From: Sascha Hauer <s.hauer@pengutronix.de>
To: BAREBOX <barebox@lists.infradead.org>
Subject: [PATCH 12/27] mci: pxamci: probe from the device tree
Date: Sun, 16 Aug 2026 19:56:32 +0200 [thread overview]
Message-ID: <20260816-pxa3xx-v1-12-f3c3d7a6c43f@pengutronix.de> (raw)
In-Reply-To: <20260816-pxa3xx-v1-0-f3c3d7a6c43f@pengutronix.de>
The driver was probed by name only and took its configuration from
platform data. Nothing in tree ever registered that platform data, so the
gpio_power / setpower / init hooks were dead code, and the driver could
not be used from a device tree at all.
Match "marvell,pxa-mmc" and let mci_of_parse() pick up bus-width and the
other generic properties. The power switching goes away with the platform
data: the MCI core already gets a "vmmc" regulator from the device tree,
which is how the supply is described upstream.
mci_ops.init() stays, now as a stub: mci_card_probe() calls it without
checking it for NULL.
Assisted-by: Claude Opus 5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mci/pxamci.c | 47 +++++++++++++++++--------------------------
drivers/mci/pxamci.h | 1 -
include/mach/pxa/mci_pxa2xx.h | 12 -----------
3 files changed, 18 insertions(+), 42 deletions(-)
diff --git a/drivers/mci/pxamci.c b/drivers/mci/pxamci.c
index 5e26022729..236d4d97b4 100644
--- a/drivers/mci/pxamci.c
+++ b/drivers/mci/pxamci.c
@@ -13,10 +13,10 @@
#include <clock.h>
#include <init.h>
#include <mci.h>
+#include <of.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <mach/pxa/mci_pxa2xx.h>
#include <mach/pxa/pxa-regs.h>
#include "pxamci.h"
@@ -26,18 +26,6 @@
#define TX_TIMEOUT (250 * MSECOND)
#define CMD_TIMEOUT (100 * MSECOND)
-static int pxamci_set_power(struct pxamci_host *host, int on)
-{
- mci_dbg("on=%d\n", on);
- if (host->pdata && host->pdata->gpio_power > 0)
- gpio_set_value(host->pdata->gpio_power,
- !!on ^ host->pdata->gpio_power_invert);
- else if (host->pdata && host->pdata->setpower)
- host->pdata->setpower(&host->mci, on);
- mdelay(250);
- return 0;
-}
-
static void pxamci_start_clock(struct pxamci_host *host)
{
mmc_writel(START_CLOCK, MMC_STRPCL);
@@ -297,17 +285,16 @@ static void pxamci_set_ios(struct mci_host *mci, struct mci_ios *ios)
host->cmdat |= CMDAT_INIT;
- pxamci_set_power(host, 1);
pxamci_stop_clock(host);
mmc_writel(host->clkrt, MMC_CLKRT);
}
+/*
+ * The MCI core calls this unconditionally, so it has to exist even though
+ * there is nothing left to do here since the platform data went away.
+ */
static int pxamci_init(struct mci_host *mci, struct device *dev)
{
- struct pxamci_host *host = to_pxamci(mci);
-
- if (host->pdata && host->pdata->init)
- return host->pdata->init(mci, dev);
return 0;
}
@@ -322,7 +309,6 @@ static int pxamci_probe(struct device *dev)
struct resource *iores;
struct pxamci_host *host;
unsigned long rate;
- int gpio_power = -1;
int ret;
host = xzalloc(sizeof(*host));
@@ -344,6 +330,8 @@ static int pxamci_probe(struct device *dev)
host->mci.hw_dev = dev;
host->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mci_of_parse(&host->mci);
+
/*
* Calculate minimum clock rate, rounding up.
*/
@@ -360,20 +348,21 @@ static int pxamci_probe(struct device *dev)
mmc_writel(64, MMC_RESTO);
mmc_writel(0, MMC_I_MASK);
- host->pdata = dev->platform_data;
- if (host->pdata)
- gpio_power = host->pdata->gpio_power;
-
- if (gpio_power > 0)
- gpio_direction_output(gpio_power,
- host->pdata->gpio_power_invert);
-
- mci_register(&host->mci);
- return 0;
+ return mci_register(&host->mci);
}
+static __maybe_unused struct of_device_id pxamci_dt_ids[] = {
+ {
+ .compatible = "marvell,pxa-mmc",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, pxamci_dt_ids);
+
static struct driver pxamci_driver = {
.name = DRIVER_NAME,
.probe = pxamci_probe,
+ .of_compatible = DRV_OF_COMPAT(pxamci_dt_ids),
};
device_platform_driver(pxamci_driver);
diff --git a/drivers/mci/pxamci.h b/drivers/mci/pxamci.h
index 30119a5607..1879d9603b 100644
--- a/drivers/mci/pxamci.h
+++ b/drivers/mci/pxamci.h
@@ -77,7 +77,6 @@
struct pxamci_host {
struct mci_host mci;
void __iomem *base;
- struct pxamci_platform_data *pdata;
struct clk *clk;
unsigned int cmdat;
diff --git a/include/mach/pxa/mci_pxa2xx.h b/include/mach/pxa/mci_pxa2xx.h
deleted file mode 100644
index 299e543479..0000000000
--- a/include/mach/pxa/mci_pxa2xx.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-
-struct mci_host;
-struct device;
-
-struct pxamci_platform_data {
- int gpio_power;
- int gpio_power_invert;
- int (*init)(struct mci_host*, struct device*);
- int (*setpower)(struct mci_host*, int on);
-};
--
2.47.3
next prev parent reply other threads:[~2026-08-16 18:02 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-16 17:56 [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support Sascha Hauer
2026-08-16 17:56 ` [PATCH 01/27] ARM: pxa: remove PXA25x and PXA27x support Sascha Hauer
2026-08-16 17:56 ` [PATCH 02/27] video: remove the PXA framebuffer driver Sascha Hauer
2026-08-16 17:56 ` [PATCH 03/27] ARM: cache: drive the XSC3 cache with the ARMv4 functions Sascha Hauer
2026-08-16 17:56 ` [PATCH 04/27] mci: pxamci: get the clock from the clk API Sascha Hauer
2026-08-16 17:56 ` [PATCH 05/27] pwm: pxa: " Sascha Hauer
2026-08-16 17:56 ` [PATCH 06/27] serial: " Sascha Hauer
2026-08-16 17:56 ` [PATCH 07/27] clk: pxa: add a device tree clock driver for PXA3xx Sascha Hauer
2026-08-16 17:56 ` [PATCH 08/27] mtd: nand: nand_mrvl_nfc: honour marvell,nand-keep-config Sascha Hauer
2026-08-16 17:56 ` [PATCH 09/27] mtd: nand: nand_mrvl_nfc: support the nand-controller bindings Sascha Hauer
2026-08-16 17:56 ` [PATCH 10/27] mtd: nand: mrvl_nfc: keep the ready latch across a STATUS command Sascha Hauer
2026-08-16 17:56 ` [PATCH 11/27] mtd: nand: mrvl_nfc: do not report a command timeout as an error Sascha Hauer
2026-08-16 17:56 ` Sascha Hauer [this message]
2026-08-16 17:56 ` [PATCH 13/27] serial: pxa: add device tree support Sascha Hauer
2026-08-16 17:56 ` [PATCH 14/27] serial: pxa: provide the Linux console name Sascha Hauer
2026-08-16 17:56 ` [PATCH 15/27] gpio: pxa: add a driver and switch the architecture to GPIOLIB Sascha Hauer
2026-08-16 17:56 ` [PATCH 16/27] ARM: pxa: add DEBUG_LL support Sascha Hauer
2026-08-16 17:56 ` [PATCH 17/27] ARM: pxa: let the board select the SoC Sascha Hauer
2026-08-16 17:56 ` [PATCH 18/27] ARM: pxa: enable device tree support Sascha Hauer
2026-08-16 17:56 ` [PATCH 19/27] scripts: add pxa-image Sascha Hauer
2026-08-16 17:56 ` [PATCH 20/27] ARM: pxa: add a NAND first stage loader Sascha Hauer
2026-08-16 17:56 ` [PATCH 21/27] filetype: detect PXA3xx NTIM images Sascha Hauer
2026-08-16 17:56 ` [PATCH 22/27] ARM: pxa: add a barebox update handler for NAND Sascha Hauer
2026-08-16 17:56 ` [PATCH 23/27] clocksource: add a driver for the PXA OS timer and its watchdog Sascha Hauer
2026-08-16 17:56 ` [PATCH 24/27] ARM: pxa: move over to MULTIARCH Sascha Hauer
2026-08-16 17:56 ` [PATCH 25/27] ARM: pxa: reset straight away and without complaining Sascha Hauer
2026-08-16 17:56 ` [PATCH 26/27] ARM: pxa: add Raumfeld Speaker board support Sascha Hauer
2026-08-16 17:56 ` [PATCH 27/27] ARM: multi_v5_v6_defconfig: enable PXA support Sascha Hauer
2026-08-17 7:35 ` [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support Ahmad Fatoum
2026-08-19 9:26 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260816-pxa3xx-v1-12-f3c3d7a6c43f@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox