mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>, barebox@lists.infradead.org
Subject: Re: [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon
Date: Wed, 11 Aug 2021 10:52:53 +0200	[thread overview]
Message-ID: <32db3d61-f04c-5940-600c-fb2435808beb@pengutronix.de> (raw)
In-Reply-To: <20210525071952.18045-1-antonynpavlov@gmail.com>

Hello Antony,

On 25.05.21 09:19, Antony Pavlov wrote:
> Changes since v2:
> 
>   * rebase on top of master branch (f873c7ff2497) +
>     "RISC-V: extend multi-image to support both S- and M-Mode"
>     (http://lists.infradead.org/pipermail/barebox/2021-May/036086.html).
>   * "litex serial: add setbrg callback" patch by Marek Czerski is added
>     for review;
>   * fix "clocksource: timer-riscv: select CSR from device tree" patch;
>   * change gpio IP-block base addresses in litex dts;
>   * gpio-74xx-mmio uses device_get_match_data() now.
> 
> Changes since v1:
> 
>   * rebased on top of next branch;
>   * new patches are introduced:
>     * clocksource: timer-riscv: select CSR from device tree
>     * RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
>     * RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
>   * almost all of Ahmad's notes are fixed (e.g. unused header files inclusions are dropped);
>   * NOT FIXED: gpio-74xx-mmio still uses dev_get_drvdata(), not device_get_match_data()
> 
> Antony Pavlov (9):
>   clocksource: timer-riscv: select CSR from device tree
>   RISC-V: make it possible to run nmon from PBL C code
>   RISC-V: boards: erizo: make it possible to use nmon
>   serial: add litex UART driver
>   gpio: add driver for 74xx-ICs with MMIO access
>   spi: add litex spiflash driver
>   net: add LiteEth driver
>   RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
>   RISC-V: add litex_linux_defconfig
> 
> Marek Czerski (1):
>   litex serial: add setbrg callback

I'd like to give this a try eventually while following:
https://github.com/enjoy-digital/litex/wiki/Use-LiteX-on-the-Acorn-CLE-215

Do you intend to submit a new revision soon? Is it ok for you if I respin
this series?

Cheers,
Ahmad

>  arch/riscv/Kconfig.socs                  |  14 +
>  arch/riscv/boards/Makefile               |   1 +
>  arch/riscv/boards/erizo/lowlevel.c       |   4 +
>  arch/riscv/boards/litex-linux/Makefile   |   3 +
>  arch/riscv/boards/litex-linux/lowlevel.c |  22 ++
>  arch/riscv/boot/Makefile                 |   1 +
>  arch/riscv/boot/nmon_entry.S             |  13 +
>  arch/riscv/configs/litex_linux_defconfig |  76 +++++
>  arch/riscv/dts/Makefile                  |   1 +
>  arch/riscv/dts/erizo.dtsi                |   2 +
>  arch/riscv/dts/litex-linux.dts           |  92 ++++++
>  arch/riscv/dts/litex_soc_linux.dtsi      |  49 +++
>  arch/riscv/include/asm/debug_ll.h        |   3 +
>  arch/riscv/include/asm/debug_ll_litex.h  | 123 ++++++++
>  arch/riscv/include/asm/riscv_nmon.h      |  49 ++-
>  common/Kconfig                           |   4 +
>  drivers/clocksource/timer-riscv.c        |  24 +-
>  drivers/gpio/Kconfig                     |  14 +
>  drivers/gpio/Makefile                    |   1 +
>  drivers/gpio/gpio-74xx-mmio.c            | 165 ++++++++++
>  drivers/net/Kconfig                      |   8 +
>  drivers/net/Makefile                     |   1 +
>  drivers/net/liteeth.c                    | 376 +++++++++++++++++++++++
>  drivers/serial/Makefile                  |   1 +
>  drivers/serial/serial_litex.c            | 103 +++++++
>  drivers/spi/Kconfig                      |   3 +
>  drivers/spi/Makefile                     |   1 +
>  drivers/spi/litex_spiflash.c             | 241 +++++++++++++++
>  images/Makefile.riscv                    |   4 +
>  29 files changed, 1370 insertions(+), 29 deletions(-)
>  create mode 100644 arch/riscv/boards/litex-linux/Makefile
>  create mode 100644 arch/riscv/boards/litex-linux/lowlevel.c
>  create mode 100644 arch/riscv/boot/nmon_entry.S
>  create mode 100644 arch/riscv/configs/litex_linux_defconfig
>  create mode 100644 arch/riscv/dts/litex-linux.dts
>  create mode 100644 arch/riscv/dts/litex_soc_linux.dtsi
>  create mode 100644 arch/riscv/include/asm/debug_ll_litex.h
>  create mode 100644 drivers/gpio/gpio-74xx-mmio.c
>  create mode 100644 drivers/net/liteeth.c
>  create mode 100644 drivers/serial/serial_litex.c
>  create mode 100644 drivers/spi/litex_spiflash.c
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2021-08-11  9:26 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-25  7:19 Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 01/10] clocksource: timer-riscv: select CSR from device tree Antony Pavlov
2021-05-25 12:54   ` Ahmad Fatoum
2021-05-25  7:19 ` [PATCH v3 02/10] RISC-V: make it possible to run nmon from PBL C code Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 03/10] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 04/10] serial: add litex UART driver Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 05/10] litex serial: add setbrg callback Antony Pavlov
2021-05-25  7:36   ` Antony Pavlov
2021-05-25 12:48     ` Ahmad Fatoum
2021-05-25  7:19 ` [PATCH v3 06/10] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 07/10] spi: add litex spiflash driver Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 08/10] net: add LiteEth driver Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support Antony Pavlov
2021-05-25  7:47   ` Jan Lübbe
2021-05-25  8:52     ` Antony Pavlov
2021-05-25  7:19 ` [PATCH v3 10/10] RISC-V: add litex_linux_defconfig Antony Pavlov
2021-08-11  8:52 ` Ahmad Fatoum [this message]
2021-08-17 10:16   ` [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
2021-08-17 10:20     ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=32db3d61-f04c-5940-600c-fb2435808beb@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox