* [PATCH 0/7] ZynqMP: Cleanup and extend board support
@ 2021-06-24 10:23 Michael Tretter
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
` (6 more replies)
0 siblings, 7 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
Hello,
There were still a few things missing for real support for the ZynqMP ZCU104
in Barebox.
This series adds support for reset source detection, Barebox environment,
barebox_update and soft reset (via PSCI) for the ZynqMP ZCU104 board. It
extends the zynqmp_defconfig to enable more features that you would probably
want by default on a ZynqMP board. I also added some introductory information
how to build and use Barebox on the ZynqMP.
Michael
Michael Tretter (7):
ARM: zynqmp: set reset source
clk: zynqmp: do not enable already enabled clocks
dts: zcu104: add Barebox environment
ARM: zynqmp: add update handler
ARM: zynqmp: zcu104: register update handler
ARM: zynqmp: defconfig: enable more features
Documentation: zynqmp: add some documentation
Documentation/boards/zynqmp.rst | 40 ++++++++++
arch/arm/boards/xilinx-zcu104/Makefile | 1 +
arch/arm/boards/xilinx-zcu104/board.c | 18 +++++
arch/arm/configs/zynqmp_defconfig | 23 ++++++
arch/arm/dts/zynqmp-zcu104-revA.dts | 10 +++
arch/arm/mach-zynqmp/Makefile | 2 +
.../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++
arch/arm/mach-zynqmp/include/mach/zynqmp.h | 6 ++
arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 ++++++++++++
arch/arm/mach-zynqmp/zynqmp.c | 74 +++++++++++++++++++
drivers/clk/zynqmp/clk-gate-zynqmp.c | 3 +
11 files changed, 246 insertions(+)
create mode 100644 Documentation/boards/zynqmp.rst
create mode 100644 arch/arm/boards/xilinx-zcu104/board.c
create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/7] ARM: zynqmp: set reset source
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
2021-06-24 10:48 ` Ahmad Fatoum
2021-06-24 10:23 ` [PATCH 2/7] clk: zynqmp: do not enable already enabled clocks Michael Tretter
` (5 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
The reset reason is available in the APB register set on the ZynqMP.
Read the reset reason and set the reset source accordingly.
There might be multiple bits set in the APB register. Use the MSB for
determining the actual reset source.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/mach-zynqmp/Makefile | 1 +
arch/arm/mach-zynqmp/include/mach/zynqmp.h | 6 ++
arch/arm/mach-zynqmp/zynqmp.c | 74 ++++++++++++++++++++++
3 files changed, 81 insertions(+)
create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index 021efc94afaf..14b8a4e46b87 100644
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-or-later
obj-y += firmware-zynqmp.o
+obj-y += zynqmp.o
diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp.h b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
new file mode 100644
index 000000000000..f6c05f35a470
--- /dev/null
+++ b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_ZYNQMP_H
+#define __MACH_ZYNQMP_H
+
+int zynqmp_soc_revision(void);
+
+#endif /* __MACH_ZYNQMP_H */
diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
new file mode 100644
index 000000000000..2b3bd8406ce9
--- /dev/null
+++ b/arch/arm/mach-zynqmp/zynqmp.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/types.h>
+#include <reset_source.h>
+
+#include <mach/zynqmp.h>
+
+#define ZYNQMP_CRL_APB_BASE 0xff5e0000
+#define ZYNQMP_CRL_APB_RESET_REASON (ZYNQMP_CRL_APB_BASE + 0x220)
+
+/* External POR: The PS_POR_B reset signal pin was asserted. */
+#define ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL BIT(0)
+/* Internal POR: A system error triggered a POR reset. */
+#define ZYNQMP_CRL_APB_RESET_REASON_INTERNAL BIT(1)
+/* Internal system reset; A system error triggered a system reset. */
+#define ZYNQMP_CRL_APB_RESET_REASON_PMU BIT(2)
+/* PS-only reset: Write to PMU_GLOBAL.GLOBAL_RESET [PS_ONLY_RST]. */
+#define ZYNQMP_CRL_APB_RESET_REASON_PSONLY BIT(3)
+/* External system reset: The PS_SRST_B reset signal pin was asserted. */
+#define ZYNQMP_CRL_APB_RESET_REASON_SRST BIT(4)
+/* Software system reset: Write to RESET_CTRL [soft_reset]. */
+#define ZYNQMP_CRL_APB_RESET_REASON_SOFT BIT(5)
+/* Software debugger reset: Write to BLOCKONLY_RST [debug_only]. */
+#define ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS BIT(6)
+
+struct zynqmp_reset_reason {
+ u32 mask;
+ enum reset_src_type type;
+};
+
+static const struct zynqmp_reset_reason reset_reasons[] = {
+ { ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS, RESET_UKWN },
+ { ZYNQMP_CRL_APB_RESET_REASON_SOFT, RESET_RST },
+ { ZYNQMP_CRL_APB_RESET_REASON_SRST, RESET_POR },
+ { ZYNQMP_CRL_APB_RESET_REASON_PSONLY, RESET_POR },
+ { ZYNQMP_CRL_APB_RESET_REASON_PMU, RESET_POR },
+ { ZYNQMP_CRL_APB_RESET_REASON_INTERNAL, RESET_POR },
+ { ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL, RESET_POR },
+ { /* sentinel */ }
+};
+
+static enum reset_src_type zynqmp_get_reset_src(void)
+{
+ enum reset_src_type type = RESET_UKWN;
+ unsigned int i;
+ u32 val;
+
+ val = readl(ZYNQMP_CRL_APB_RESET_REASON);
+
+ for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
+ if (val & reset_reasons[i].mask) {
+ type = reset_reasons[i].type;
+ break;
+ }
+ }
+
+ pr_info("ZynqMP reset reason %s (ZYNQMP_CRL_APB_RESET_REASON: 0x%08x)\n",
+ reset_source_to_string(type), val);
+
+ return type;
+}
+
+static int zynqmp_init(void)
+{
+ reset_source_set(zynqmp_get_reset_src());
+
+ return 0;
+}
+postcore_initcall(zynqmp_init);
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/7] clk: zynqmp: do not enable already enabled clocks
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
2021-06-24 10:23 ` [PATCH 3/7] dts: zcu104: add Barebox environment Michael Tretter
` (4 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
The pmu fw manages the permissions who can enable/disable the clocks.
There are a few clocks (TOPSW_LSBUS and LSBUS) which are exposed to
Barebox and Barebox assumes that is has to enable the clocks. However,
the pmu fw considers the clocks under its control and returns a
permission denied for the clock enable request.
Assume that clocks that are already enabled don't need to be enable by
Barebox to avoid the permission denied errors.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
drivers/clk/zynqmp/clk-gate-zynqmp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c
index a3b9ee21e506..493c1dfeaaa3 100644
--- a/drivers/clk/zynqmp/clk-gate-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c
@@ -28,6 +28,9 @@ static int zynqmp_clk_gate_enable(struct clk_hw *hw)
{
struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ if (clk_hw_is_enabled(hw))
+ return 0;
+
return gate->ops->clock_enable(gate->clk_id);
}
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/7] dts: zcu104: add Barebox environment
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
2021-06-24 10:23 ` [PATCH 2/7] clk: zynqmp: do not enable already enabled clocks Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
2021-06-24 10:23 ` [PATCH 4/7] ARM: zynqmp: add update handler Michael Tretter
` (3 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
Use the same partition on the SD-card that is used by the ROM loader to
find the BOOT.BIN (which contains the FSBL and Barebox) to store the
Barebox environment.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/dts/zynqmp-zcu104-revA.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 8c467ee97045..95b60a6b1d69 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -8,3 +8,13 @@
*/
#include <arm64/xilinx/zynqmp-zcu104-revA.dts>
+
+/ {
+ chosen {
+ environment {
+ compatible = "barebox,environment";
+ device-path = &sdhci1, "partname:0";
+ file-path = "barebox.env";
+ };
+ };
+};
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 4/7] ARM: zynqmp: add update handler
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
` (2 preceding siblings ...)
2021-06-24 10:23 ` [PATCH 3/7] dts: zcu104: add Barebox environment Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
2021-06-24 10:52 ` Ahmad Fatoum
2021-06-24 10:23 ` [PATCH 5/7] ARM: zynqmp: zcu104: register " Michael Tretter
` (2 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
The ZynqMP boots from an SDHCI device by reading a boot.bin file from
the FAT16/32 partition, which is the first partition in the MBR.
The update handler copies a boot.bin image to this partition, which
might be board specific.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/mach-zynqmp/Makefile | 1 +
.../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
3 files changed, 70 insertions(+)
create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index 14b8a4e46b87..e24a43c0d59f 100644
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
obj-y += firmware-zynqmp.o
obj-y += zynqmp.o
+obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
new file mode 100644
index 000000000000..8502791ee0f7
--- /dev/null
+++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
+ */
+#ifndef __MACH_ZYNQMP_BBU_H
+#define __MACH_ZYNQMP_BBU_H
+
+#include <bbu.h>
+
+#ifdef CONFIG_BAREBOX_UPDATE
+int zynqmp_bbu_register_handler(const char *name, char *devicefile,
+ unsigned long flags);
+#else
+static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
+ unsigned long flags)
+{
+ return 0;
+};
+#endif
+
+#endif /* __MACH_ZYNQMP_BBU_H */
diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
new file mode 100644
index 000000000000..d1197c01dc41
--- /dev/null
+++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
+ */
+
+#include <common.h>
+#include <libfile.h>
+#include <mach/zynqmp-bbu.h>
+
+static int zynqmp_bbu_handler(struct bbu_handler *handler,
+ struct bbu_data *data)
+{
+ int ret = 0;
+
+ ret = bbu_confirm(data);
+ if (ret)
+ return ret;
+
+ ret = copy_file(data->imagefile, data->devicefile, 1);
+ if (ret < 0) {
+ pr_err("update failed: %s", strerror(-ret));
+ return ret;
+ }
+
+ return ret;
+}
+
+int zynqmp_bbu_register_handler(const char *name, char *devicefile,
+ unsigned long flags)
+{
+ struct bbu_handler *handler;
+ int ret = 0;
+
+ if (!name || !devicefile)
+ return -EINVAL;
+
+ handler = xzalloc(sizeof(*handler));
+ handler->name = name;
+ handler->devicefile = devicefile;
+ handler->flags = flags;
+ handler->handler = zynqmp_bbu_handler;
+
+ ret = bbu_register_handler(handler);
+ if (ret)
+ free(handler);
+
+ return ret;
+}
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 5/7] ARM: zynqmp: zcu104: register update handler
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
` (3 preceding siblings ...)
2021-06-24 10:23 ` [PATCH 4/7] ARM: zynqmp: add update handler Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
2021-06-24 10:23 ` [PATCH 6/7] ARM: zynqmp: defconfig: enable more features Michael Tretter
2021-06-24 10:23 ` [PATCH 7/7] Documentation: zynqmp: add some documentation Michael Tretter
6 siblings, 0 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
As the zcu104 stores the environment in the same partition as the
barebox image, the partition is already mounted in ENV_MNT_DIR
("/boot"). Therefore, the update handler has to use the already
existing mount point for the update.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/boards/xilinx-zcu104/Makefile | 1 +
arch/arm/boards/xilinx-zcu104/board.c | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
create mode 100644 arch/arm/boards/xilinx-zcu104/board.c
diff --git a/arch/arm/boards/xilinx-zcu104/Makefile b/arch/arm/boards/xilinx-zcu104/Makefile
index 884d6e63b019..297f77d57ab1 100644
--- a/arch/arm/boards/xilinx-zcu104/Makefile
+++ b/arch/arm/boards/xilinx-zcu104/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-or-later
+obj-y += board.o
lwl-y += lowlevel.o lowlevel_init.o
diff --git a/arch/arm/boards/xilinx-zcu104/board.c b/arch/arm/boards/xilinx-zcu104/board.c
new file mode 100644
index 000000000000..7654d2bfac90
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/board.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/zynqmp-bbu.h>
+
+static int zcu104_register_update_handler(void)
+{
+ if (!of_machine_is_compatible("xlnx,zynqmp-zcu104"))
+ return 0;
+
+ return zynqmp_bbu_register_handler("SD", "/boot/BOOT.BIN",
+ BBU_HANDLER_FLAG_DEFAULT);
+}
+device_initcall(zcu104_register_update_handler);
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 6/7] ARM: zynqmp: defconfig: enable more features
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
` (4 preceding siblings ...)
2021-06-24 10:23 ` [PATCH 5/7] ARM: zynqmp: zcu104: register " Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
2021-06-24 10:23 ` [PATCH 7/7] Documentation: zynqmp: add some documentation Michael Tretter
6 siblings, 0 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
Enable network, file system, and PSCI support in the defconfig to get a
Barebox with a useful feature set when building the ZynqMP defconfig.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/configs/zynqmp_defconfig | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/configs/zynqmp_defconfig b/arch/arm/configs/zynqmp_defconfig
index 6f5612fa92a0..2cd878133223 100644
--- a/arch/arm/configs/zynqmp_defconfig
+++ b/arch/arm/configs/zynqmp_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARCH_ZYNQMP=y
CONFIG_MACH_XILINX_ZCU104=y
+CONFIG_ARM_PSCI_CLIENT=y
CONFIG_MMU=y
CONFIG_MALLOC_SIZE=0x0
CONFIG_MALLOC_TLSF=y
@@ -12,32 +13,54 @@ CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
+CONFIG_BLSPEC=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_RESET_SOURCE=y
CONFIG_LONGHELP=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_GO=y
CONFIG_CMD_RESET=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_EXPORT=y
+CONFIG_CMD_DEFAULTENV=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
CONFIG_CMD_LN=y
CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
CONFIG_CMD_EDIT=y
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_BAREBOX_UPDATE=y
+CONFIG_CMD_FIRMWARELOAD=y
+CONFIG_CMD_OF_OVERLAY=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_OF_BAREBOX_ENV_IN_FS=y
+CONFIG_OF_OVERLAY_LIVE=y
CONFIG_DRIVER_SERIAL_CADENCE=y
CONFIG_DRIVER_NET_MACB=y
+CONFIG_DP83867_PHY=y
# CONFIG_SPI is not set
CONFIG_MCI=y
CONFIG_MCI_ARASAN=y
CONFIG_FIRMWARE_ZYNQMP_FPGA=y
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
CONFIG_DIGEST=y
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 7/7] Documentation: zynqmp: add some documentation
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
` (5 preceding siblings ...)
2021-06-24 10:23 ` [PATCH 6/7] ARM: zynqmp: defconfig: enable more features Michael Tretter
@ 2021-06-24 10:23 ` Michael Tretter
6 siblings, 0 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 10:23 UTC (permalink / raw)
To: barebox
Add at least some information how Barebox can be used on the ZynqMP and
what is required to create a bootable image.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Documentation/boards/zynqmp.rst | 40 +++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/boards/zynqmp.rst
diff --git a/Documentation/boards/zynqmp.rst b/Documentation/boards/zynqmp.rst
new file mode 100644
index 000000000000..05d41c401dc2
--- /dev/null
+++ b/Documentation/boards/zynqmp.rst
@@ -0,0 +1,40 @@
+Xilinx ZynqMP Ultrascale+
+=========================
+
+Barebox has support as a second stage boot loader for the Xilinx ZynqMP
+Ultrascale+.
+
+Image creation
+--------------
+
+Currently, Barebox only supports booting as a second stage boot loader from an
+SD-card. It relies on the FSBL_ to initialize the base system including sdram
+setup and pin muxing.
+
+The ZynqMP defconfig supports the ZCU104 reference board. Use it to build the
+Barebox image::
+
+ make ARCH=arm64 zynqmp_defconfig
+ make ARCH=arm64
+
+.. note:: The resulting image ``images/barebox-zynqmp-zcu104.img`` is **not** an image
+ that can directly be booted on the ZynqMP.
+
+For a bootable BOOT.BIN image, you also need to build the FSBL_ and a ZynqMP
+TF-A. Prepare these separately using the respective instructions.
+
+Use bootgen_ or ``mkimage -T zynqmpbif`` from the U-boot tools to build the
+final BOOT.BIN image that can be loaded by the ROM code. Check the
+instructions for these tools how to prepare the BOOT.BIN image.
+
+Create a FAT partition as the first partition of the SD card and copy the
+produced BOOT.BIN into this partition.
+
+.. _FSBL: `https://github.com/Xilinx/embeddedsw/`
+.. _bootgen: `https://github.com/Xilinx/bootgen`
+
+Booting Barebox
+---------------
+
+The FSBL loads the TF-A and Barebox, jumps to the TF-A, which will then return
+to Barebox. Afterwards, you can use Barebox as usual.
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/7] ARM: zynqmp: set reset source
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
@ 2021-06-24 10:48 ` Ahmad Fatoum
2021-06-24 13:20 ` Michael Tretter
0 siblings, 1 reply; 15+ messages in thread
From: Ahmad Fatoum @ 2021-06-24 10:48 UTC (permalink / raw)
To: Michael Tretter, barebox
On 24.06.21 12:23, Michael Tretter wrote:
> The reset reason is available in the APB register set on the ZynqMP.
> Read the reset reason and set the reset source accordingly.
>
> There might be multiple bits set in the APB register. Use the MSB for
> determining the actual reset source.
APB is usually the AMBA Advanced Peripheral Bus. Perhaps CRL is the
actual name of the register and APB just tells that it's mapped there?
>
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
> arch/arm/mach-zynqmp/Makefile | 1 +
> arch/arm/mach-zynqmp/include/mach/zynqmp.h | 6 ++
> arch/arm/mach-zynqmp/zynqmp.c | 74 ++++++++++++++++++++++
> 3 files changed, 81 insertions(+)
> create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
> create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
>
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> index 021efc94afaf..14b8a4e46b87 100644
> --- a/arch/arm/mach-zynqmp/Makefile
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0-or-later
> obj-y += firmware-zynqmp.o
> +obj-y += zynqmp.o
> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp.h b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
> new file mode 100644
> index 000000000000..f6c05f35a470
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
Nitpick: revision.h sounds more self-describing.
> @@ -0,0 +1,6 @@
> +#ifndef __MACH_ZYNQMP_H
> +#define __MACH_ZYNQMP_H
> +
> +int zynqmp_soc_revision(void);
> +
> +#endif /* __MACH_ZYNQMP_H */
> diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
> new file mode 100644
> index 000000000000..2b3bd8406ce9
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/zynqmp.c
> @@ -0,0 +1,74 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <linux/types.h>
> +#include <reset_source.h>
> +
> +#include <mach/zynqmp.h>
> +
> +#define ZYNQMP_CRL_APB_BASE 0xff5e0000
> +#define ZYNQMP_CRL_APB_RESET_REASON (ZYNQMP_CRL_APB_BASE + 0x220)
> +
> +/* External POR: The PS_POR_B reset signal pin was asserted. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL BIT(0)
> +/* Internal POR: A system error triggered a POR reset. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_INTERNAL BIT(1)
> +/* Internal system reset; A system error triggered a system reset. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_PMU BIT(2)
> +/* PS-only reset: Write to PMU_GLOBAL.GLOBAL_RESET [PS_ONLY_RST]. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_PSONLY BIT(3)
> +/* External system reset: The PS_SRST_B reset signal pin was asserted. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_SRST BIT(4)
> +/* Software system reset: Write to RESET_CTRL [soft_reset]. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_SOFT BIT(5)
> +/* Software debugger reset: Write to BLOCKONLY_RST [debug_only]. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS BIT(6)
> +
> +struct zynqmp_reset_reason {
> + u32 mask;
> + enum reset_src_type type;
> +};
> +
> +static const struct zynqmp_reset_reason reset_reasons[] = {
> + { ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS, RESET_UKWN },
RESET_JTAG?
> + { ZYNQMP_CRL_APB_RESET_REASON_SOFT, RESET_RST },
> + { ZYNQMP_CRL_APB_RESET_REASON_SRST, RESET_POR },
> + { ZYNQMP_CRL_APB_RESET_REASON_PSONLY, RESET_POR },
> + { ZYNQMP_CRL_APB_RESET_REASON_PMU, RESET_POR },
> + { ZYNQMP_CRL_APB_RESET_REASON_INTERNAL, RESET_POR },
> + { ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL, RESET_POR },
RESET_EXT?
> + { /* sentinel */ }
> +};
> +
> +static enum reset_src_type zynqmp_get_reset_src(void)
> +{
> + enum reset_src_type type = RESET_UKWN;
> + unsigned int i;
> + u32 val;
> +
> + val = readl(ZYNQMP_CRL_APB_RESET_REASON);
> +
> + for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
> + if (val & reset_reasons[i].mask) {
> + type = reset_reasons[i].type;
> + break;
> + }
> + }
> +
> + pr_info("ZynqMP reset reason %s (ZYNQMP_CRL_APB_RESET_REASON: 0x%08x)\n",
> + reset_source_to_string(type), val);
> +
> + return type;
> +}
> +
> +static int zynqmp_init(void)
> +{
> + reset_source_set(zynqmp_get_reset_src());
> +
> + return 0;
> +}
> +postcore_initcall(zynqmp_init);
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/7] ARM: zynqmp: add update handler
2021-06-24 10:23 ` [PATCH 4/7] ARM: zynqmp: add update handler Michael Tretter
@ 2021-06-24 10:52 ` Ahmad Fatoum
2021-06-24 13:24 ` Michael Tretter
0 siblings, 1 reply; 15+ messages in thread
From: Ahmad Fatoum @ 2021-06-24 10:52 UTC (permalink / raw)
To: Michael Tretter, barebox
Hi,
On 24.06.21 12:23, Michael Tretter wrote:
> The ZynqMP boots from an SDHCI device by reading a boot.bin file from
> the FAT16/32 partition, which is the first partition in the MBR.
>
> The update handler copies a boot.bin image to this partition, which
> might be board specific.
Is barebox the boot.bin or is that a separate first stage bootloader?
>
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
> arch/arm/mach-zynqmp/Makefile | 1 +
> .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
> arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
> 3 files changed, 70 insertions(+)
> create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
>
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> index 14b8a4e46b87..e24a43c0d59f 100644
> --- a/arch/arm/mach-zynqmp/Makefile
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-or-later
> obj-y += firmware-zynqmp.o
> obj-y += zynqmp.o
> +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> new file mode 100644
> index 000000000000..8502791ee0f7
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> + */
> +#ifndef __MACH_ZYNQMP_BBU_H
> +#define __MACH_ZYNQMP_BBU_H
> +
> +#include <bbu.h>
> +
> +#ifdef CONFIG_BAREBOX_UPDATE
> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> + unsigned long flags);
> +#else
> +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> + unsigned long flags)
> +{
> + return 0;
> +};
> +#endif
> +
> +#endif /* __MACH_ZYNQMP_BBU_H */
> diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> new file mode 100644
> index 000000000000..d1197c01dc41
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> + */
> +
> +#include <common.h>
> +#include <libfile.h>
> +#include <mach/zynqmp-bbu.h>
> +
> +static int zynqmp_bbu_handler(struct bbu_handler *handler,
> + struct bbu_data *data)
> +{
> + int ret = 0;
> +
> + ret = bbu_confirm(data);
> + if (ret)
> + return ret;
> +
> + ret = copy_file(data->imagefile, data->devicefile, 1);
> + if (ret < 0) {
> + pr_err("update failed: %s", strerror(-ret));
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> + unsigned long flags)
> +{
> + struct bbu_handler *handler;
> + int ret = 0;
> +
> + if (!name || !devicefile)
> + return -EINVAL;
> +
> + handler = xzalloc(sizeof(*handler));
> + handler->name = name;
> + handler->devicefile = devicefile;
> + handler->flags = flags;
> + handler->handler = zynqmp_bbu_handler;
> +
> + ret = bbu_register_handler(handler);
> + if (ret)
> + free(handler);
> +
> + return ret;
> +}
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/7] ARM: zynqmp: set reset source
2021-06-24 10:48 ` Ahmad Fatoum
@ 2021-06-24 13:20 ` Michael Tretter
2021-06-24 13:30 ` Ahmad Fatoum
0 siblings, 1 reply; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 13:20 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
On Thu, 24 Jun 2021 12:48:44 +0200, Ahmad Fatoum wrote:
> On 24.06.21 12:23, Michael Tretter wrote:
> > The reset reason is available in the APB register set on the ZynqMP.
> > Read the reset reason and set the reset source accordingly.
> >
> > There might be multiple bits set in the APB register. Use the MSB for
> > determining the actual reset source.
>
> APB is usually the AMBA Advanced Peripheral Bus. Perhaps CRL is the
> actual name of the register and APB just tells that it's mapped there?
Ack. The data sheet calls it "Clock and Reset control registers for LPD." I
will fix it in v2.
>
> >
> > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> > ---
> > arch/arm/mach-zynqmp/Makefile | 1 +
> > arch/arm/mach-zynqmp/include/mach/zynqmp.h | 6 ++
> > arch/arm/mach-zynqmp/zynqmp.c | 74 ++++++++++++++++++++++
> > 3 files changed, 81 insertions(+)
> > create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
> > create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
> >
> > diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> > index 021efc94afaf..14b8a4e46b87 100644
> > --- a/arch/arm/mach-zynqmp/Makefile
> > +++ b/arch/arm/mach-zynqmp/Makefile
> > @@ -1,2 +1,3 @@
> > # SPDX-License-Identifier: GPL-2.0-or-later
> > obj-y += firmware-zynqmp.o
> > +obj-y += zynqmp.o
> > diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp.h b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
> > new file mode 100644
> > index 000000000000..f6c05f35a470
> > --- /dev/null
> > +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
>
> Nitpick: revision.h sounds more self-describing.
Ok. I thought there might be some more soc specific function instead of
revision specific functions here, but revision.h is fine for me as well.
>
> > @@ -0,0 +1,6 @@
> > +#ifndef __MACH_ZYNQMP_H
> > +#define __MACH_ZYNQMP_H
> > +
> > +int zynqmp_soc_revision(void);
> > +
> > +#endif /* __MACH_ZYNQMP_H */
> > diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
> > new file mode 100644
> > index 000000000000..2b3bd8406ce9
> > --- /dev/null
> > +++ b/arch/arm/mach-zynqmp/zynqmp.c
> > @@ -0,0 +1,74 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> > + */
> > +
> > +#include <common.h>
> > +#include <init.h>
> > +#include <linux/types.h>
> > +#include <reset_source.h>
> > +
> > +#include <mach/zynqmp.h>
> > +
> > +#define ZYNQMP_CRL_APB_BASE 0xff5e0000
> > +#define ZYNQMP_CRL_APB_RESET_REASON (ZYNQMP_CRL_APB_BASE + 0x220)
> > +
> > +/* External POR: The PS_POR_B reset signal pin was asserted. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL BIT(0)
> > +/* Internal POR: A system error triggered a POR reset. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_INTERNAL BIT(1)
> > +/* Internal system reset; A system error triggered a system reset. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_PMU BIT(2)
> > +/* PS-only reset: Write to PMU_GLOBAL.GLOBAL_RESET [PS_ONLY_RST]. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_PSONLY BIT(3)
> > +/* External system reset: The PS_SRST_B reset signal pin was asserted. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_SRST BIT(4)
> > +/* Software system reset: Write to RESET_CTRL [soft_reset]. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_SOFT BIT(5)
> > +/* Software debugger reset: Write to BLOCKONLY_RST [debug_only]. */
> > +#define ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS BIT(6)
> > +
> > +struct zynqmp_reset_reason {
> > + u32 mask;
> > + enum reset_src_type type;
> > +};
> > +
> > +static const struct zynqmp_reset_reason reset_reasons[] = {
> > + { ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS, RESET_UKWN },
>
> RESET_JTAG?
I am not sure, if I understand RESET_JTAG correctly. The reference manual says
that it is like a soft reset while preserving the debug logic and originates
in the DAP controller. Is this RESET_JTAG?
>
> > + { ZYNQMP_CRL_APB_RESET_REASON_SOFT, RESET_RST },
> > + { ZYNQMP_CRL_APB_RESET_REASON_SRST, RESET_POR },
> > + { ZYNQMP_CRL_APB_RESET_REASON_PSONLY, RESET_POR },
> > + { ZYNQMP_CRL_APB_RESET_REASON_PMU, RESET_POR },
> > + { ZYNQMP_CRL_APB_RESET_REASON_INTERNAL, RESET_POR },
> > + { ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL, RESET_POR },
>
> RESET_EXT?
This bit is set for a normal POR, too.
>
> > + { /* sentinel */ }
> > +};
> > +
> > +static enum reset_src_type zynqmp_get_reset_src(void)
> > +{
> > + enum reset_src_type type = RESET_UKWN;
> > + unsigned int i;
> > + u32 val;
> > +
> > + val = readl(ZYNQMP_CRL_APB_RESET_REASON);
> > +
> > + for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
> > + if (val & reset_reasons[i].mask) {
> > + type = reset_reasons[i].type;
> > + break;
> > + }
> > + }
> > +
> > + pr_info("ZynqMP reset reason %s (ZYNQMP_CRL_APB_RESET_REASON: 0x%08x)\n",
> > + reset_source_to_string(type), val);
> > +
> > + return type;
> > +}
> > +
> > +static int zynqmp_init(void)
> > +{
> > + reset_source_set(zynqmp_get_reset_src());
> > +
> > + return 0;
> > +}
> > +postcore_initcall(zynqmp_init);
> >
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/7] ARM: zynqmp: add update handler
2021-06-24 10:52 ` Ahmad Fatoum
@ 2021-06-24 13:24 ` Michael Tretter
2021-06-24 13:34 ` Ahmad Fatoum
0 siblings, 1 reply; 15+ messages in thread
From: Michael Tretter @ 2021-06-24 13:24 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
On Thu, 24 Jun 2021 12:52:58 +0200, Ahmad Fatoum wrote:
> On 24.06.21 12:23, Michael Tretter wrote:
> > The ZynqMP boots from an SDHCI device by reading a boot.bin file from
> > the FAT16/32 partition, which is the first partition in the MBR.
> >
> > The update handler copies a boot.bin image to this partition, which
> > might be board specific.
>
> Is barebox the boot.bin or is that a separate first stage bootloader?
Both. The boot.bin contains at least the first stage bootloader, TF-A, and
Barebox. You cannot boot a "standalone" Barebox image on the ZynqMP.
I also documented this in the zynqmp documentation as part of this patch
series.
Michael
>
> >
> > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> > ---
> > arch/arm/mach-zynqmp/Makefile | 1 +
> > .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
> > arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
> > 3 files changed, 70 insertions(+)
> > create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> > create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
> >
> > diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> > index 14b8a4e46b87..e24a43c0d59f 100644
> > --- a/arch/arm/mach-zynqmp/Makefile
> > +++ b/arch/arm/mach-zynqmp/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0-or-later
> > obj-y += firmware-zynqmp.o
> > obj-y += zynqmp.o
> > +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
> > diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> > new file mode 100644
> > index 000000000000..8502791ee0f7
> > --- /dev/null
> > +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> > @@ -0,0 +1,21 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> > + */
> > +#ifndef __MACH_ZYNQMP_BBU_H
> > +#define __MACH_ZYNQMP_BBU_H
> > +
> > +#include <bbu.h>
> > +
> > +#ifdef CONFIG_BAREBOX_UPDATE
> > +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> > + unsigned long flags);
> > +#else
> > +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> > + unsigned long flags)
> > +{
> > + return 0;
> > +};
> > +#endif
> > +
> > +#endif /* __MACH_ZYNQMP_BBU_H */
> > diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> > new file mode 100644
> > index 000000000000..d1197c01dc41
> > --- /dev/null
> > +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> > @@ -0,0 +1,48 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> > + */
> > +
> > +#include <common.h>
> > +#include <libfile.h>
> > +#include <mach/zynqmp-bbu.h>
> > +
> > +static int zynqmp_bbu_handler(struct bbu_handler *handler,
> > + struct bbu_data *data)
> > +{
> > + int ret = 0;
> > +
> > + ret = bbu_confirm(data);
> > + if (ret)
> > + return ret;
> > +
> > + ret = copy_file(data->imagefile, data->devicefile, 1);
> > + if (ret < 0) {
> > + pr_err("update failed: %s", strerror(-ret));
> > + return ret;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> > + unsigned long flags)
> > +{
> > + struct bbu_handler *handler;
> > + int ret = 0;
> > +
> > + if (!name || !devicefile)
> > + return -EINVAL;
> > +
> > + handler = xzalloc(sizeof(*handler));
> > + handler->name = name;
> > + handler->devicefile = devicefile;
> > + handler->flags = flags;
> > + handler->handler = zynqmp_bbu_handler;
> > +
> > + ret = bbu_register_handler(handler);
> > + if (ret)
> > + free(handler);
> > +
> > + return ret;
> > +}
> >
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/7] ARM: zynqmp: set reset source
2021-06-24 13:20 ` Michael Tretter
@ 2021-06-24 13:30 ` Ahmad Fatoum
0 siblings, 0 replies; 15+ messages in thread
From: Ahmad Fatoum @ 2021-06-24 13:30 UTC (permalink / raw)
To: Michael Tretter; +Cc: barebox
On 24.06.21 15:20, Michael Tretter wrote:
> On Thu, 24 Jun 2021 12:48:44 +0200, Ahmad Fatoum wrote:
>> On 24.06.21 12:23, Michael Tretter wrote:
>>> The reset reason is available in the APB register set on the ZynqMP.
>>> Read the reset reason and set the reset source accordingly.
>>>
>>> There might be multiple bits set in the APB register. Use the MSB for
>>> determining the actual reset source.
>>
>> APB is usually the AMBA Advanced Peripheral Bus. Perhaps CRL is the
>> actual name of the register and APB just tells that it's mapped there?
>
> Ack. The data sheet calls it "Clock and Reset control registers for LPD." I
> will fix it in v2.
>
>>
>>>
>>> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
>>> ---
>>> arch/arm/mach-zynqmp/Makefile | 1 +
>>> arch/arm/mach-zynqmp/include/mach/zynqmp.h | 6 ++
>>> arch/arm/mach-zynqmp/zynqmp.c | 74 ++++++++++++++++++++++
>>> 3 files changed, 81 insertions(+)
>>> create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
>>> create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
>>>
>>> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
>>> index 021efc94afaf..14b8a4e46b87 100644
>>> --- a/arch/arm/mach-zynqmp/Makefile
>>> +++ b/arch/arm/mach-zynqmp/Makefile
>>> @@ -1,2 +1,3 @@
>>> # SPDX-License-Identifier: GPL-2.0-or-later
>>> obj-y += firmware-zynqmp.o
>>> +obj-y += zynqmp.o
>>> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp.h b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
>>> new file mode 100644
>>> index 000000000000..f6c05f35a470
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
>>
>> Nitpick: revision.h sounds more self-describing.
>
> Ok. I thought there might be some more soc specific function instead of
> revision specific functions here, but revision.h is fine for me as well.
>
>>
>>> @@ -0,0 +1,6 @@
>>> +#ifndef __MACH_ZYNQMP_H
>>> +#define __MACH_ZYNQMP_H
>>> +
>>> +int zynqmp_soc_revision(void);
>>> +
>>> +#endif /* __MACH_ZYNQMP_H */
>>> diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
>>> new file mode 100644
>>> index 000000000000..2b3bd8406ce9
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/zynqmp.c
>>> @@ -0,0 +1,74 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <init.h>
>>> +#include <linux/types.h>
>>> +#include <reset_source.h>
>>> +
>>> +#include <mach/zynqmp.h>
>>> +
>>> +#define ZYNQMP_CRL_APB_BASE 0xff5e0000
>>> +#define ZYNQMP_CRL_APB_RESET_REASON (ZYNQMP_CRL_APB_BASE + 0x220)
>>> +
>>> +/* External POR: The PS_POR_B reset signal pin was asserted. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL BIT(0)
>>> +/* Internal POR: A system error triggered a POR reset. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_INTERNAL BIT(1)
>>> +/* Internal system reset; A system error triggered a system reset. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_PMU BIT(2)
>>> +/* PS-only reset: Write to PMU_GLOBAL.GLOBAL_RESET [PS_ONLY_RST]. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_PSONLY BIT(3)
>>> +/* External system reset: The PS_SRST_B reset signal pin was asserted. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_SRST BIT(4)
>>> +/* Software system reset: Write to RESET_CTRL [soft_reset]. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_SOFT BIT(5)
>>> +/* Software debugger reset: Write to BLOCKONLY_RST [debug_only]. */
>>> +#define ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS BIT(6)
>>> +
>>> +struct zynqmp_reset_reason {
>>> + u32 mask;
>>> + enum reset_src_type type;
>>> +};
>>> +
>>> +static const struct zynqmp_reset_reason reset_reasons[] = {
>>> + { ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS, RESET_UKWN },
>>
>> RESET_JTAG?
>
> I am not sure, if I understand RESET_JTAG correctly. The reference manual says
> that it is like a soft reset while preserving the debug logic and originates
> in the DAP controller. Is this RESET_JTAG?
Yes. DAP may be used with SWD as well, but as far as barebox reset reasons are
concerned, every debugger related reset should be RESET_JTAG.
>
>>
>>> + { ZYNQMP_CRL_APB_RESET_REASON_SOFT, RESET_RST },
>>> + { ZYNQMP_CRL_APB_RESET_REASON_SRST, RESET_POR },
>>> + { ZYNQMP_CRL_APB_RESET_REASON_PSONLY, RESET_POR },
>>> + { ZYNQMP_CRL_APB_RESET_REASON_PMU, RESET_POR },
>>> + { ZYNQMP_CRL_APB_RESET_REASON_INTERNAL, RESET_POR },
>>> + { ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL, RESET_POR },
>>
>> RESET_EXT?
>
> This bit is set for a normal POR, too.
>
>>
>>> + { /* sentinel */ }
>>> +};
>>> +
>>> +static enum reset_src_type zynqmp_get_reset_src(void)
>>> +{
>>> + enum reset_src_type type = RESET_UKWN;
>>> + unsigned int i;
>>> + u32 val;
>>> +
>>> + val = readl(ZYNQMP_CRL_APB_RESET_REASON);
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
>>> + if (val & reset_reasons[i].mask) {
>>> + type = reset_reasons[i].type;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + pr_info("ZynqMP reset reason %s (ZYNQMP_CRL_APB_RESET_REASON: 0x%08x)\n",
>>> + reset_source_to_string(type), val);
>>> +
>>> + return type;
>>> +}
>>> +
>>> +static int zynqmp_init(void)
>>> +{
>>> + reset_source_set(zynqmp_get_reset_src());
>>> +
>>> + return 0;
>>> +}
>>> +postcore_initcall(zynqmp_init);
>>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/7] ARM: zynqmp: add update handler
2021-06-24 13:24 ` Michael Tretter
@ 2021-06-24 13:34 ` Ahmad Fatoum
2021-06-25 9:05 ` Michael Tretter
0 siblings, 1 reply; 15+ messages in thread
From: Ahmad Fatoum @ 2021-06-24 13:34 UTC (permalink / raw)
To: Michael Tretter; +Cc: barebox
On 24.06.21 15:24, Michael Tretter wrote:
> On Thu, 24 Jun 2021 12:52:58 +0200, Ahmad Fatoum wrote:
>> On 24.06.21 12:23, Michael Tretter wrote:
>>> The ZynqMP boots from an SDHCI device by reading a boot.bin file from
>>> the FAT16/32 partition, which is the first partition in the MBR.
>>>
>>> The update handler copies a boot.bin image to this partition, which
>>> might be board specific.
>>
>> Is barebox the boot.bin or is that a separate first stage bootloader?
>
> Both. The boot.bin contains at least the first stage bootloader, TF-A, and
> Barebox. You cannot boot a "standalone" Barebox image on the ZynqMP.
>
> I also documented this in the zynqmp documentation as part of this patch
> series.
I saw that after writing the mail here. Thanks for clarifying.
>
> Michael
>
>>
>>>
>>> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
>>> ---
>>> arch/arm/mach-zynqmp/Makefile | 1 +
>>> .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
>>> arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
>>> 3 files changed, 70 insertions(+)
>>> create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>>> create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
>>>
>>> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
>>> index 14b8a4e46b87..e24a43c0d59f 100644
>>> --- a/arch/arm/mach-zynqmp/Makefile
>>> +++ b/arch/arm/mach-zynqmp/Makefile
>>> @@ -1,3 +1,4 @@
>>> # SPDX-License-Identifier: GPL-2.0-or-later
>>> obj-y += firmware-zynqmp.o
>>> obj-y += zynqmp.o
>>> +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
>>> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>>> new file mode 100644
>>> index 000000000000..8502791ee0f7
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>>> @@ -0,0 +1,21 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>> +/*
>>> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
>>> + */
>>> +#ifndef __MACH_ZYNQMP_BBU_H
>>> +#define __MACH_ZYNQMP_BBU_H
>>> +
>>> +#include <bbu.h>
>>> +
>>> +#ifdef CONFIG_BAREBOX_UPDATE
>>> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
>>> + unsigned long flags);
>>> +#else
>>> +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
>>> + unsigned long flags)
>>> +{
>>> + return 0;
>>> +};
>>> +#endif
>>> +
>>> +#endif /* __MACH_ZYNQMP_BBU_H */
>>> diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
>>> new file mode 100644
>>> index 000000000000..d1197c01dc41
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
>>> @@ -0,0 +1,48 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <libfile.h>
>>> +#include <mach/zynqmp-bbu.h>
>>> +
>>> +static int zynqmp_bbu_handler(struct bbu_handler *handler,
>>> + struct bbu_data *data)
>>> +{
>>> + int ret = 0;
>>> +
>>> + ret = bbu_confirm(data);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = copy_file(data->imagefile, data->devicefile, 1);
>>> + if (ret < 0) {
>>> + pr_err("update failed: %s", strerror(-ret));
>>> + return ret;
>>> + }
EFI also registers an barebox update handler for a file: /boot/EFI/BOOT/BOOTx64.EFI,
but there apparently bbu_register_std_file_update suffices.
Did you check if that would work for you as well?
It's still a good idea to have a zynqmp specific wrapper for bbu_register_std_file_update,
but I am not sure you need to duplicate the copy_file stuff.
Also, this seems SD-specific. I assume eMMC would boot from boot partitions?
If so, zynqmp_bbu_register_sd_handler may be a more apt name.
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
>>> + unsigned long flags)
>>> +{
>>> + struct bbu_handler *handler;
>>> + int ret = 0;
>>> +
>>> + if (!name || !devicefile)
>>> + return -EINVAL;
>>> +
>>> + handler = xzalloc(sizeof(*handler));
>>> + handler->name = name;
>>> + handler->devicefile = devicefile;
>>> + handler->flags = flags;
>>> + handler->handler = zynqmp_bbu_handler;
>>> +
>>> + ret = bbu_register_handler(handler);
>>> + if (ret)
>>> + free(handler);
>>> +
>>> + return ret;
>>> +}
>>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/7] ARM: zynqmp: add update handler
2021-06-24 13:34 ` Ahmad Fatoum
@ 2021-06-25 9:05 ` Michael Tretter
0 siblings, 0 replies; 15+ messages in thread
From: Michael Tretter @ 2021-06-25 9:05 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
On Thu, 24 Jun 2021 15:34:33 +0200, Ahmad Fatoum wrote:
> On 24.06.21 15:24, Michael Tretter wrote:
> > On Thu, 24 Jun 2021 12:52:58 +0200, Ahmad Fatoum wrote:
> >> On 24.06.21 12:23, Michael Tretter wrote:
> >>> The ZynqMP boots from an SDHCI device by reading a boot.bin file from
> >>> the FAT16/32 partition, which is the first partition in the MBR.
> >>>
> >>> The update handler copies a boot.bin image to this partition, which
> >>> might be board specific.
> >>
> >> Is barebox the boot.bin or is that a separate first stage bootloader?
> >
> > Both. The boot.bin contains at least the first stage bootloader, TF-A, and
> > Barebox. You cannot boot a "standalone" Barebox image on the ZynqMP.
> >
> > I also documented this in the zynqmp documentation as part of this patch
> > series.
>
> I saw that after writing the mail here. Thanks for clarifying.
>
> >
> > Michael
> >
> >>
> >>>
> >>> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> >>> ---
> >>> arch/arm/mach-zynqmp/Makefile | 1 +
> >>> .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
> >>> arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
> >>> 3 files changed, 70 insertions(+)
> >>> create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> >>> create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
> >>>
> >>> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> >>> index 14b8a4e46b87..e24a43c0d59f 100644
> >>> --- a/arch/arm/mach-zynqmp/Makefile
> >>> +++ b/arch/arm/mach-zynqmp/Makefile
> >>> @@ -1,3 +1,4 @@
> >>> # SPDX-License-Identifier: GPL-2.0-or-later
> >>> obj-y += firmware-zynqmp.o
> >>> obj-y += zynqmp.o
> >>> +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
> >>> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> >>> new file mode 100644
> >>> index 000000000000..8502791ee0f7
> >>> --- /dev/null
> >>> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> >>> @@ -0,0 +1,21 @@
> >>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>> +/*
> >>> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> >>> + */
> >>> +#ifndef __MACH_ZYNQMP_BBU_H
> >>> +#define __MACH_ZYNQMP_BBU_H
> >>> +
> >>> +#include <bbu.h>
> >>> +
> >>> +#ifdef CONFIG_BAREBOX_UPDATE
> >>> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> >>> + unsigned long flags);
> >>> +#else
> >>> +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> >>> + unsigned long flags)
> >>> +{
> >>> + return 0;
> >>> +};
> >>> +#endif
> >>> +
> >>> +#endif /* __MACH_ZYNQMP_BBU_H */
> >>> diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> >>> new file mode 100644
> >>> index 000000000000..d1197c01dc41
> >>> --- /dev/null
> >>> +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> >>> @@ -0,0 +1,48 @@
> >>> +// SPDX-License-Identifier: GPL-2.0-only
> >>> +/*
> >>> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> >>> + */
> >>> +
> >>> +#include <common.h>
> >>> +#include <libfile.h>
> >>> +#include <mach/zynqmp-bbu.h>
> >>> +
> >>> +static int zynqmp_bbu_handler(struct bbu_handler *handler,
> >>> + struct bbu_data *data)
> >>> +{
> >>> + int ret = 0;
> >>> +
> >>> + ret = bbu_confirm(data);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + ret = copy_file(data->imagefile, data->devicefile, 1);
> >>> + if (ret < 0) {
> >>> + pr_err("update failed: %s", strerror(-ret));
> >>> + return ret;
> >>> + }
>
> EFI also registers an barebox update handler for a file: /boot/EFI/BOOT/BOOTx64.EFI,
> but there apparently bbu_register_std_file_update suffices.
>
> Did you check if that would work for you as well?
>
> It's still a good idea to have a zynqmp specific wrapper for bbu_register_std_file_update,
> but I am not sure you need to duplicate the copy_file stuff.
I didn't know about the handler and haven't checked this. If this can work,
I'll sent another patch to replace the copy_file stuff with use of the
existing functions.
>
> Also, this seems SD-specific. I assume eMMC would boot from boot partitions?
> If so, zynqmp_bbu_register_sd_handler may be a more apt name.
No, eMMC boot partitions are not supported by the ROM code. The handler is the
same for SD and eMMC.
Michael
>
>
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> >>> + unsigned long flags)
> >>> +{
> >>> + struct bbu_handler *handler;
> >>> + int ret = 0;
> >>> +
> >>> + if (!name || !devicefile)
> >>> + return -EINVAL;
> >>> +
> >>> + handler = xzalloc(sizeof(*handler));
> >>> + handler->name = name;
> >>> + handler->devicefile = devicefile;
> >>> + handler->flags = flags;
> >>> + handler->handler = zynqmp_bbu_handler;
> >>> +
> >>> + ret = bbu_register_handler(handler);
> >>> + if (ret)
> >>> + free(handler);
> >>> +
> >>> + return ret;
> >>> +}
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2021-06-25 10:05 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
2021-06-24 10:48 ` Ahmad Fatoum
2021-06-24 13:20 ` Michael Tretter
2021-06-24 13:30 ` Ahmad Fatoum
2021-06-24 10:23 ` [PATCH 2/7] clk: zynqmp: do not enable already enabled clocks Michael Tretter
2021-06-24 10:23 ` [PATCH 3/7] dts: zcu104: add Barebox environment Michael Tretter
2021-06-24 10:23 ` [PATCH 4/7] ARM: zynqmp: add update handler Michael Tretter
2021-06-24 10:52 ` Ahmad Fatoum
2021-06-24 13:24 ` Michael Tretter
2021-06-24 13:34 ` Ahmad Fatoum
2021-06-25 9:05 ` Michael Tretter
2021-06-24 10:23 ` [PATCH 5/7] ARM: zynqmp: zcu104: register " Michael Tretter
2021-06-24 10:23 ` [PATCH 6/7] ARM: zynqmp: defconfig: enable more features Michael Tretter
2021-06-24 10:23 ` [PATCH 7/7] Documentation: zynqmp: add some documentation Michael Tretter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox