From: Sascha Hauer <sha@pengutronix.de>
To: Michael Riesch <michael.riesch@wolfvision.net>
Cc: barebox@lists.infradead.org, Frank Wunderlich <frank-w@public-files.de>
Subject: Re: [PATCH v2 6/7] arm: rockchip: rk3568: refactor common rk3568_start method
Date: Wed, 21 Sep 2022 14:21:46 +0200 [thread overview]
Message-ID: <20220921122146.GD986@pengutronix.de> (raw)
In-Reply-To: <f78a05c7-3142-626c-3b02-f969c729b40f@wolfvision.net>
On Wed, Sep 21, 2022 at 01:57:25PM +0200, Michael Riesch wrote:
> Hi Sascha,
>
> On 9/21/22 11:17, Sascha Hauer wrote:
> > On Mon, Sep 19, 2022 at 01:39:47PM +0200, Michael Riesch wrote:
> >> After the removal of the IO domain configuration code, the low-level
> >> initialization is the same for all RK356x boards. Add a common
> >> method rk3568_start to remove this code duplication.
> >>
> >> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> >> ---
> >> arch/arm/boards/pine64-quartz64/lowlevel.c | 30 +----------------
> >> arch/arm/boards/radxa-rock3/lowlevel.c | 27 ---------------
> >> .../arm/boards/rockchip-rk3568-evb/lowlevel.c | 33 +------------------
> >> .../arm/mach-rockchip/include/mach/rockchip.h | 1 +
> >> arch/arm/mach-rockchip/rk3568.c | 24 ++++++++++++++
> >> 5 files changed, 27 insertions(+), 88 deletions(-)
> >>
> >> diff --git a/arch/arm/boards/pine64-quartz64/lowlevel.c b/arch/arm/boards/pine64-quartz64/lowlevel.c
> >> index b295885522..e1beb3e624 100644
> >> --- a/arch/arm/boards/pine64-quartz64/lowlevel.c
> >> +++ b/arch/arm/boards/pine64-quartz64/lowlevel.c
> >> @@ -1,39 +1,11 @@
> >> // SPDX-License-Identifier: GPL-2.0-only
> >> #include <common.h>
> >> -#include <linux/sizes.h>
> >> -#include <asm/barebox-arm-head.h>
> >> #include <asm/barebox-arm.h>
> >> -#include <mach/hardware.h>
> >> -#include <mach/atf.h>
> >> -#include <debug_ll.h>
> >> #include <mach/rockchip.h>
> >>
> >> extern char __dtb_rk3566_quartz64_a_start[];
> >>
> >> -static noinline void start_quartz64(void *fdt)
> >> -{
> >> - /*
> >> - * Image execution starts at 0x0, but this is used for ATF and
> >> - * OP-TEE later, so move away from here.
> >> - */
> >> - if (current_el() == 3)
> >> - relocate_to_adr_full(RK3568_BAREBOX_LOAD_ADDRESS);
> >> - else
> >> - relocate_to_current_adr();
> >> -
> >> - setup_c();
> >> -
> >> - if (current_el() == 3) {
> >> - rk3568_lowlevel_init();
> >> - rk3568_atf_load_bl31(fdt);
> >> - /* not reached */
> >> - }
> >> -
> >> - barebox_arm_entry(RK3568_DRAM_BOTTOM, 0x80000000 - RK3568_DRAM_BOTTOM,
> >> - fdt);
> >> -}
> >> -
> >> ENTRY_FUNCTION(start_quartz64a, r0, r1, r2)
> >> {
> >> - start_quartz64(__dtb_rk3566_quartz64_a_start);
> >> + rk3568_start(__dtb_rk3566_quartz64_a_start);
> >> }
> >
> > Here __dtb_rk3566_quartz64_a_start is accessed before setup_c() has been
> > called. That is not allowed, see the patch I just sent.
>
> Does the refactoring make sense to you in general? Can I change it to
>
> ENTRY_FUNCTION(start_my_fancy_board, r0, r1, r2)
> {
> setup_c();
> rk3568_start(__dtb_my_fancy_board_start);
> }
Well it's not only setup_c() but also the relocate_to_adr_full() or
relocate_to_current_adr() part that has to be called before setup_c().
At that point there is not much left to factor out to a common function.
Unless you want to turn this into preprocessor macros (and I don't
recommand doing that) my suggestion is that we just live with this bit
of code duplication.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2022-09-21 12:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 11:39 [PATCH v2 0/7] soc: rockchip: add driver for rockchip io domains Michael Riesch
2022-09-19 11:39 ` [PATCH v2 1/7] " Michael Riesch
2022-09-21 9:46 ` Sascha Hauer
2022-09-21 11:49 ` Michael Riesch
2022-09-22 8:03 ` Sascha Hauer
2022-09-22 8:13 ` Ahmad Fatoum
2022-09-22 8:23 ` Sascha Hauer
2022-09-19 11:39 ` [PATCH v2 2/7] arm: rockchip_v8_defconfig: enable io domain driver Michael Riesch
2022-09-19 11:39 ` [PATCH v2 3/7] arm: rockchip: radxa-rock3: remove io domain configuration Michael Riesch
2022-09-19 11:39 ` [PATCH v2 4/7] arm: rockchip: rk3568-evb: " Michael Riesch
2022-09-19 11:39 ` [PATCH v2 5/7] arm: rockchip: rk3568-bpi-r2pro: " Michael Riesch
2022-09-19 11:39 ` [PATCH v2 6/7] arm: rockchip: rk3568: refactor common rk3568_start method Michael Riesch
2022-09-21 9:17 ` Sascha Hauer
2022-09-21 11:57 ` Michael Riesch
2022-09-21 12:21 ` Sascha Hauer [this message]
2022-09-21 12:34 ` Michael Riesch
2022-09-19 11:39 ` [PATCH v2 7/7] arm: rockchip: rk3568-bpi-r2pro: use common method rk3568_start Michael Riesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220921122146.GD986@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=frank-w@public-files.de \
--cc=michael.riesch@wolfvision.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox