mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
Date: Wed, 17 Jul 2019 19:06:02 +0200	[thread overview]
Message-ID: <20190717170604.23732-5-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20190717170604.23732-1-a.fatoum@pengutronix.de>

From: Philipp Zabel <p.zabel@pengutronix.de>

Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
enter the ldb_di_ipu_div divider. If the divider gets locked up, no
ldb_di[x]_clk is generated, and the LVDS display will hang when the
ipu_di_clk is sourced from ldb_di_clk.

To fix the problem, both the new and current parent of the ldb_di_clk
should be disabled before the switch. As this can not be guaranteed by
the clock framework during runtime, make the ldb_di[x]_sel muxes read-only.
A workaround to set the muxes once during boot could be added to the
kernel or bootloader.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
[afa: reviewed for barebox]
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[afa: ported from Linux kernel commit 03d576f202]
[afa: added exception for i.MX6QP, see kernel commit f4a0a6c309]
[afa: added cpu_has_err009219 helper function]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/clk/imx/clk-imx6.c | 17 +++++++++++++++--
 drivers/clk/imx/clk.h      |  8 ++++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
index 6f19535be7ba..61819ff9744d 100644
--- a/drivers/clk/imx/clk-imx6.c
+++ b/drivers/clk/imx/clk-imx6.c
@@ -64,6 +64,13 @@ static inline int cpu_mx6_is_plus(void)
 	return cpu_mx6_is_mx6qp() || cpu_mx6_is_mx6dp();
 }
 
+/* i.MX6 Quad/Dual/DualLite/Solo are all affected */
+static inline int cpu_mx6_has_err009219(void)
+{
+	return cpu_mx6_is_mx6d() || cpu_mx6_is_mx6q() ||
+		cpu_mx6_is_mx6dl() || cpu_mx6_is_mx6s();
+}
+
 static const char *step_sels[] = {
 	"osc",
 	"pll2_pfd2_396m",
@@ -316,8 +323,14 @@ static void imx6_add_video_clks(void __iomem *anab, void __iomem *cb)
 
 	imx6q_mmdc_ch1_mask_handshake(cb);
 
-	clks[IMX6QDL_CLK_LDB_DI0_SEL]      = imx_clk_mux_p("ldb_di0_sel",      cb + 0x2c, 9,  3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
-	clks[IMX6QDL_CLK_LDB_DI1_SEL]      = imx_clk_mux_p("ldb_di1_sel",      cb + 0x2c, 12, 3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	if (cpu_mx6_has_err009219()) {
+		clks[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_ldb("ldb_di0_sel",    cb + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels));
+		clks[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_ldb("ldb_di1_sel",    cb + 0x2c, 12, 3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	} else {
+		clks[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_p("ldb_di0_sel",    cb + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels));
+		clks[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_p("ldb_di1_sel",    cb + 0x2c, 12, 3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	}
+
 	clks[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_p("ipu1_di0_pre_sel", cb + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
 	clks[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_p("ipu1_di1_pre_sel", cb + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
 	clks[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_p("ipu2_di0_pre_sel", cb + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 875c76a8b3e4..04286f03f727 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -39,6 +39,14 @@ static inline struct clk *imx_clk_divider_table(const char *name,
 				 width, table, 0);
 }
 
+static inline struct clk *imx_clk_mux_ldb(const char *name, void __iomem *reg,
+		u8 shift, u8 width, const char **parents, int num_parents)
+{
+	return clk_mux(name, CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT, reg,
+		       shift, width, parents, num_parents, CLK_MUX_READ_ONLY);
+}
+
+
 static inline struct clk *imx_clk_fixed_factor(const char *name,
 		const char *parent, unsigned int mult, unsigned int div)
 {
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-07-17 17:06 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17 17:05 [PATCH v3 0/6] clk: imx6: work around LDB hang caused by ERR009219 Ahmad Fatoum
2019-07-17 17:05 ` [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized Ahmad Fatoum
2019-07-17 17:10   ` Ahmad Fatoum
2019-07-18 15:51     ` Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 2/6] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 3/6] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div) Ahmad Fatoum
2019-07-17 17:06 ` Ahmad Fatoum [this message]
2019-07-18  8:19   ` [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only Roland Hieber
2019-07-18  8:25     ` Ahmad Fatoum
2019-07-18  8:33       ` Roland Hieber
2019-08-05 10:22       ` Sascha Hauer
2019-07-17 17:06 ` [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK Ahmad Fatoum
2019-09-10 13:15   ` Sascha Hauer
2019-09-10 14:07     ` Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 6/6] clk: imx6: define an enum for ldb mux inputs Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190717170604.23732-5-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox