From: Andrej Picej <andrej.picej@norik.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 5/6] ARM: dts: imx6qdl: pfla02: use dummy regulators
Date: Fri, 19 Nov 2021 10:54:28 +0100 [thread overview]
Message-ID: <20211119095429.1905473-6-andrej.picej@norik.com> (raw)
In-Reply-To: <20211119095429.1905473-1-andrej.picej@norik.com>
The power for the phyFLEX sd cards and ethernet controller are supplied
by the DA9063 PMIC's LDOs. There is no barebox driver for those LDO
regulators. Thus use dummy-regulators to suppress warning message.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
Changes in v2:
- move "barebox,allow-dummy-supply" property from regulator consumer to
regulator provider
---
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
index 0653fcc3c..ada160768 100644
--- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
@@ -81,15 +81,6 @@
};
};
-&fec {
- /*
- * barebox doesn't have a driver for the PMIC providing the phy-supply
- * (dlg,da9063). So remove the phy-supply property and rely on the
- * PMIC's reset default which has this supply enabled.
- */
- /delete-property/ phy-supply;
-};
-
&gpmi {
partitions {
compatible = "fixed-partitions";
@@ -162,5 +153,8 @@
watchdog-priority = <500>;
restart-priority = <500>;
reset-source-priority = <500>;
+ regulators {
+ barebox,allow-dummy-supply;
+ };
};
};
--
2.25.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-11-19 9:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 9:54 [PATCH v2 0/6] PHYTEC patches to be mainlined Andrej Picej
2021-11-19 9:54 ` [PATCH v2 1/6] flash-header-phytec-pcl063: Set SOC voltage to 1.25 V during boot Andrej Picej
2021-11-19 9:54 ` [PATCH v2 2/6] ARM: configs: imx_v7_defconfig: add OF commands Andrej Picej
2021-11-19 9:54 ` [PATCH v2 3/6] ARM: configs: imx_v7_defconfig: add OCOTP write support Andrej Picej
2021-11-19 9:54 ` [PATCH v2 4/6] regulator: allow use of dummy regulator Andrej Picej
2021-11-19 10:49 ` Trent Piepho
2021-11-19 12:35 ` Andrej Picej
2021-11-19 13:06 ` [PATCH] regulator: fix memory leak Andrej Picej
2022-03-01 8:21 ` Andrej Picej
2022-03-01 8:47 ` Sascha Hauer
2022-03-01 9:01 ` Andrej Picej
2021-11-19 9:54 ` Andrej Picej [this message]
2021-11-19 9:54 ` [PATCH v2 6/6] documentation: regulator: add allow-dummy-supply Andrej Picej
2021-11-25 7:30 ` [PATCH v2 0/6] PHYTEC patches to be mainlined Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211119095429.1905473-6-andrej.picej@norik.com \
--to=andrej.picej@norik.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox