[PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-
2020-08-18 10:55 UTC (5+ messages)
` [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment
` [PATCH 3/5] sandbox: add sandbox.dtb to always-y
` [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux
` [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y
[PATCH v1] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present
2020-08-18 9:34 UTC
[PATCH] libfile: copy_file: Fix ftruncate called on device files
2020-08-18 9:20 UTC
[PATCH] video: ssd1307fb: Honour reset GPIO polarity
2020-08-18 6:58 UTC
[PATCH] arm: imx: RELOCATABLE default yes on IMX_MULTI_BOARDS
2020-08-17 11:03 UTC
[PATCH 1/3] ARM: vexpress: set stdout path
2020-08-17 10:31 UTC (5+ messages)
` [PATCH 2/3] ARM: vexpress: allow to select debug UART address
` [PATCH 3/3] ARM: vexpress: enable KALLSYMS in defconfig
[PATCH] fixup! of: base: register DT root as device
2020-08-17 10:12 UTC
v2020.08.0
2020-08-17 9:28 UTC
[PATCH v4 0/7] prepare Protonic board code for mainline
2020-08-17 8:19 UTC (8+ messages)
` [PATCH v4 1/7] of: base: register DT root as device
` [PATCH v4 2/7] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v4 3/7] common: console_common: add of_console_get_by_alias() helper
` [PATCH v4 4/7] of: of_device_get_match_compatible() helper
` [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code
` [PATCH v4 6/7] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
` [PATCH v4 7/7] ARM: dts: imx6q-prti6q: add pstore/ramoops node
[PATCH v3 0/6] prepare Protonic board code for mainline
2020-08-17 6:54 UTC (9+ messages)
` [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v3 2/6] common: console_common: add of_console_get_by_alias() helper
` [PATCH v3 3/6] of: of_device_get_match_compatible() helper
` [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code
` [PATCH v3 5/6] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
` [PATCH v3 6/6] ARM: dts: imx6q-prti6q: add pstore/ramoops node
[PATCH 1/3] video: add simple, transparent, bridge implementation
2020-08-17 6:38 UTC (4+ messages)
` [PATCH 2/3] video: ipuv3: parallel-display: support of_graph binding
` [PATCH 3/3] video: simple-panel: don't error out on unhandled ioctl command
[PATCH v1] string: add sanity check to the strcmp() and strncmp()
2020-08-17 6:26 UTC (2+ messages)
[PATCH] of: base: move memory init from DT to initcall
2020-08-17 6:06 UTC (2+ messages)
[PATCH fixup v1] of: base: register DT root as device
2020-08-17 4:45 UTC (11+ messages)
barebox:ubi attach time
2020-08-17 4:12 UTC (2+ messages)
[PATCH v6] FIT: Parse `load` and `entry` addresses
2020-08-14 13:22 UTC (2+ messages)
Some USB memory sticks not (fully) recognized
2020-08-14 13:21 UTC (7+ messages)
` [PATCH] Revert "usb: host: ehci: Use to USBSTS to wait for transfer completion"
[PATCH v4 00/13] usb: dwc2: Add host and gadget driver
2020-08-14 13:12 UTC (18+ messages)
` [PATCH v4 01/13] Revert "usb: Add dwc2 host driver"
` [PATCH v4 02/13] usb: dwc2: Add host controller driver
` [PATCH v4 03/13] usb: dwc2: host: Read dr_mode from device tree
` [PATCH v4 04/13] usb: dwc2: Rework roothub interface
` [PATCH v4 05/13] usb: dwc2: Rework timeout
` [PATCH v4 06/13] usb: dwc2: host: Handle dma mapping errors
` [PATCH v4 07/13] usb: dwc2: host: Dynamic fifo size support from Linux
` [PATCH v4 08/13] usb: dwc2: host: Fix toggle reset
` [PATCH v4 09/13] usb: dwc2: host: Rewrite dwc2_hc_init
` [PATCH v4 10/13] usb: dwc2: Add function to flush tx fifo
` [PATCH v4 11/13] usb: dwc2: Add structure for gadget driver
` [PATCH v4 12/13] usb: dwc2: Add "
` [PATCH v4 13/13] usb: dwc2: Use register_otg_device
[PATCH v6 00/20] Slices and fastboot over UDP
2020-08-13 13:42 UTC (21+ messages)
` [PATCH 01/20] Introduce slices
` [PATCH 02/20] Add workqueues
` [PATCH 03/20] ratp: Switch to workqueues
` [PATCH 04/20] net: Add a slice to struct eth_device
` [PATCH 05/20] net: mdiobus: Add slice
` [PATCH 06/20] usb: Add a slice to usb host controllers
` [PATCH 07/20] usbnet: Add slice
` [PATCH 08/20] net: Call net_poll() in a poller
` [PATCH 09/20] net: reply to ping requests
` [PATCH 10/20] usbnet: Be more friendly in the receive path
` [PATCH 11/20] globalvar: Add helper for deprecated variable names
` [PATCH 12/20] fastboot: rename usbgadget.fastboot_* variables to fastboot.*
` [PATCH 13/20] fastboot: Warn when cb_download is called with file still open
` [PATCH 14/20] fastboot: Add fastboot_abort()
` [PATCH 15/20] fastboot: init list head in common
` [PATCH 16/20] fastboot net: implement fastboot over UDP
` [PATCH 17/20] usb: fastboot: execute commands in command context
` [PATCH 18/20] Add WARN_ONCE() macro
` [PATCH 19/20] fs: Warn when filesystem operations are called from a poller
` [PATCH 20/20] Documentation: Add document about background execution in barebox
[PATCH v5 00/21] Slices and fastboot over UDP
2020-08-13 10:38 UTC (4+ messages)
` [PATCH 17/21] fastboot net: implement "
Enable Display/Splash on Phycore am335x with barebox 2020.01.0
2020-08-12 12:47 UTC (3+ messages)
[PATCH v5] FIT: Parse `load` and `entry` addresses
2020-08-12 12:32 UTC (6+ messages)
[PATCH] dtc_cpp: allow to pass options per target
2020-08-12 9:44 UTC (2+ messages)
[PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
2020-08-12 9:41 UTC (5+ messages)
` [PATCH v2 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM/MP
` [PATCH v2 3/4] ARM: nxp-imx8mm-evk: always set up UART
` [PATCH v2 4/4] nvmem: ocotp: add support for i.MX8MM
[PATCH] ARM: Layerscape: TQMLS1046a: remove ddr calc code
2020-08-12 9:38 UTC (2+ messages)
[PATCH v4 0/3] introduce board-driver support
2020-08-11 14:24 UTC (3+ messages)
` [PATCH v4 2/3] of: base: register DT root as device
[PATCH] console_countdown: Add CR as valid return key
2020-08-11 11:24 UTC (4+ messages)
[PATCH v2 00/13] prepare Protonic board code for mainline
2020-08-11 11:12 UTC (18+ messages)
` [PATCH v2 01/13] ARM: dts: imx6q-prti6q: fix PHY register
` [PATCH v2 02/13] ARM: dts: imx6: vicut1: fix network support
` [PATCH v2 03/13] of: base: register DT root as device
` [PATCH v2 04/13] ARM: embest-riotboard: port board file to the driver model
` [PATCH v2 05/13] net: port nvmem_get_mac_address() from linux kernel
` [PATCH v2 06/13] of: of_net: sync of_get_mac_address() with latest kernel version
` [PATCH v2 07/13] net: fec_imx: use of_get_mac_address() to get mac address out of DT
` [PATCH v2 08/13] of: of_device_get_match_compatible() helper
` [PATCH v2 09/13] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v2 10/13] common: console_common: add of_console_get_by_alias() helper
` [PATCH v2 11/13] ARM: protonic-imx6: port Protonic specific board code
` [PATCH v2 12/13] of: add barebox-serial driver
` [PATCH v2 13/13] ARM: dts: imx6q-prti6q: add barebox, serial-number node
[PATCH v3 00/14] usb: dwc2: Add host and gadget driver
2020-08-11 9:31 UTC (7+ messages)
` [PATCH v3 02/14] usb: dwc2: Add host controller driver
` [PATCH v3 14/14] usb: dwc2: Add ulpi phy function
[PATCH v1 00/11] prepare Protonic board code for mainline
2020-08-11 8:27 UTC (14+ messages)
` [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT
` [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code
` [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node
[PATCH] arm: baltos: export DIP switch value
2020-08-11 7:39 UTC (2+ messages)
[PATCH] kvx: exclude dtb from malloc zone
2020-08-11 7:34 UTC (2+ messages)
[PATCH] ARM: boards: phytec-som-imx6: Add mmc and emmc-boot bbu update handler
2020-08-10 20:00 UTC (2+ messages)
[PATCH 1/5] clk: imx7: add IMX7D_OCOTP_CLK
2020-08-10 19:54 UTC (2+ messages)
[PATCH v2] arm: baltos: add environment node
2020-08-10 19:48 UTC (2+ messages)
[PATCH] treewide: remove stale instances of struct device
2020-08-10 19:30 UTC (4+ messages)
[PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID
2020-08-10 12:20 UTC
[PATCH v2] bootm: add global.bootm.root_dev env var for booting via PARTUUID
2020-08-10 12:14 UTC
[PATCH] bootm: add global.bootm.root_dev env var for booting via PARTUUID
2020-08-10 12:08 UTC
[PATCH 00/11] ramfs: Use dynamically sized chunks
2020-08-10 11:13 UTC (4+ messages)
` [PATCH 04/11] fs: free inodes we no longer need
[PATCH 0/3] squashfs: Fix current master
2020-08-10 11:12 UTC (4+ messages)
` [PATCH 1/3] fs: squashfs: set s_op in time
` [PATCH 2/3] fs: squashfs: Do not free root inode
` [PATCH 3/3] fs: Use iget_locked() rather than squashfs specific function
[RFC PATCH v2 0/3] Introduce global.bootm.root_dev env var for booting via PARTUUID
2020-08-10 9:45 UTC (6+ messages)
` [RFC PATCH v2 1/3] bootm: add env var root_dev
` [RFC PATCH v2 2/3] globalvar: add bootm.root_dev
` [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev
[PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board
2020-08-10 9:33 UTC (7+ messages)
` [PATCH v2 1/2] mci: imx-esdhc-pbl: Add support for IMX7
` [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board
[PATCH 1/3] ARM: i.MX6 dtsi: add enet_out clock
2020-08-10 8:38 UTC (5+ messages)
` [PATCH 2/3] ARM: imx6ul: add fec bits to GPR syscon definition
` [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d
Getting serial console output on new imx7d tqma7 board UART4
2020-08-10 8:00 UTC (18+ messages)
[PATCH] spi: add coredevice_spi_driver macro as well
2020-08-10 6:38 UTC (2+ messages)
[PATCH] image: Convert the IH_... values to enums
2020-08-10 6:36 UTC (3+ messages)
` [PATCH] riscv: Makefile: make it possible to use riscv64 compiler
[PATCH 0/2] ARM: i.MX: Add support for IMX7 based board
2020-08-03 22:28 UTC (3+ messages)
` [PATCH 2/2] ARM: i.MX: Add atlascopco sxb board
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox