From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v3 04/10] serial: add litex UART driver
Date: Tue, 25 May 2021 10:19:46 +0300 [thread overview]
Message-ID: <20210525071952.18045-5-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20210525071952.18045-1-antonynpavlov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
drivers/serial/Makefile | 1 +
drivers/serial/serial_litex.c | 96 +++++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5120b17376..45055371ea 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_DRIVER_SERIAL_DIGIC) += serial_digic.o
obj-$(CONFIG_DRIVER_SERIAL_LPUART) += serial_lpuart.o
obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
obj-$(CONFIG_SERIAL_SIFIVE) += serial_sifive.o
+obj-$(CONFIG_SOC_LITEX) += serial_litex.o
diff --git a/drivers/serial/serial_litex.c b/drivers/serial/serial_litex.c
new file mode 100644
index 0000000000..8562a45ecc
--- /dev/null
+++ b/drivers/serial/serial_litex.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+
+#define UART_RXTX 0x00
+#define UART_TXFULL 0x04
+#define UART_RXEMPTY 0x08
+#define UART_EV_PENDING 0x10
+#define UART_EV_RX (1 << 1)
+
+static inline uint32_t litex_serial_readb(struct console_device *cdev,
+ uint32_t offset)
+{
+ void __iomem *base = cdev->dev->priv;
+
+ return readb(base + offset);
+}
+
+static inline void litex_serial_writeb(struct console_device *cdev,
+ uint32_t value, uint32_t offset)
+{
+ void __iomem *base = cdev->dev->priv;
+
+ writeb(value, base + offset);
+}
+
+static void litex_serial_putc(struct console_device *cdev, char c)
+{
+ while (litex_serial_readb(cdev, UART_TXFULL))
+ ;
+
+ litex_serial_writeb(cdev, c, UART_RXTX);
+}
+
+static int litex_serial_getc(struct console_device *cdev)
+{
+ int c;
+
+ while (litex_serial_readb(cdev, UART_RXEMPTY))
+ ;
+
+ c = litex_serial_readb(cdev, UART_RXTX);
+
+ /* refresh UART_RXEMPTY by writing UART_EV_RX to UART_EV_PENDING */
+ litex_serial_writeb(cdev, UART_EV_RX, UART_EV_PENDING);
+
+ return c;
+}
+
+static int litex_serial_tstc(struct console_device *cdev)
+{
+ return !litex_serial_readb(cdev, UART_RXEMPTY);
+}
+
+static int litex_serial_probe(struct device_d *dev)
+{
+ struct resource *iores;
+ struct console_device *cdev;
+
+ cdev = xzalloc(sizeof(struct console_device));
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+
+ dev->priv = IOMEM(iores->start);
+ cdev->dev = dev;
+ cdev->tstc = &litex_serial_tstc;
+ cdev->putc = &litex_serial_putc;
+ cdev->getc = &litex_serial_getc;
+ cdev->setbrg = NULL;
+
+ console_register(cdev);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id litex_serial_dt_ids[] = {
+ {
+ .compatible = "litex,uart",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d litex_serial_driver = {
+ .name = "litex-uart",
+ .probe = litex_serial_probe,
+ .of_compatible = DRV_OF_COMPAT(litex_serial_dt_ids),
+};
+console_platform_driver(litex_serial_driver);
--
2.31.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-05-25 7:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-25 7:19 [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
2021-05-25 7:19 ` [PATCH v3 01/10] clocksource: timer-riscv: select CSR from device tree Antony Pavlov
2021-05-25 12:54 ` Ahmad Fatoum
2021-05-25 7:19 ` [PATCH v3 02/10] RISC-V: make it possible to run nmon from PBL C code Antony Pavlov
2021-05-25 7:19 ` [PATCH v3 03/10] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-25 7:19 ` Antony Pavlov [this message]
2021-05-25 7:19 ` [PATCH v3 05/10] litex serial: add setbrg callback Antony Pavlov
2021-05-25 7:36 ` Antony Pavlov
2021-05-25 12:48 ` Ahmad Fatoum
2021-05-25 7:19 ` [PATCH v3 06/10] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-25 7:19 ` [PATCH v3 07/10] spi: add litex spiflash driver Antony Pavlov
2021-05-25 7:19 ` [PATCH v3 08/10] net: add LiteEth driver Antony Pavlov
2021-05-25 7:19 ` [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support Antony Pavlov
2021-05-25 7:47 ` Jan Lübbe
2021-05-25 8:52 ` Antony Pavlov
2021-05-25 7:19 ` [PATCH v3 10/10] RISC-V: add litex_linux_defconfig Antony Pavlov
2021-08-11 8:52 ` [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon Ahmad Fatoum
2021-08-17 10:16 ` Antony Pavlov
2021-08-17 10:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210525071952.18045-5-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox