* [PATCH] ARM: i.MX7: don't hardcode UART1 in imx7_early_setup_uart_clock
@ 2022-10-10 7:48 Ahmad Fatoum
2022-10-12 12:32 ` Sascha Hauer
2022-10-27 18:35 ` Bruno Thomsen
0 siblings, 2 replies; 3+ messages in thread
From: Ahmad Fatoum @ 2022-10-10 7:48 UTC (permalink / raw)
To: barebox
Cc: Johannes Zink, Lars Pedersen, Bruno Thomsen, Andrey Smirnov,
Ahmad Fatoum
imx7_early_setup_uart_clock() has a very generic sounding name, but so
far only set up clocks for UART1. This can lead board code authors
astray that intend to user a different UART for DEBUG_LL.
This issue affects board code for kamstrup-mx7-concentrator, meerkat96
and zii-imx7d-dev, which use UART4, UART6 and UART2 respectively.
As I don't have this boards available to test and clock changes may have
adverse effect elsewhere, we have all existing users setup UART1 as
before, but note with a comment that this may not be the original
author's intention.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
I have CC'd authors of the three likely misconfigured boards,
in case they want to fix them and test.
---
arch/arm/boards/ac-sxb/lowlevel.c | 2 +-
.../boards/freescale-mx7-sabresd/lowlevel.c | 2 +-
.../kamstrup-mx7-concentrator/lowlevel.c | 3 ++-
arch/arm/boards/meerkat96/lowlevel.c | 3 ++-
arch/arm/boards/zii-imx7d-dev/lowlevel.c | 3 ++-
.../arm/mach-imx/include/mach/imx7-ccm-regs.h | 21 +++++++++----------
6 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boards/ac-sxb/lowlevel.c b/arch/arm/boards/ac-sxb/lowlevel.c
index a910555f9bd7..a26454968304 100644
--- a/arch/arm/boards/ac-sxb/lowlevel.c
+++ b/arch/arm/boards/ac-sxb/lowlevel.c
@@ -93,7 +93,7 @@ extern char __dtb_z_ac_sxb_start[];
static inline void setup_uart(void)
{
- imx7_early_setup_uart_clock();
+ imx7_early_setup_uart_clock(1);
imx7_setup_pad(MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX);
diff --git a/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c b/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
index a8733d62091f..6d393bf2b10e 100644
--- a/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
+++ b/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
@@ -17,7 +17,7 @@ extern char __dtb_imx7d_sdb_start[];
static inline void setup_uart(void)
{
- imx7_early_setup_uart_clock();
+ imx7_early_setup_uart_clock(1);
imx7_setup_pad(MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX);
diff --git a/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c b/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
index 4a9eae80d153..511f01757c46 100644
--- a/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
+++ b/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
@@ -17,7 +17,8 @@ extern char __dtb_z_imx7d_flex_concentrator_mfg_start[];
static inline void setup_uart(void)
{
- imx7_early_setup_uart_clock();
+ /* FIXME: Below UART4 is muxed, not UART1 */
+ imx7_early_setup_uart_clock(1);
imx7_setup_pad(MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX);
diff --git a/arch/arm/boards/meerkat96/lowlevel.c b/arch/arm/boards/meerkat96/lowlevel.c
index 1c9baeacfb2a..e65726ef1c27 100644
--- a/arch/arm/boards/meerkat96/lowlevel.c
+++ b/arch/arm/boards/meerkat96/lowlevel.c
@@ -14,7 +14,8 @@ extern char __dtb_z_imx7d_meerkat96_start[];
static void setup_uart(void)
{
- imx7_early_setup_uart_clock();
+ /* FIXME: Below UART6 is muxed, not UART1 */
+ imx7_early_setup_uart_clock(1);
imx7_setup_pad(MX7D_PAD_SD1_WP__UART6_DCE_TX);
imx7_uart_setup_ll();
putc_ll('>');
diff --git a/arch/arm/boards/zii-imx7d-dev/lowlevel.c b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
index 7579a2a8a050..0e316b602436 100644
--- a/arch/arm/boards/zii-imx7d-dev/lowlevel.c
+++ b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
@@ -23,7 +23,8 @@ extern char __dtb_z_imx7d_zii_rmu2_start[];
static inline void setup_uart(void)
{
- imx7_early_setup_uart_clock();
+ /* FIXME: Below UART2 is muxed, not UART1 */
+ imx7_early_setup_uart_clock(1);
imx7_setup_pad(MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX);
diff --git a/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h b/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
index aecf9a26d017..0ef0742bb65d 100644
--- a/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
@@ -39,16 +39,15 @@
#define IMX7_CCM_CCGR_SETTINGn_NEEDED_RUN_WAIT(n) IMX7_CCM_CCGR_SETTINGn(n, 0b10)
#define IMX7_CCM_CCGR_SETTINGn_NEEDED(n) IMX7_CCM_CCGR_SETTINGn(n, 0b11)
-static inline void imx7_early_setup_uart_clock(void)
-{
- void __iomem *ccm = IOMEM(MX7_CCM_BASE_ADDR);
-
- writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0),
- ccm + IMX7_CCM_CCGRn_CLR(IMX7_CCM_CCGR_UART1));
- writel(IMX7_CCM_TARGET_ROOTn_ENABLE | IMX7_UART1_CLK_ROOT__OSC_24M,
- ccm + IMX7_CCM_TARGET_ROOTn(IMX7_UART1_CLK_ROOT));
- writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0),
- ccm + IMX7_CCM_CCGRn_SET(IMX7_CCM_CCGR_UART1));
-}
+/* UART counting starts for 1, like in the datasheet/dt-bindings */
+#define imx7_early_setup_uart_clock(uart) do { \
+ void __iomem *ccm = IOMEM(MX7_CCM_BASE_ADDR); \
+ writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0), \
+ ccm + IMX7_CCM_CCGRn_CLR(IMX7_CCM_CCGR_UART ## uart)); \
+ writel(IMX7_CCM_TARGET_ROOTn_ENABLE | IMX7_UART ## uart ## _CLK_ROOT__OSC_24M, \
+ ccm + IMX7_CCM_TARGET_ROOTn(IMX7_UART ## uart ## _CLK_ROOT)); \
+ writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0), \
+ ccm + IMX7_CCM_CCGRn_SET(IMX7_CCM_CCGR_UART ## uart)); \
+} while (0)
#endif
--
2.30.2
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: i.MX7: don't hardcode UART1 in imx7_early_setup_uart_clock
2022-10-10 7:48 [PATCH] ARM: i.MX7: don't hardcode UART1 in imx7_early_setup_uart_clock Ahmad Fatoum
@ 2022-10-12 12:32 ` Sascha Hauer
2022-10-27 18:35 ` Bruno Thomsen
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2022-10-12 12:32 UTC (permalink / raw)
To: Ahmad Fatoum
Cc: barebox, Johannes Zink, Lars Pedersen, Bruno Thomsen, Andrey Smirnov
On Mon, Oct 10, 2022 at 09:48:34AM +0200, Ahmad Fatoum wrote:
> imx7_early_setup_uart_clock() has a very generic sounding name, but so
> far only set up clocks for UART1. This can lead board code authors
> astray that intend to user a different UART for DEBUG_LL.
>
> This issue affects board code for kamstrup-mx7-concentrator, meerkat96
> and zii-imx7d-dev, which use UART4, UART6 and UART2 respectively.
>
> As I don't have this boards available to test and clock changes may have
> adverse effect elsewhere, we have all existing users setup UART1 as
> before, but note with a comment that this may not be the original
> author's intention.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> I have CC'd authors of the three likely misconfigured boards,
> in case they want to fix them and test.
> ---
> arch/arm/boards/ac-sxb/lowlevel.c | 2 +-
> .../boards/freescale-mx7-sabresd/lowlevel.c | 2 +-
> .../kamstrup-mx7-concentrator/lowlevel.c | 3 ++-
> arch/arm/boards/meerkat96/lowlevel.c | 3 ++-
> arch/arm/boards/zii-imx7d-dev/lowlevel.c | 3 ++-
> .../arm/mach-imx/include/mach/imx7-ccm-regs.h | 21 +++++++++----------
> 6 files changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/boards/ac-sxb/lowlevel.c b/arch/arm/boards/ac-sxb/lowlevel.c
> index a910555f9bd7..a26454968304 100644
> --- a/arch/arm/boards/ac-sxb/lowlevel.c
> +++ b/arch/arm/boards/ac-sxb/lowlevel.c
> @@ -93,7 +93,7 @@ extern char __dtb_z_ac_sxb_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX);
>
> diff --git a/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c b/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
> index a8733d62091f..6d393bf2b10e 100644
> --- a/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
> @@ -17,7 +17,7 @@ extern char __dtb_imx7d_sdb_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX);
>
> diff --git a/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c b/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
> index 4a9eae80d153..511f01757c46 100644
> --- a/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
> +++ b/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
> @@ -17,7 +17,8 @@ extern char __dtb_z_imx7d_flex_concentrator_mfg_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + /* FIXME: Below UART4 is muxed, not UART1 */
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX);
>
> diff --git a/arch/arm/boards/meerkat96/lowlevel.c b/arch/arm/boards/meerkat96/lowlevel.c
> index 1c9baeacfb2a..e65726ef1c27 100644
> --- a/arch/arm/boards/meerkat96/lowlevel.c
> +++ b/arch/arm/boards/meerkat96/lowlevel.c
> @@ -14,7 +14,8 @@ extern char __dtb_z_imx7d_meerkat96_start[];
>
> static void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + /* FIXME: Below UART6 is muxed, not UART1 */
> + imx7_early_setup_uart_clock(1);
> imx7_setup_pad(MX7D_PAD_SD1_WP__UART6_DCE_TX);
> imx7_uart_setup_ll();
> putc_ll('>');
> diff --git a/arch/arm/boards/zii-imx7d-dev/lowlevel.c b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
> index 7579a2a8a050..0e316b602436 100644
> --- a/arch/arm/boards/zii-imx7d-dev/lowlevel.c
> +++ b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
> @@ -23,7 +23,8 @@ extern char __dtb_z_imx7d_zii_rmu2_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + /* FIXME: Below UART2 is muxed, not UART1 */
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX);
>
> diff --git a/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h b/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
> index aecf9a26d017..0ef0742bb65d 100644
> --- a/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
> +++ b/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
> @@ -39,16 +39,15 @@
> #define IMX7_CCM_CCGR_SETTINGn_NEEDED_RUN_WAIT(n) IMX7_CCM_CCGR_SETTINGn(n, 0b10)
> #define IMX7_CCM_CCGR_SETTINGn_NEEDED(n) IMX7_CCM_CCGR_SETTINGn(n, 0b11)
>
> -static inline void imx7_early_setup_uart_clock(void)
> -{
> - void __iomem *ccm = IOMEM(MX7_CCM_BASE_ADDR);
> -
> - writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0),
> - ccm + IMX7_CCM_CCGRn_CLR(IMX7_CCM_CCGR_UART1));
> - writel(IMX7_CCM_TARGET_ROOTn_ENABLE | IMX7_UART1_CLK_ROOT__OSC_24M,
> - ccm + IMX7_CCM_TARGET_ROOTn(IMX7_UART1_CLK_ROOT));
> - writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0),
> - ccm + IMX7_CCM_CCGRn_SET(IMX7_CCM_CCGR_UART1));
> -}
> +/* UART counting starts for 1, like in the datasheet/dt-bindings */
> +#define imx7_early_setup_uart_clock(uart) do { \
> + void __iomem *ccm = IOMEM(MX7_CCM_BASE_ADDR); \
> + writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0), \
> + ccm + IMX7_CCM_CCGRn_CLR(IMX7_CCM_CCGR_UART ## uart)); \
You could do:
#define IMX7_CCM_CCGR_UART(n) (148 + (n)) /* 0 <= n <= 5 */
#define IMX7_UART_CLK_ROOT(n) (0xaf80 + (n) * 0x80) /* 0 <= n <= 5 */
to avoid converting this into a macro.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: i.MX7: don't hardcode UART1 in imx7_early_setup_uart_clock
2022-10-10 7:48 [PATCH] ARM: i.MX7: don't hardcode UART1 in imx7_early_setup_uart_clock Ahmad Fatoum
2022-10-12 12:32 ` Sascha Hauer
@ 2022-10-27 18:35 ` Bruno Thomsen
1 sibling, 0 replies; 3+ messages in thread
From: Bruno Thomsen @ 2022-10-27 18:35 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox, Johannes Zink, Lars Pedersen, Andrey Smirnov
Hi Ahmad,
Den man. 10. okt. 2022 kl. 09.48 skrev Ahmad Fatoum <a.fatoum@pengutronix.de>:
>
> imx7_early_setup_uart_clock() has a very generic sounding name, but so
> far only set up clocks for UART1. This can lead board code authors
> astray that intend to user a different UART for DEBUG_LL.
>
> This issue affects board code for kamstrup-mx7-concentrator, meerkat96
> and zii-imx7d-dev, which use UART4, UART6 and UART2 respectively.
>
> As I don't have this boards available to test and clock changes may have
> adverse effect elsewhere, we have all existing users setup UART1 as
> before, but note with a comment that this may not be the original
> author's intention.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> I have CC'd authors of the three likely misconfigured boards,
> in case they want to fix them and test.
> ---
> arch/arm/boards/ac-sxb/lowlevel.c | 2 +-
> .../boards/freescale-mx7-sabresd/lowlevel.c | 2 +-
> .../kamstrup-mx7-concentrator/lowlevel.c | 3 ++-
> arch/arm/boards/meerkat96/lowlevel.c | 3 ++-
> arch/arm/boards/zii-imx7d-dev/lowlevel.c | 3 ++-
> .../arm/mach-imx/include/mach/imx7-ccm-regs.h | 21 +++++++++----------
> 6 files changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/boards/ac-sxb/lowlevel.c b/arch/arm/boards/ac-sxb/lowlevel.c
> index a910555f9bd7..a26454968304 100644
> --- a/arch/arm/boards/ac-sxb/lowlevel.c
> +++ b/arch/arm/boards/ac-sxb/lowlevel.c
> @@ -93,7 +93,7 @@ extern char __dtb_z_ac_sxb_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX);
>
> diff --git a/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c b/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
> index a8733d62091f..6d393bf2b10e 100644
> --- a/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
> @@ -17,7 +17,7 @@ extern char __dtb_imx7d_sdb_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX);
>
> diff --git a/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c b/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
> index 4a9eae80d153..511f01757c46 100644
> --- a/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
> +++ b/arch/arm/boards/kamstrup-mx7-concentrator/lowlevel.c
> @@ -17,7 +17,8 @@ extern char __dtb_z_imx7d_flex_concentrator_mfg_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + /* FIXME: Below UART4 is muxed, not UART1 */
> + imx7_early_setup_uart_clock(1);
>
You are right, this should setup UART4 and not UART1.
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
> imx7_setup_pad(MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX);
>
> diff --git a/arch/arm/boards/meerkat96/lowlevel.c b/arch/arm/boards/meerkat96/lowlevel.c
> index 1c9baeacfb2a..e65726ef1c27 100644
> --- a/arch/arm/boards/meerkat96/lowlevel.c
> +++ b/arch/arm/boards/meerkat96/lowlevel.c
> @@ -14,7 +14,8 @@ extern char __dtb_z_imx7d_meerkat96_start[];
>
> static void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + /* FIXME: Below UART6 is muxed, not UART1 */
> + imx7_early_setup_uart_clock(1);
> imx7_setup_pad(MX7D_PAD_SD1_WP__UART6_DCE_TX);
> imx7_uart_setup_ll();
> putc_ll('>');
> diff --git a/arch/arm/boards/zii-imx7d-dev/lowlevel.c b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
> index 7579a2a8a050..0e316b602436 100644
> --- a/arch/arm/boards/zii-imx7d-dev/lowlevel.c
> +++ b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
> @@ -23,7 +23,8 @@ extern char __dtb_z_imx7d_zii_rmu2_start[];
>
> static inline void setup_uart(void)
> {
> - imx7_early_setup_uart_clock();
> + /* FIXME: Below UART2 is muxed, not UART1 */
> + imx7_early_setup_uart_clock(1);
>
> imx7_setup_pad(MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX);
>
> diff --git a/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h b/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
> index aecf9a26d017..0ef0742bb65d 100644
> --- a/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
> +++ b/arch/arm/mach-imx/include/mach/imx7-ccm-regs.h
> @@ -39,16 +39,15 @@
> #define IMX7_CCM_CCGR_SETTINGn_NEEDED_RUN_WAIT(n) IMX7_CCM_CCGR_SETTINGn(n, 0b10)
> #define IMX7_CCM_CCGR_SETTINGn_NEEDED(n) IMX7_CCM_CCGR_SETTINGn(n, 0b11)
>
> -static inline void imx7_early_setup_uart_clock(void)
> -{
> - void __iomem *ccm = IOMEM(MX7_CCM_BASE_ADDR);
> -
> - writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0),
> - ccm + IMX7_CCM_CCGRn_CLR(IMX7_CCM_CCGR_UART1));
> - writel(IMX7_CCM_TARGET_ROOTn_ENABLE | IMX7_UART1_CLK_ROOT__OSC_24M,
> - ccm + IMX7_CCM_TARGET_ROOTn(IMX7_UART1_CLK_ROOT));
> - writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0),
> - ccm + IMX7_CCM_CCGRn_SET(IMX7_CCM_CCGR_UART1));
> -}
> +/* UART counting starts for 1, like in the datasheet/dt-bindings */
> +#define imx7_early_setup_uart_clock(uart) do { \
> + void __iomem *ccm = IOMEM(MX7_CCM_BASE_ADDR); \
> + writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0), \
> + ccm + IMX7_CCM_CCGRn_CLR(IMX7_CCM_CCGR_UART ## uart)); \
> + writel(IMX7_CCM_TARGET_ROOTn_ENABLE | IMX7_UART ## uart ## _CLK_ROOT__OSC_24M, \
> + ccm + IMX7_CCM_TARGET_ROOTn(IMX7_UART ## uart ## _CLK_ROOT)); \
> + writel(IMX7_CCM_CCGR_SETTINGn_NEEDED(0), \
> + ccm + IMX7_CCM_CCGRn_SET(IMX7_CCM_CCGR_UART ## uart)); \
> +} while (0)
>
> #endif
> --
> 2.30.2
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-10-27 18:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-10 7:48 [PATCH] ARM: i.MX7: don't hardcode UART1 in imx7_early_setup_uart_clock Ahmad Fatoum
2022-10-12 12:32 ` Sascha Hauer
2022-10-27 18:35 ` Bruno Thomsen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox