mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: BAREBOX <barebox@lists.infradead.org>
Subject: [PATCH 27/27] ARM: multi_v5_v6_defconfig: enable PXA support
Date: Sun, 16 Aug 2026 19:56:47 +0200	[thread overview]
Message-ID: <20260816-pxa3xx-v1-27-f3c3d7a6c43f@pengutronix.de> (raw)
In-Reply-To: <20260816-pxa3xx-v1-0-f3c3d7a6c43f@pengutronix.de>

Enable PXA support along with the Raumfeld Speaker board and PXA peripherals.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/multi_v5_v6_defconfig | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/arm/configs/multi_v5_v6_defconfig b/arch/arm/configs/multi_v5_v6_defconfig
index bc6645b3ce..5f71ec0fd8 100644
--- a/arch/arm/configs/multi_v5_v6_defconfig
+++ b/arch/arm/configs/multi_v5_v6_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_BCM283X=y
 CONFIG_ARCH_IMX=y
+CONFIG_ARCH_PXA=y
 CONFIG_ARCH_VERSATILE=y
 CONFIG_MACH_RPI=y
 CONFIG_MACH_SCB9328=y
@@ -8,15 +9,15 @@ CONFIG_MACH_PCA100=y
 CONFIG_MACH_PCM038=y
 CONFIG_IMX_IIM=y
 CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_BOARD_GENERIC_DT=y
+CONFIG_BAREBOX_UPDATE_PXA_NAND=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
 CONFIG_AEABI=y
-CONFIG_BOOT_ATAGS=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
+CONFIG_BOOT_ATAGS=y
 CONFIG_NAME="multi_v5_v6_defconfig"
 CONFIG_MMU=y
 CONFIG_MALLOC_SIZE=0x0
-CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_PANIC_HANG=y
 CONFIG_HUSH_FANCY_PROMPT=y
@@ -26,10 +27,9 @@ CONFIG_MENU=y
 CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
 CONFIG_BLSPEC=y
-CONFIG_CONSOLE_ACTIVATE_ALL_FALLBACK=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+# CONFIG_BOOT_DEFAULTS is not set
 CONFIG_RESET_SOURCE=y
 CONFIG_LONGHELP=y
 CONFIG_CMD_IOMEM=y
@@ -81,7 +81,9 @@ CONFIG_NET=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_OF_BAREBOX_DRIVERS=y
 CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_DRIVER_SERIAL_PXA=y
 CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_DRIVER_NET_SMC911X=y
 CONFIG_DRIVER_NET_SMC91111=y
 CONFIG_NET_USB=y
 CONFIG_NET_USB_ASIX=y
@@ -94,6 +96,7 @@ CONFIG_CFI_BUFFER_WRITE=y
 CONFIG_NAND=y
 CONFIG_NAND_ALLOW_ERASE_BAD=y
 CONFIG_NAND_IMX=y
+CONFIG_NAND_MRVL_NFC=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_USB_HOST=y
@@ -110,6 +113,8 @@ CONFIG_EEPROM_AT25=y
 CONFIG_EEPROM_AT24=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_IMX=y
+CONFIG_GPIO_PXA=y
+# CONFIG_PINCTRL is not set
 CONFIG_IMX_WEIM=y
 CONFIG_GENERIC_PHY=y
 CONFIG_USB_NOP_XCEIV=y
@@ -120,7 +125,6 @@ CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_UBIFS=y
 CONFIG_FS_UBIFS_COMPRESSION_LZO=y
+CONFIG_FS_QEMU_FW_CFG=y
 CONFIG_DIGEST_SHA1_ARM=y
 CONFIG_DIGEST_SHA256_ARM=y
-CONFIG_QEMU_FW_CFG=y
-CONFIG_FS_QEMU_FW_CFG=y

-- 
2.47.3




  parent reply	other threads:[~2026-08-16 18:16 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-16 17:56 [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support Sascha Hauer
2026-08-16 17:56 ` [PATCH 01/27] ARM: pxa: remove PXA25x and PXA27x support Sascha Hauer
2026-08-16 17:56 ` [PATCH 02/27] video: remove the PXA framebuffer driver Sascha Hauer
2026-08-16 17:56 ` [PATCH 03/27] ARM: cache: drive the XSC3 cache with the ARMv4 functions Sascha Hauer
2026-08-16 17:56 ` [PATCH 04/27] mci: pxamci: get the clock from the clk API Sascha Hauer
2026-08-16 17:56 ` [PATCH 05/27] pwm: pxa: " Sascha Hauer
2026-08-16 17:56 ` [PATCH 06/27] serial: " Sascha Hauer
2026-08-16 17:56 ` [PATCH 07/27] clk: pxa: add a device tree clock driver for PXA3xx Sascha Hauer
2026-08-16 17:56 ` [PATCH 08/27] mtd: nand: nand_mrvl_nfc: honour marvell,nand-keep-config Sascha Hauer
2026-08-16 17:56 ` [PATCH 09/27] mtd: nand: nand_mrvl_nfc: support the nand-controller bindings Sascha Hauer
2026-08-16 17:56 ` [PATCH 10/27] mtd: nand: mrvl_nfc: keep the ready latch across a STATUS command Sascha Hauer
2026-08-16 17:56 ` [PATCH 11/27] mtd: nand: mrvl_nfc: do not report a command timeout as an error Sascha Hauer
2026-08-16 17:56 ` [PATCH 12/27] mci: pxamci: probe from the device tree Sascha Hauer
2026-08-16 17:56 ` [PATCH 13/27] serial: pxa: add device tree support Sascha Hauer
2026-08-16 17:56 ` [PATCH 14/27] serial: pxa: provide the Linux console name Sascha Hauer
2026-08-16 17:56 ` [PATCH 15/27] gpio: pxa: add a driver and switch the architecture to GPIOLIB Sascha Hauer
2026-08-16 17:56 ` [PATCH 16/27] ARM: pxa: add DEBUG_LL support Sascha Hauer
2026-08-16 17:56 ` [PATCH 17/27] ARM: pxa: let the board select the SoC Sascha Hauer
2026-08-16 17:56 ` [PATCH 18/27] ARM: pxa: enable device tree support Sascha Hauer
2026-08-16 17:56 ` [PATCH 19/27] scripts: add pxa-image Sascha Hauer
2026-08-16 17:56 ` [PATCH 20/27] ARM: pxa: add a NAND first stage loader Sascha Hauer
2026-08-16 17:56 ` [PATCH 21/27] filetype: detect PXA3xx NTIM images Sascha Hauer
2026-08-16 17:56 ` [PATCH 22/27] ARM: pxa: add a barebox update handler for NAND Sascha Hauer
2026-08-16 17:56 ` [PATCH 23/27] clocksource: add a driver for the PXA OS timer and its watchdog Sascha Hauer
2026-08-16 17:56 ` [PATCH 24/27] ARM: pxa: move over to MULTIARCH Sascha Hauer
2026-08-16 17:56 ` [PATCH 25/27] ARM: pxa: reset straight away and without complaining Sascha Hauer
2026-08-16 17:56 ` [PATCH 26/27] ARM: pxa: add Raumfeld Speaker board support Sascha Hauer
2026-08-16 17:56 ` Sascha Hauer [this message]
2026-08-17  7:35 ` [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support Ahmad Fatoum
2026-08-19  9:26 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260816-pxa3xx-v1-27-f3c3d7a6c43f@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox