mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH] Documentation: reboot-mode: add note about /env/bmode
 2021-09-22  9:04 UTC  - mbox.gz / Atom

[PATCH] kbuild: dtc: Allow adding device tree fragments via config
 2021-09-22  8:54 UTC  (6+ messages) - mbox.gz / Atom

at91 sama5d3 "regressions"
 2021-09-22  7:41 UTC  (14+ messages) - mbox.gz / Atom
` [PATCH 1/4] common.h: reintroduce region_overlap() as, old_region_overlap()
` [PATCH 2/4] ARM: copy data if there is a region overlap
` [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
` [PATCH 4/4] lds: the RO_DATA_SECTION macro does not work on my SAMA5D3 board

[PATCH master 1/2] startup: don't read glob_t if glob("/env/init/*") fails
 2021-09-22  7:14 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH master 2/2] common: menutree: prevent read of uninitialized memory in error path

[PATCH 0/5] ARM: at91: sama5d3_xplained: migrate to DT
 2021-09-22  6:50 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH master 1/5] fs: fat: pbl: support >32M alignment for first partition
` [PATCH master 2/5] ARM: at91: at91sam9263ek: add device tree check for board code
` [PATCH 3/5] Documentation: boards: at91: remove done TODOs
` [PATCH 4/5] ARM: at91: sam9_smc: register driver earlier
` [PATCH 5/5] ARM: AT91: migrate sama5d3-xplained to DT

CRC32 verification on NAND flash
 2021-09-21 14:10 UTC  - mbox.gz / Atom

New RISCV board (cartesi-machine)
 2021-09-20 19:41 UTC  (7+ messages) - mbox.gz / Atom

[PATCH v3 0/7] add noswitch support for skov boards
 2021-09-20 11:15 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH v3 1/7] ARM: dts: skov-imx6: add USB nodes
` [PATCH v3 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
` [PATCH v3 3/7] ARM: boards: skov-imx6: add switch detection
` [PATCH v3 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
` [PATCH v3 5/7] ARM: boards: skov-imx6: fixup different DTS variants
` [PATCH v3 6/7] ARM: boards: skov-imx6: start using deep-probe
` [PATCH v3 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script

[PATCH v2 1/4] common: remove !SANDBOX dependency for target tools
 2021-09-17 17:41 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 2/4] common: add new menu "
` [PATCH v2 3/4] scripts: omap3-usb-loader: make proper use of pkg-config --cflags
` [PATCH v2 4/4] scripts: allow building USB loader tools for target as well

[PATCH v3] ARM: document arm_setup_stack() pitfalls
 2021-09-17 12:11 UTC  - mbox.gz / Atom

[PATCH 1/2] pinctrl: bcm2835: Probe driver earlier
 2021-09-17  9:41 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711

[PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option
 2021-09-16 11:48 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] ARM: document arm_setup_stack() pitfalls
 2021-09-16 10:48 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 1/2] mci-bcm2835: Don't block infinitely while waiting for a command completion
 2021-09-16  9:36 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH 2/2] mci-bcm2835: Fix return type handling of bcm2835_mci_wait_command_done()

[PATCH] ARM: document arm_stack_setup() pitfalls
 2021-09-16  9:35 UTC  - mbox.gz / Atom

[PATCH] RISC-V: virt: support poweroff/restart on tinyemu
 2021-09-16  9:35 UTC  - mbox.gz / Atom

[PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function
 2021-09-16  9:35 UTC  - mbox.gz / Atom

[PATCH master] virtio: implement remove callbacks
 2021-09-16  9:34 UTC  - mbox.gz / Atom

[PATCH] net: add virtio network driver
 2021-09-16  9:33 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH] fixup! "

[PATCH] arm64: Don't truncate upper 32 bits in ENTRY_FUNCTION arg registers
 2021-09-16  9:33 UTC  - mbox.gz / Atom

[PATCH 1/5] common: machine_id: support /chosen/barebox, machine-id-path override
 2021-09-15 10:55 UTC  (4+ messages) - mbox.gz / Atom

[PATCH 0/9] ARM: i.MX8M: add nano support
 2021-09-15 10:39 UTC  (14+ messages) - mbox.gz / Atom
` [PATCH 1/9] ARM: i.MX: add i.MX8MN (Nano) SoC support boilerplate
` [PATCH 2/9] clk: imx: add i.MX8MN (Nano) support
` [PATCH 3/9] ARM: i.MX8MN: adapt early clock support
` [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
` [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency
` [PATCH 6/9] ddr: imx8m: add i.MX8MN (Nano) support
` [PATCH 7/9] ddr: imx8m: ddrphy_train: add DDR4 support
` [PATCH 8/9] scripts: imx: add i.MX8MN support to imx-image
` [PATCH 9/9] ARM: i.MX8MN: add i.MX8MN-EVK support

[PATCH 1/4] common: remove !SANDBOX dependency for target tools
 2021-09-15 10:23 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH 2/4] common: add new menu "
` [PATCH 3/4] scripts: unify libusb.h inclusion
` [PATCH 4/4] scripts: allow building USB loader tools for target as well

[PATCH] mci: Improve error message for non-existent vmmc regulator
 2021-09-14 11:22 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] fs: remove unused struct fs_device_d::parent_device
 2021-09-14 10:10 UTC  (4+ messages) - mbox.gz / Atom

[PATCH v1] net: dhcp: set default DHCP vendor ID to "barebox"
 2021-09-14  6:48 UTC  - mbox.gz / Atom

[PATCH v1] net: dhcp: send current hostname as part of the DHCP request
 2021-09-14  6:30 UTC  - mbox.gz / Atom

[PATCH 0/2] gpio: add driver for xilinx zynq and zynqmp
 2021-09-13 16:43 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 1/2] "
` [PATCH 2/2] arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards

[PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources
 2021-09-13 12:13 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board
` [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links
` [PATCH v2 3/3] arm: zynqmp: add boot source support

[PATCH 0/3] arm: zynqmp: add support for zcu106 and boot sources
 2021-09-13 12:03 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH 1/3] arm: zynqmp: add support for xilinx zcu106 board
` [PATCH 2/3] Documentation: boards: zynqmp: fix broken links
` [PATCH 3/3] arm: zynqmp: add boot source support

[PATCH master] base: driver: fix double removal of child devices
 2021-09-13 10:18 UTC  (3+ messages) - mbox.gz / Atom

[PATCH master v2] base: driver: fix double removal of child devices
 2021-09-13 10:17 UTC  - mbox.gz / Atom

[PATCH master] blspec: fix use-after-free of firmware search path
 2021-09-13  8:29 UTC  - mbox.gz / Atom

[RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
 2021-09-10 18:27 UTC  (5+ messages) - mbox.gz / Atom

[PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget
 2021-09-10 10:29 UTC  - mbox.gz / Atom

barebox environment early loading
 2021-09-09 17:16 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes
 2021-09-09 12:09 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
` [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection
` [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
` [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants
` [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe
` [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script

[PATCH v1 1/8] ARM: dts: skov-imx6: add USB nodes
 2021-09-09 10:36 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH v1 2/8] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
` [PATCH v1 3/8] ARM: boards: skov-imx6: add switch detection
` [PATCH v1 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
` [PATCH v1 5/8] ARM: boards: skov-imx6: fixup different DTS variants
` [PATCH v1 6/8] ARM: boards: skov-imx6: start using deep-probe
` [PATCH v1 7/8] ARM: boards: skov-imx6: set net.ifup_force_detect if no switch is detected
` [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters

[PATCH] video: Fix broken bcm2835 fb driver
 2021-09-08 18:36 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 0/2] usb: dwc2: fix phy dependecy
 2021-09-08 12:58 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 1/2] usb: dwc2: Make having a phy optional
    ` [PATCH 1/2 v2] "
` [PATCH 2/2] ARM: rpi_defconfig: Enable PHY core for dwc2 usb driver

[PATCH] Documentation: Replace ENTRY_POINT with ENTRY_FUNCTION
 2021-09-08  8:41 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH] Documentation: Typo fix in command example

[PATCH] common: Select CRC32 dependency for DEFAULT_ENVIRONMENT
 2021-09-07 12:45 UTC  - mbox.gz / Atom

[PATCH] ARM: i.MX8MP: bbu: use correct offset for eMMC boot partition
 2021-09-05 14:00 UTC  (2+ messages) - mbox.gz / Atom

[PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
 2021-09-02  7:00 UTC  (2+ messages) - mbox.gz / Atom

[PATCH master] of: overlay: don't do fixups on empty global.of.overlay.dir
 2021-08-31 16:11 UTC  - mbox.gz / Atom

[PATCH] net: cpsw: fix ethernet bringup in case of a fixed-link phy
 2021-08-31 12:57 UTC  - mbox.gz / Atom

[PATCH v2 1/3] ARM: i.MX8MP: bbu: fix wrong flash header offset for eMMC boot partition
 2021-08-31  9:42 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP
` [PATCH v2 3/3] ARM: i.MX8MP: EVK: change bbu handler from eMMC user to boot partition

[PATCH v2] mci: sdhci: fix big-endian write for blockcount/size
 2021-08-31  6:47 UTC  - mbox.gz / Atom

[PATCH RESEND v4 0/8] RISC-V: add LiteX SoC support
 2021-08-31  4:38 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree
` [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support

[PATCH] ARM: i.MX8MP: move SCTR enabling into imx8mp_cpu_lowlevel_init
 2021-08-30 11:53 UTC  - mbox.gz / Atom

[PATCH] state: backend_raw: fix ignoring unpack failures
 2021-08-25 14:49 UTC  - mbox.gz / Atom

[PATCH v1 0/6] protonic: maintaining and new board
 2021-08-25 12:54 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support
` [PATCH v1 2/4] ARM: boards: protonic-imx6: use decode error values instead error numbers
` [PATCH v1 3/4] ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default
` [PATCH v1 4/4] ARM: boards: protonic-imx6: Add support for jozacp board

[PATCH] mtd: spi-nor: remove use-large-blocks left over
 2021-08-25 11:35 UTC  - mbox.gz / Atom

[PATCH] Documentation: framebuffer: remove note about lack of backlight support
 2021-08-25  9:27 UTC  - mbox.gz / Atom

[PATCH] net: eqos: let phy_resume handle fixed link phys
 2021-08-25  7:05 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] usb: imx-us-phy: add vbus_valid ro parameter
 2021-08-24 12:12 UTC  - mbox.gz / Atom

[PATCH] usb: imx-us-phy: add vbus_valid ro parameter
 2021-08-24 11:21 UTC  (4+ messages) - mbox.gz / Atom

[PATCH 1/2] video: simplefb-client: populate video mode field
 2021-08-24  9:51 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH 2/2] video: simplefb-client: make probe less verbose

[PATCH v2 0/8] XN Support for reserved-memory areas
 2021-08-24  7:09 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH v2 3/8] ARM: mmu: use reserve mem entries to modify maps
` [PATCH v2 8/8] PBL: enable LIBFDT for OP-TEE early loading

v2021.08.0
 2021-08-23 14:27 UTC  - mbox.gz / Atom

[PATCH v2] arm: rockchip-rk3568-evb: add hardware id detection
 2021-08-23 14:11 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v3 0/3] NXP IFC nand driver
 2021-08-23 14:03 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 3/3] ls1046ardb: enable IFC NAND

[PATCH] ARM: zynqmp: use std_file_update as update handler
 2021-08-23 13:53 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2 0/3] firmware: zynqmp-fpga: fix fpga loading with optimized string functions
 2021-08-23 13:51 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2 1/2] file_list: add file_list_parse_null()
 2021-08-23 13:48 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v1 0/6] protonic: fix and maintaining
 2021-08-23 13:45 UTC  (2+ messages) - mbox.gz / Atom

page:  |  | latest

mail archive of the barebox mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lore.barebox.org/barebox/0 barebox/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 barebox barebox/ https://lore.barebox.org/barebox \
		barebox@lists.infradead.org
	public-inbox-index barebox

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git