mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: Re: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
Date: Thu, 18 Jul 2019 17:51:17 +0200	[thread overview]
Message-ID: <35ab3296-66e8-54cf-60fb-bd7c8d19a694@pengutronix.de> (raw)
In-Reply-To: <300da74e-fa20-f762-0203-e9351089b636@pengutronix.de>

On 17/7/19 19:10, Ahmad Fatoum wrote:
> On 17/7/19 19:05, Ahmad Fatoum wrote:
>> The cpu_is_mx6* macros rely on __imx_cpu_type, which is initialized
>> dependent on device tree compatible at "postcore" init-level imx_init.
>>
>> The imx6q-ccm driver, which uses the cpu_is_mx6* macros, is registered
>> at "core" init-level, however. This results on the macro always returning
>> false.
>>
>> Fix this by using the cpu_mx6_is_mx6* family of macros instead.
>> These already require that that CPU is a MX6, which is safe because the
>> the driver only matches against "fsl,imx6q-ccm".
>>
>> Only exception is the video5 pll reparenting. Here we will just
>> maintain the old behavior as we will drop the if clause in a following
>> commit anyway.
>>
>> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> 
> While it's clearly the right thing to do, I have no affected boards
> (Dual or Plus) sitting on my desk, so the change is untested.

s/Dual/DualLite/ (or Solo).

> 
> A Tested-by would be appreciated, thanks!
> 
>> ---
>>  drivers/clk/imx/clk-imx6.c | 11 +++++------
>>  1 file changed, 5 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
>> index 35b995dae24e..0b71a1322466 100644
>> --- a/drivers/clk/imx/clk-imx6.c
>> +++ b/drivers/clk/imx/clk-imx6.c
>> @@ -59,9 +59,9 @@
>>  static struct clk *clks[IMX6QDL_CLK_END];
>>  static struct clk_onecell_data clk_data;
>>  
>> -static inline int cpu_is_plus(void)
>> +static inline int cpu_mx6_is_plus(void)
>>  {
>> -	return cpu_is_mx6qp() || cpu_is_mx6dp();
>> +	return cpu_mx6_is_mx6qp() || cpu_mx6_is_mx6dp();
>>  }
>>  
>>  static const char *step_sels[] = {
>> @@ -341,8 +341,7 @@ static void imx6_add_video_clks(void __iomem *anab, void __iomem *cb)
>>  	clk_set_parent(clks[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>>  	clk_set_parent(clks[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>>  
>> -	if ((imx_silicon_revision() != IMX_CHIP_REV_1_0) ||
>> -	    cpu_is_mx6dl()) {
>> +	if (imx_silicon_revision() != IMX_CHIP_REV_1_0) {
>>  		clk_set_parent(clks[IMX6QDL_CLK_LDB_DI0_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>>  		clk_set_parent(clks[IMX6QDL_CLK_LDB_DI1_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>>  	}
>> @@ -418,7 +417,7 @@ static int imx6_ccm_probe(struct device_d *dev)
>>  	clks[IMX6QDL_CLK_USDHC2_SEL]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
>>  	clks[IMX6QDL_CLK_USDHC3_SEL]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
>>  	clks[IMX6QDL_CLK_USDHC4_SEL]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
>> -	if (cpu_is_plus())
>> +	if (cpu_mx6_is_plus())
>>  		clks[IMX6QDL_CLK_ENFC_SEL]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels_plus,    ARRAY_SIZE(enfc_sels_plus));
>>  	else
>>  		clks[IMX6QDL_CLK_ENFC_SEL]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
>> @@ -469,7 +468,7 @@ static int imx6_ccm_probe(struct device_d *dev)
>>  	clks[IMX6QDL_CLK_ECSPI2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
>>  	clks[IMX6QDL_CLK_ECSPI3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
>>  	clks[IMX6QDL_CLK_ECSPI4]       = imx_clk_gate2("ecspi4",        "ecspi_root",        base + 0x6c, 6);
>> -	if (cpu_is_mx6dl())
>> +	if (cpu_mx6_is_mx6dl())
>>  		clks[IMX6DL_CLK_I2C4]  = imx_clk_gate2("i2c4",          "ipg_per",           base + 0x6c, 8);
>>  	else
>>  		clks[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
>>
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-07-18 15:51 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17 17:05 [PATCH v3 0/6] clk: imx6: work around LDB hang caused by ERR009219 Ahmad Fatoum
2019-07-17 17:05 ` [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized Ahmad Fatoum
2019-07-17 17:10   ` Ahmad Fatoum
2019-07-18 15:51     ` Ahmad Fatoum [this message]
2019-07-17 17:06 ` [PATCH v3 2/6] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 3/6] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div) Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only Ahmad Fatoum
2019-07-18  8:19   ` Roland Hieber
2019-07-18  8:25     ` Ahmad Fatoum
2019-07-18  8:33       ` Roland Hieber
2019-08-05 10:22       ` Sascha Hauer
2019-07-17 17:06 ` [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK Ahmad Fatoum
2019-09-10 13:15   ` Sascha Hauer
2019-09-10 14:07     ` Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 6/6] clk: imx6: define an enum for ldb mux inputs Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=35ab3296-66e8-54cf-60fb-bd7c8d19a694@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox