_instance() == 0)
+ of_device_enable_path("/chosen/environment-sd");
+ else
+ of_device_enable_path("/chosen/environment-emmc");
+
+ return 0;
+}
+
+static const struct of_device_id mba6ulx_of_match[] = {
+ { .compatible = "tq,mba6ulx" },
+ { /* sentinel */ },
+};
+
+static struct driver_d mba6ulx_board_driver = {
+ .name = "board-mba6ulx",
+ .probe = mba6ulx_probe,
+ .of_compatible = mba6ulx_of_match,
+};
+device_platform_driver(mba6ulx_board_driver);
--git a/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg b/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
new file mode 100644
index 0000000000..4f71136149
--- /dev/null
+++ b/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+loadaddr 0x80000000
+soc imx6
+ivtofs 0x400
+
+/* Enable all clocks */
+wm 32 0x020c4068 0xffffffff
+wm 32 0x020c406c 0xffffffff
+wm 32 0x020c4070 0xffffffff
+wm 32 0x020c4074 0xffffffff
+wm 32 0x020c4078 0xffffffff
+wm 32 0x020c407c 0xffffffff
+wm 32 0x020c4080 0xffffffff
+
+/* This flash header contains support for the LGA Variant */
+/*
+ * =====================================================================
+ * IOMUX
+ * =====================================================================
+ */
+/* DDR IO TYPE: */
+wm 32 0x020E04B4 0x000C0000 /* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */
+wm 32 0x020E04AC 0x00000000 /* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */
+/* CLOCK: */
+wm 32 0x020E027C 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK0_P */
+/* Control: */
+wm 32 0x020E0250 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */
+wm 32 0x020E024C 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */
+wm 32 0x020E0490 0x00000030 /* IOMUXC_SW_PAD_CTL_GRP_ADDDS */
+wm 32 0x020E0288 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */
+wm 32 0x020E0270 0x00000000 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 - DSE can be configured using Group Control Register: IOMUXC_SW_PAD_CTL_GRP_CTLDS */
+wm 32 0x020E0260 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_ODT0 */
+wm 32 0x020E0264 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_ODT1 */
+wm 32 0x020E04A0 0x00000030 /* IOMUXC_SW_PAD_CTL_GRP_CTLDS */
+/* Data Strobes: */
+wm 32 0x020E0494 0x00020000 /* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */
+wm 32 0x020E0280 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0_P */
+wm 32 0x020E0284 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1_P */
+/* Data: */
+wm 32 0x020E04B0 0x00020000 /* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */
+wm 32 0x020E0498 0x00000030 /* IOMUXC_SW_PAD_CTL_GRP_B0DS */
+wm 32 0x020E04A4 0x00000030 /* IOMUXC_SW_PAD_CTL_GRP_B1DS */
+wm 32 0x020E0244 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */
+wm 32 0x020E0248 0x00000030 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */
+/*
+ * =====================================================================
+ * DDR Controller Registers
+ * =====================================================================
+ */
+wm 32 0x021B001C 0x00008000 /* MMDC_MDSCR - MMDC Core Special Command Register */
+/*
+ * ======================================================
+ * Calibrations:
+ * ======================================================
+ */
+wm 32 0x021B0800 0xA1390003 /* DDR_PHY_P0_MPZQHWCTRL , enable both one-time & periodic HW ZQ calibration. */
+
+wm 32 0x021B080C 0x00130003 /* MMDC_MPWLDECTRL0 */
+wm 32 0x021B083C 0x41540154 /* MMDC_MPDGCTRL0 */
+wm 32 0x021B0848 0x40405050 /* MMDC_MPRDDLCTL */
+wm 32 0x021B0850 0x40404E4C /* MMDC_MPWRDLCTL */
+wm 32 0x021B081C 0x33333333 /* MMDC_MPRDDQBY0DL */
+wm 32 0x021B0820 0x33333333 /* MMDC_MPRDDQBY1DL */
+wm 32 0x021B082C 0xf3333333 /* MMDC_MPWRDQBY0DL */
+wm 32 0x021B0830 0xf3333333 /* MMDC_MPWRDQBY1DL */
+wm 32 0x021B08C0 0x00921012 /* MMDC_MPDCCR */
+
+/* Complete calibration by forced measurement: */
+wm 32 0x021B08b8 0x00000800 /* DDR_PHY_P0_MPMUR0, frc_msr */
+
+/*
+ * =====================================================================
+ * MMDC init:
+ * =====================================================================
+ */
+wm 32 0x021B0004 0x0002002D /* MMDC0_MDPDC */
+wm 32 0x021B0008 0x00333030 /* MMDC0_MDOTC */
+wm 32 0x021B000C 0x676B52F3 /* MMDC0_MDCFG0 */
+wm 32 0x021B0010 0xB66D8B63 /* MMDC0_MDCFG1 */
+wm 32 0x021B0014 0x01FF00DB /* MMDC0_MDCFG2 */
+wm 32 0x021B0018 0x00201740 /* MMDC0_MDMISC */
+/* TODO: set configuration request again, also done by NXP */
+wm 32 0x021B001C 0x00008000 /* MMDC_MDSCR */
+wm 32 0x021B002C 0x000026D2 /* MMDC0_MDRWD; recommend to maintain the default values */
+wm 32 0x021B0030 0x006B1023 /* MMDC0_MDOR */
+wm 32 0x021B0040 0x00000047 /* CS0_END */
+wm 32 0x021B0000 0x83180000 /* MMDC0_MDCTL */
+/* Mode register writes for CS0 */
+wm 32 0x021B001C 0x02008032 /* MMDC0_MDSCR, MR2 write, CS0 */
+wm 32 0x021B001C 0x00008033 /* MMDC0_MDSCR, MR3 write, CS0 */
+wm 32 0x021B001C 0x00048031 /* MMDC0_MDSCR, MR1 write, CS0 */
+wm 32 0x021B001C 0x15208030 /* MMDC0_MDSCR, MR0 write, CS0 */
+wm 32 0x021B001C 0x04008040 /* MMDC0_MDSCR, ZQ calibration command sent to device on CS0 */
+/* Mode register writes for CS1, not used / needed */
+/* final DDR setup, before operation start: */
+wm 32 0x021B0020 0x00000800 /* MMDC0_MDREF */
+wm 32 0x021B0818 0x00000227 /* DDR_PHY_P0_MPODTCTRL */
+wm 32 0x021B0004 0x0002552D /* MMDC0_MDPDC now SDCTL power down enabled */
+wm 32 0x021B0404 0x00011006 /* MMDC0_MAPSR ADOPT power down enabled */
+wm 32 0x021B001C 0x00000000 /* MMDC0_MDSCR, clear this register (especially the configuration bit as initialization is complete) */
+
+#include <mach/habv4-imx6-gencsf.h>
diff --git a/arch/arm/boards/tqma6ulx/lowlevel.c b/arch/arm/boards/tqma6ulx/lowlevel.c
new file mode 100644
index 0000000000..68f7b1f2a1
--- /dev/null
+++ b/arch/arm/boards/tqma6ulx/lowlevel.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Rouven Czerwinski, Pengutronix
+ */
+
+#include <common.h>
+#include <debug_ll.h>
+#include <firmware.h>
+#include <mach/generic.h>
+#include <asm/barebox-arm.h>
+#include <mach/esdctl.h>
+#include <mach/iomux-mx6ul.h>
+#include <asm/cache.h>
+
+extern char __dtb_z_imx6ul_mba6ulx_start[];
+
+static void setup_uart(void)
+{
+ void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
+
+ imx6_ungate_all_peripherals();
+
+ imx_setup_pad(iomuxbase, MX6_PAD_UART1_TX_DATA__UART1_DCE_TX);
+ imx_setup_pad(iomuxbase, MX6_PAD_UART1_RX_DATA__UART1_DCE_RX);
+
+ imx6_uart_setup((void *)MX6_UART1_BASE_ADDR);
+ pbl_set_putc(imx_uart_putc, (void *)MX6_UART1_BASE_ADDR);
+
+ pr_debug("\n");
+
+}
+
+static void noinline start_mba6ulx(void)
+{
+ setup_uart();
+
+ imx6ul_barebox_entry(__dtb_z_imx6ul_mba6ulx_start);
+}
+
+ENTRY_FUNCTION(start_imx6ul_mba6ulx, r0, r1, r2)
+{
+
+ imx6ul_cpu_lowlevel_init();
+
+ arm_setup_stack(0x00910000);
+
+ if (IS_ENABLED(CONFIG_DEBUG_LL)) {
+ imx6_uart_setup_ll();
+ putc_ll('>');
+ }
+
+ relocate_to_current_adr();
+ setup_c();
+ barrier();
+
+ start_mba6ulx();
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a637869fb6..d5ac4f535e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -127,6 +127,7 @@ lwl-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += imx8mq-evk.dtb.o
lwl-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o
lwl-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o
lwl-$(CONFIG_MACH_TQMA53) += imx53-mba53.dtb.o
+lwl-$(CONFIG_MACH_TQMA6UL) += imx6ul-mba6ulx.dtb.o
lwl-$(CONFIG_MACH_TQMA6X) += imx6dl-mba6x.dtb.o imx6q-mba6x.dtb.o
lwl-$(CONFIG_MACH_TX25) += imx25-karo-tx25.dtb.o
lwl-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
diff --git a/arch/arm/dts/imx6ul-mba6ulx.dts b/arch/arm/dts/imx6ul-mba6ulx.dts
new file mode 100644
index 0000000000..e2ed694ff9
--- /dev/null
+++ b/arch/arm/dts/imx6ul-mba6ulx.dts
@@ -0,0 +1,70 @@
+
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2021 Pengutronix e.K.
+ * Author: Rouven Czerwinski
+ */
+
+/dts-v1/;
+
+#include "imx6ul-mba6ulx.dtsi"
+
+/ {
+ chosen {
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &environment_sd;
+ status = "disabled";
+ };
+ environment-emmc {
+ compatible = "barebox,environment";
+ device-path = &environment_emmc;
+ status = "disabled";
+ };
+ };
+};
+
+&usdhc2 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ environment_emmc: partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+ };
+};
+
+&usdhc1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ environment_sd: partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+ };
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec1 0x620 &fec2 0x632>;
+};
+
+/* include the FIT public key for verifying on demand */
+#ifdef CONFIG_BOOTM_FITIMAGE_PUBKEY
+#include CONFIG_BOOTM_FITIMAGE_PUBKEY
+#endif
diff --git a/arch/arm/dts/imx6ul-mba6ulx.dtsi b/arch/arm/dts/imx6ul-mba6ulx.dtsi
new file mode 100644
index 0000000000..da73248084
--- /dev/null
+++ b/arch/arm/dts/imx6ul-mba6ulx.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2016 TQ Systems GmbH
+ * Author: Marco Felsch
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ul-tqma6ulx.dtsi"
+
+/ {
+ model = "TQ TQMa6ULx SoM on MBa6ULx";
+ compatible = "tq,mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ reg_mba6ul_3v3: regulator-mba6ul-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-mba6ul-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_mba6ul_5v0: regulator-mba6ul-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-mba6ul-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "otg2-vbus-supply-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_mba6ul_5v0>;
+ };
+
+ reg_otg1vbus_5v0: regulator-otg1-vbus-5v0 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "otg1-vbus-supply-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_mba6ul_5v0>;
+ };
+
+ reg_fec_3v3: regulator-fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_mba6ul_3v3>;
+ };
+
+ reg_mpcie: regulator-mpcie-1v5 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ regulator-name = "mpcie-1v5";
+ /* gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; */
+ enable-active-high;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <®_mba6ul_3v3>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ phy-supply = <®_fec_3v3>;
+ phy-reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <26>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_fec_3v3>;
+ phy-reset-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ phy-reset-duration = <26>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ max-speed = <100>;
+ reg = <0>;
+ /* ToDo: check if following 2 lines are required */
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ max-speed = <100>;
+ reg = <1>;
+ /* ToDo: check if following 2 lines are required */
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ expander_io: gpio-expander@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "okay";
+ };
+
+ expander_in: gpio-expander@21 {
+ compatible = "nxp,pca9554";
+ reg = <0x21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_expander_irq>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "okay";
+ };
+
+ expander_out: gpio-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "okay";
+ };
+
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ jc42_1b: eeprom-temperature-sensor@1b {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1b>;
+ status = "okay";
+ };
+
+ se97_53: eeprom-temperature-sensor@53 {
+ compatible = "nxp,spd";
+ reg = <0x53>;
+ pagesize = <16>;
+ status = "okay";
+ };
+
+};
+
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x4001b8b0
+ MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8
+ /* mdio */
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_expander_irq: expanderirqgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059
+ MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0
+ /* PWR */
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x0001b099
+ >;
+ };
+
+ pinctrl_usb_otg2: usbotg2grp {
+ fsl,pins = <
+ /* reset */
+ MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0001b099
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059
+ /* CD */
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9
+ /* CD */
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9
+ /* CD */
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* otg-port */
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ vbus-supply = <®_otg1vbus_5v0>;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+/* 7-port usb hub */
+/* id, pwr, oc pins not connected */
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ disable-over-current;
+ vbus-supply = <®_otg2vbus_5v0>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ bus-width = <4>;
+ vmmc-supply = <®_mba6ul_3v3>;
+ vqmmc-supply = <®_vccsd>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6ul-tqma6ulx.dtsi b/arch/arm/dts/imx6ul-tqma6ulx.dtsi
new file mode 100644
index 0000000000..77112e1974
--- /dev/null
+++ b/arch/arm/dts/imx6ul-tqma6ulx.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <arm/imx6ul.dtsi>
+#include "tqma6ul-common.dtsi"
+#include "tqma6ulx-common.dtsi"
+
+/ {
+ model = "TQMa6ULx SOM";
+};
+
+&cpu0 {
+ cooling-min-level = <0>;
+ cooling-max-level = <3>;
+ #cooling-cells = <2>;
+};
+
+&iomuxc {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170e1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170e1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170e1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170e1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170e1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170e1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170e1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170e1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170e1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+};
+
+&usdhc2 {
+ fsl,tuning-step= <6>;
+ max-frequency = <99000000>;
+ assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+ assigned-clock-rates = <0>, <198000000>;
+};
diff --git a/arch/arm/dts/tqma6ul-common.dtsi b/arch/arm/dts/tqma6ul-common.dtsi
new file mode 100644
index 0000000000..92b295891c
--- /dev/null
+++ b/arch/arm/dts/tqma6ul-common.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&cpu0 {
+ arm-supply = <®_arm>;
+ soc-supply = <®_soc>;
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ pfuze3000: pmic@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ reg_sw1a: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <6250>;
+ /* not used */
+ };
+
+ reg_sw1b_core: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ reg_sw2: sw2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ reg_sw3_ddr: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_swbst: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ /* not used */
+ };
+
+ reg_snvs_3v0: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vrefddr: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vccsd: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_v33_3v3: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vldo1_3v3: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ /* not used */
+ };
+
+ reg_vldo2: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ /* not used */
+ };
+
+ reg_vldo3: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ /* not used */
+ };
+
+ reg_vldo4: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-fixed;
+ regulator-always-on;
+ };
+ };
+ };
+
+ jc42_1a: eeprom-temperature-sensor@1a {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1a>;
+ status = "okay";
+ };
+
+ m24c64_50: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ status = "okay";
+ };
+
+ m24c02_52: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ status = "okay";
+ };
+
+ rtc1: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ status = "okay";
+ };
+};
+
+&iomuxc {
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0
+ MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0
+ >;
+ };
+
+ /*
+ * currently not used, potentially dangerous if used on
+ * baseboard
+ */
+ pinctrl_pmic: pmic {
+ fsl,pins = <
+ /* PMIC irq */
+ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099
+ >;
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: spinor@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <33000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <0>;
+ };
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+/* eMMC */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz" , "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+
+ bus-width = <8>;
+ disable-wp;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
diff --git a/arch/arm/dts/tqma6ulx-common.dtsi b/arch/arm/dts/tqma6ulx-common.dtsi
new file mode 100644
index 0000000000..3e398d25ad
--- /dev/null
+++ b/arch/arm/dts/tqma6ulx-common.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&iomuxc {
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+};
+
+®_sw2 {
+ regulator-always-on;
+};
+
+/* eMMC */
+&usdhc2 {
+ vmmc-supply = <®_sw2>;
+ vqmmc-supply = <®_vldo4>;
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f5b762ce5..b068f08a0a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -375,6 +375,11 @@ config MACH_TQMA6X
bool "TQ tqma6x on mba6x"
select ARCH_IMX6
+config MACH_TQMA6UL
+ bool "TQ tqma6ul on mba6ulx"
+ select ARCH_IMX6UL
+ select ARM_USE_COMPRESSED_DTB
+
config MACH_TX6X
bool "Karo TX6x"
select ARCH_IMX6
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 382493488b..841c7a1b76 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -179,6 +179,8 @@ $(call build_imx_habv4img, CONFIG_MACH_TQMA6X, start_imx6dl_mba6x, tqma6x/flash-
$(call build_imx_habv4img, CONFIG_MACH_TQMA6X, start_imx6q_mba6x, tqma6x/flash-header-tqma6q, tq-tqma6q-mba6x)
+$(call build_imx_habv4img, CONFIG_MACH_TQMA6UL, start_imx6ul_mba6ulx, tqma6ulx/flash-header-imx6ul-tqma6ulx, tq-tqma6ul-mba6ulx)
+
$(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_pbab01_4gib, phytec-som-imx6/flash-header-phytec-pfla02-4gib, phytec-pbab01-4gib)
$(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_pbab01_2gib, phytec-som-imx6/flash-header-phytec-pfla02-2gib, phytec-pbab01-2gib)
--
2.31.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] ARM: imx: add support for TQMa6UL SoM on MBa6ulxl
2021-06-17 9:23 [PATCH v2] ARM: imx: add support for TQMa6UL SoM on MBa6ulxl Rouven Czerwinski
@ 2021-06-18 0:03 ` Trent Piepho
2022-02-07 15:15 ` Rouven Czerwinski
0 siblings, 1 reply; 3+ messages in thread
From: Trent Piepho @ 2021-06-18 0:03 UTC (permalink / raw)
To: Rouven Czerwinski; +Cc: Barebox List
On Thu, Jun 17, 2021 at 2:25 AM Rouven Czerwinski
<r.czerwinski@pengutronix.de> wrote:
> +
> +static void setup_uart(void)
> +{
> + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
> +
> + imx6_ungate_all_peripherals();
> +
> + imx_setup_pad(iomuxbase, MX6_PAD_UART1_TX_DATA__UART1_DCE_TX);
> + imx_setup_pad(iomuxbase, MX6_PAD_UART1_RX_DATA__UART1_DCE_RX);
>From what I can tell, imx_setup_pad() will program the conf register
with 0. Not a more typical value like 0x1b0b1 that is in most dts
files. Does this actually work? It seems like one needs to OR in the
pad conf value to the pinmux config constant to actually program this
correctly.
> + imx6_uart_setup((void *)MX6_UART1_BASE_ADDR);
> + pbl_set_putc(imx_uart_putc, (void *)MX6_UART1_BASE_ADDR);
> +
> + pr_debug("\n");
Do you actually get the output from this? I'm trying to add a new
imx6ul board and it seems like one needs a delay between the uart
setup and the uart actually working to output data. Or perhaps this
is just my board.
> +static void noinline start_mba6ulx(void)
> +{
> + setup_uart();
Why setup uart when LL_DEBUG is not enabled? This dts should have
this working without any extra setup.
> +
> + imx6ul_barebox_entry(__dtb_z_imx6ul_mba6ulx_start);
> +}
> +
> +ENTRY_FUNCTION(start_imx6ul_mba6ulx, r0, r1, r2)
> +{
> +
> + imx6ul_cpu_lowlevel_init();
> +
> + arm_setup_stack(0x00910000);
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL)) {
> + imx6_uart_setup_ll();
Don't you need the muxing and other code in setup_uart() for this to work?
> + putc_ll('>');
> + }
> +
> + relocate_to_current_adr();
> + setup_c();
> + barrier();
> +
> + start_mba6ulx();
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] ARM: imx: add support for TQMa6UL SoM on MBa6ulxl
2021-06-18 0:03 ` Trent Piepho
@ 2022-02-07 15:15 ` Rouven Czerwinski
0 siblings, 0 replies; 3+ messages in thread
From: Rouven Czerwinski @ 2022-02-07 15:15 UTC (permalink / raw)
To: Trent Piepho; +Cc: Barebox List
Hi Trent,
On Thu, 2021-06-17 at 17:03 -0700, Trent Piepho wrote:
> On Thu, Jun 17, 2021 at 2:25 AM Rouven Czerwinski
> <r.czerwinski@pengutronix.de> wrote:
> > +
> > +static void setup_uart(void)
> > +{
> > + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
> > +
> > + imx6_ungate_all_peripherals();
> > +
> > + imx_setup_pad(iomuxbase, MX6_PAD_UART1_TX_DATA__UART1_DCE_TX);
> > + imx_setup_pad(iomuxbase, MX6_PAD_UART1_RX_DATA__UART1_DCE_RX);
>
> From what I can tell, imx_setup_pad() will program the conf register
> with 0. Not a more typical value like 0x1b0b1 that is in most dts
> files. Does this actually work? It seems like one needs to OR in the
> pad conf value to the pinmux config constant to actually program this
> correctly.
No, while imx_setup_pad can include the pad control, the mux defines
above do not include one and in this case the pad configuration is not
written (iomux-v3.h:137). So the imx_setup_pad above only touches the
mux configuration, but keeps the pad configuration as is.
>
> > + imx6_uart_setup((void *)MX6_UART1_BASE_ADDR);
> > + pbl_set_putc(imx_uart_putc, (void *)MX6_UART1_BASE_ADDR);
> > +
> > + pr_debug("\n");
>
> Do you actually get the output from this? I'm trying to add a new
> imx6ul board and it seems like one needs a delay between the uart
> setup and the uart actually working to output data. Or perhaps this
> is just my board.
Yes, on my board this adds a newline within the PBL console.
>
> > +static void noinline start_mba6ulx(void)
> > +{
> > + setup_uart();
>
> Why setup uart when LL_DEBUG is not enabled? This dts should have
> this working without any extra setup.
Because this boards supports the PBL console and setup_uart is required
for the PBL console to work, since the PBL does not parse this
information from the DT.
>
> > +
> > + imx6ul_barebox_entry(__dtb_z_imx6ul_mba6ulx_start);
> > +}
> > +
> > +ENTRY_FUNCTION(start_imx6ul_mba6ulx, r0, r1, r2)
> > +{
> > +
> > + imx6ul_cpu_lowlevel_init();
> > +
> > + arm_setup_stack(0x00910000);
> > +
> > + if (IS_ENABLED(CONFIG_DEBUG_LL)) {
> > + imx6_uart_setup_ll();
>
> Don't you need the muxing and other code in setup_uart() for this to work?
No, conveniently the board uses the default configuration for UART one.
The muxing setup for the PBL console could be removed. Sascha, what do
you think?
--
Pengutronix e.K. | Rouven Czerwinski |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-02-07 15:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-17 9:23 [PATCH v2] ARM: imx: add support for TQMa6UL SoM on MBa6ulxl Rouven Czerwinski
2021-06-18 0:03 ` Trent Piepho
2022-02-07 15:15 ` Rouven Czerwinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox