[PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function
2021-10-02 9:19 UTC (2+ messages)
[PATCH] arm64: Don't truncate upper 32 bits in ENTRY_FUNCTION arg registers
2021-10-02 9:18 UTC (2+ messages)
[PATCH master] virtio: implement remove callbacks
2021-10-02 9:16 UTC (2+ messages)
[PATCH 1/2] mci-bcm2835: Don't block infinitely while waiting for a command completion
2021-10-02 9:14 UTC (3+ messages)
` [PATCH 2/2] mci-bcm2835: Fix return type handling of bcm2835_mci_wait_command_done()
[PATCH v2 1/4] common: remove !SANDBOX dependency for target tools
2021-10-02 9:13 UTC (5+ messages)
` [PATCH v2 2/4] common: add new menu "
` [PATCH v2 3/4] scripts: omap3-usb-loader: make proper use of pkg-config --cflags
` [PATCH v2 4/4] scripts: allow building USB loader tools for target as well
[PATCH v3] ARM: document arm_setup_stack() pitfalls
2021-10-02 8:54 UTC (2+ messages)
[PATCH 1/2] pinctrl: bcm2835: Probe driver earlier
2021-10-02 8:51 UTC (6+ messages)
` [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711
'of_compatible' and 'model' imd records are unusable
2021-10-02 8:48 UTC
'of_compatible' and 'model' imd records are unusable
2021-10-01 23:47 UTC (2+ messages)
[PATCH v3 0/7] add noswitch support for skov boards
2021-10-01 14:29 UTC (9+ messages)
` [PATCH v3 1/7] ARM: dts: skov-imx6: add USB nodes
` [PATCH v3 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
` [PATCH v3 3/7] ARM: boards: skov-imx6: add switch detection
` [PATCH v3 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
` [PATCH v3 5/7] ARM: boards: skov-imx6: fixup different DTS variants
` [PATCH v3 6/7] ARM: boards: skov-imx6: start using deep-probe
` [PATCH v3 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script
[PATCH 0/5] ARM: at91: sama5d3_xplained: migrate to DT
2021-10-01 13:36 UTC (8+ messages)
` [PATCH master 1/5] fs: fat: pbl: support >32M alignment for first partition
` [PATCH master 2/5] ARM: at91: at91sam9263ek: add device tree check for board code
` [PATCH 3/5] Documentation: boards: at91: remove done TODOs
` [PATCH 4/5] ARM: at91: sam9_smc: register driver earlier
` [PATCH 5/5] ARM: AT91: migrate sama5d3-xplained to DT
[PATCH master 1/2] startup: don't read glob_t if glob("/env/init/*") fails
2021-10-01 13:29 UTC (3+ messages)
` [PATCH master 2/2] common: menutree: prevent read of uninitialized memory in error path
[PATCH master] power: reset: nvmem-reboot-mode: disable device tree fixup
2021-10-01 13:27 UTC (2+ messages)
[PATCH v2] Documentation: reboot-mode: add note about /env/bmode
2021-10-01 13:25 UTC (2+ messages)
[PATCH v2 1/1] kbuild: dtc: Allow adding device tree fragments via config
2021-10-01 12:52 UTC (2+ messages)
[PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM
2021-10-01 12:14 UTC (3+ messages)
[PATCH RESEND v4 0/8] RISC-V: add LiteX SoC support
2021-10-01 10:21 UTC (17+ messages)
` [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree
` [PATCH RESEND v4 4/8] gpio: add driver for 74xx-ICs with MMIO access
` [PATCH RESEND v4 5/8] spi: add litex spiflash driver
` [PATCH RESEND v4 6/8] net: add LiteEth driver
` [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
` [PATCH RESEND v4 8/8] RISC-V: add litex_linux_defconfig
[PATCH v2 0/8] ARM: i.MX8M: add nano support
2021-10-01 10:09 UTC (9+ messages)
` [PATCH v2 1/8] ARM: i.MX: add i.MX8MN (Nano) SoC support boilerplate
` [PATCH v2 2/8] clk: imx: add i.MX8MN (Nano) support
` [PATCH v2 3/8] ARM: i.MX8MN: adapt early clock support
` [PATCH v2 4/8] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
` [PATCH v2 5/8] ddr: imx8m: add "
` [PATCH v2 6/8] ddr: imx8m: ddrphy_train: add DDR4 support
` [PATCH v2 7/8] scripts: imx: add i.MX8MN support to imx-image
` [PATCH v2 8/8] ARM: i.MX8MN: add i.MX8MN-EVK support
[PATCH v=2] serial: implement riscv SBI console support
2021-10-01 9:27 UTC (2+ messages)
[PATCH] pbl/Kconfig: fix typo "inflluences" -> "influences"
2021-10-01 9:22 UTC (2+ messages)
Fwd: [PATCH] serial: implement riscv SBI console support
2021-09-27 20:08 UTC (3+ messages)
CRC32 verification on NAND flash
2021-09-24 14:21 UTC (3+ messages)
[PATCH 0/9] ARM: i.MX8M: add nano support
2021-09-24 3:12 UTC (8+ messages)
` [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support
` [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency
[PATCH] ARM: at91: sama5d27_som1_ek: populate MAC address from EEPROM
2021-09-22 10:54 UTC (2+ messages)
[PATCH] Documentation: reboot-mode: add note about /env/bmode
2021-09-22 9:04 UTC
[PATCH] kbuild: dtc: Allow adding device tree fragments via config
2021-09-22 8:54 UTC (6+ messages)
at91 sama5d3 "regressions"
2021-09-22 7:41 UTC (14+ messages)
` [PATCH 1/4] common.h: reintroduce region_overlap() as, old_region_overlap()
` [PATCH 2/4] ARM: copy data if there is a region overlap
` [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"
` [PATCH 4/4] lds: the RO_DATA_SECTION macro does not work on my SAMA5D3 board
New RISCV board (cartesi-machine)
2021-09-20 19:41 UTC (7+ messages)
[PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option
2021-09-16 11:48 UTC (2+ messages)
[PATCH v2] ARM: document arm_setup_stack() pitfalls
2021-09-16 10:48 UTC (3+ messages)
[PATCH] ARM: document arm_stack_setup() pitfalls
2021-09-16 9:35 UTC
[PATCH] RISC-V: virt: support poweroff/restart on tinyemu
2021-09-16 9:35 UTC
[PATCH] net: add virtio network driver
2021-09-16 9:33 UTC (2+ messages)
` [PATCH] fixup! "
[PATCH 1/5] common: machine_id: support /chosen/barebox, machine-id-path override
2021-09-15 10:55 UTC (4+ messages)
[PATCH 1/4] common: remove !SANDBOX dependency for target tools
2021-09-15 10:23 UTC (12+ messages)
` [PATCH 2/4] common: add new menu "
` [PATCH 3/4] scripts: unify libusb.h inclusion
` [PATCH 4/4] scripts: allow building USB loader tools for target as well
[PATCH] mci: Improve error message for non-existent vmmc regulator
2021-09-14 11:22 UTC (2+ messages)
[PATCH] fs: remove unused struct fs_device_d::parent_device
2021-09-14 10:10 UTC (4+ messages)
[PATCH v1] net: dhcp: set default DHCP vendor ID to "barebox"
2021-09-14 6:48 UTC
[PATCH v1] net: dhcp: send current hostname as part of the DHCP request
2021-09-14 6:30 UTC
[PATCH 0/2] gpio: add driver for xilinx zynq and zynqmp
2021-09-13 16:43 UTC (5+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards
[PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources
2021-09-13 12:13 UTC (4+ messages)
` [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board
` [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links
` [PATCH v2 3/3] arm: zynqmp: add boot source support
[PATCH 0/3] arm: zynqmp: add support for zcu106 and boot sources
2021-09-13 12:03 UTC (8+ messages)
` [PATCH 1/3] arm: zynqmp: add support for xilinx zcu106 board
` [PATCH 2/3] Documentation: boards: zynqmp: fix broken links
` [PATCH 3/3] arm: zynqmp: add boot source support
[PATCH master] base: driver: fix double removal of child devices
2021-09-13 10:18 UTC (3+ messages)
[PATCH master v2] base: driver: fix double removal of child devices
2021-09-13 10:17 UTC
[PATCH master] blspec: fix use-after-free of firmware search path
2021-09-13 8:29 UTC
[RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget
2021-09-10 18:27 UTC (5+ messages)
[PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget
2021-09-10 10:29 UTC
barebox environment early loading
2021-09-09 17:16 UTC (2+ messages)
[PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes
2021-09-09 12:09 UTC (7+ messages)
` [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
` [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection
` [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
` [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants
` [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe
` [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script
[PATCH v1 1/8] ARM: dts: skov-imx6: add USB nodes
2021-09-09 10:36 UTC (11+ messages)
` [PATCH v1 2/8] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
` [PATCH v1 3/8] ARM: boards: skov-imx6: add switch detection
` [PATCH v1 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
` [PATCH v1 5/8] ARM: boards: skov-imx6: fixup different DTS variants
` [PATCH v1 6/8] ARM: boards: skov-imx6: start using deep-probe
` [PATCH v1 7/8] ARM: boards: skov-imx6: set net.ifup_force_detect if no switch is detected
` [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters
[PATCH] video: Fix broken bcm2835 fb driver
2021-09-08 18:36 UTC (2+ messages)
[PATCH 0/2] usb: dwc2: fix phy dependecy
2021-09-08 12:58 UTC (5+ messages)
` [PATCH 1/2] usb: dwc2: Make having a phy optional
` [PATCH 1/2 v2] "
` [PATCH 2/2] ARM: rpi_defconfig: Enable PHY core for dwc2 usb driver
[PATCH] Documentation: Replace ENTRY_POINT with ENTRY_FUNCTION
2021-09-08 8:41 UTC (3+ messages)
` [PATCH] Documentation: Typo fix in command example
[PATCH] common: Select CRC32 dependency for DEFAULT_ENVIRONMENT
2021-09-07 12:45 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox